BMW Coding List – Verified Tweaks for F, G & I Series

Cheat Sheet

Coding options sheet

Search by module:

Search by text:

Favorite list

Do you have a coding that is not listed?

You can share it with us

Number of codings: 575

Last update: 2025-04-23 00:38:17

Add to favorite F10/F11 – Enable Paddle Shifters (for Retrofits)

Model: F10

1. SZL -> 3000 -> Lenkrad_Schaltpaddles -> - set to aktiv

Add to favorite F10/F11 – Show Digital Speed in MPH in Cluster

Model: F10

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv-werte=01

Add to favorite F10/F11 – Auto Light Sensitivity Increase

Model: F10

1. JBBF -> 3530 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> - set to see notes
2. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ -> - set to see notes

Notes:

normal = normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Add to favorite F10/F11 – Auto Wiper Sensitivity Increase

Model: F10

1. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_1 -> - set to werte=05
2. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_2 -> - set to werte=09
3. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_3 -> - set to werte=0D

Add to favorite F10/F11 – Disable Headlight Washers

Model: F10

1. JBBF -> 3000 -> SCHEINWERFERREINIGUNG -> - set to nicht_aktiv

Add to favorite F10/F11 – Always Remember Air ReCirculating

Model: F10

1. IHKA -> 3000 -> MEMORY_UMLUFT -> - set to aktiv

Add to favorite F10/F11 – Enable Developer Menu

Model: F10

1. HU_NBT -> 3000 -> ENTWICKLER_MENUE -> - set to aktiv 01

Add to favorite F10/F11 – Enable WiFi Hot-Spot

Model: F10

1. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_COVERART -> - set to aktiv
2. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_VIDEO -> - set to aktiv
3. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP -> - set to aktiv
4. HU_NBT -> 3003 -> WLAN_STATUS -> - set to aktiv
5. HU_NBT -> 3003 -> WLAN_MODUS -> - set to ap
6. HU_NBT -> 3003 -> WLAN_SIGNAL_STRENGTH -> - set to outdoor

Notes:

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)

Add to favorite F10/F11 – Enable IPCE Web Server @ 172.16.222.1

Model: F10

1. HU_NBT -> 3000 -> IPCE_WEBSERVER -> - set to aktiv

Add to favorite F10/F11 – Change i-Drive Animation to ///M Logo

Model: F10

1. HU_NBT -> 3001 -> STARTUP_EMBLEM -> - set to variant_01

Add to favorite F10/F11 – Enable Time-Stamp Display for Call Log

Model: F10

1. HU_NBT -> 3003 -> TIMESTAMP_DISPLAY -> - set to aktiv

Add to favorite F10/F11 – Enable Speech Input for E-Mail or SMS

Model: F10

1. HU_NBT -> 3003 -> SPEECH_2_TEXT -> - set to aktiv

Add to favorite F10/F11 – Disable Audible Chirp/Beep When Locking Car

Model: F10

1. HU_NBT -> 3000 -> ACOUSTICAL_LOCK_CONFIRM -> - set to nicht_aktiv

Add to favorite F01/F10/F11 – Add Weather Band Radio (CIC Only)

Model: F01

1. HU_CIC -> 3002 -> RADIO_WEATHERBAND -> - set to aktiv

Add to favorite F10/F11 – Navi Trip-Import

Model: F10

1. HU_CIC/NBT -> 3000 -> NAVI_TRIP_IMPORT -> - set to aktiv

Add to favorite F10/F11 – Enable Sports Displays

Model: F10

1. HU_CIC/NBT -> 3000 -> EFF_DYN_SPORT_CID -> - set to aktiv
2. HU_CIC/NBT -> 3000 -> EFF_DYN_SPORT_UNIT -> - set to aktiv
3. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> DREHMOMENT -> - set to lb_ft (displays ft lb)
4. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> LEISTUNG -> - set to ps (displays hp)

Add to favorite F10/F11 – Enable Active Sound Design Configuration Menu

Model: F10

1. HU_CIC/NBT -> 3000 -> ASD_CONFIGURATION -> - set to aktiv
2. HU_CIC/NBT -> 3000 -> ASD_SOUND_4 -> - set to aktiv

Add to favorite F10/F11 – Disable Active Sound Design (///M5 Only)

Model: F10

1. HU_CIC/NBT -> 3000 -> ASD_SOUND_OFF -> - set to aktiv

Add to favorite F10/F11 – Enable ///M LapTimer

Model: F10

1. HU_CIC/NBT -> 3000 -> M_LAPTIMER -> - set to aktiv

Add to favorite F10/F11 – Disable Auto-Locking of Doors once begin driving

Model: F01

1. HU_CIC/NBT -> 3000 -> DOOR_LOCK_AFTER_DRIVING_AWAY -> - set to nicht_aktiv

Add to favorite F10/F11 – Enable Siri Voice Control

Model: F10

1. HU_CIC/NBT -> 3003 -> CE_DEVICE_SPEECH_RECOGNITION -> - set to aktiv

Add to favorite F10/F11 – Code for LED Turn-Signal Bulb replace halogens (on Xenon Light Package for LCIs)

Model: F10

1. FRM -> ????? -> FRA_V_L_KALTUEBERWACHUNG -> - set to nicht_aktiv
2. FRM -> ????? -> FRA_V_L_WARMUEBERWACHUNG -> - set to nicht_aktiv
3. FRM -> ????? -> FRA_V_L_IS_LED -> - set to aktiv
4. FRM -> ????? -> FRA_V_R_KALTUEBERWACHUNG -> - set to nicht_aktiv
5. FRM -> ????? -> FRA_V_R_WARMUEBERWACHUNG -> - set to nicht_aktiv
6. FRM -> ????? -> FRA_V_R_IS_LED -> - set to aktiv

Add to favorite F10/F11 – Ambiance Lighting Brightness Settings

Model: F10

1. Ambient brightness Upper limit for the ambient brightness - FRM -> -> CS_AMB_BRIGHTNESS -> 64 (seeing as the below setting is a HEX value, thus I assume this setting is also in HEX, which makes this 100) set to ?????
2. Min Amb brightness Lower limit of the ambient brightness - FRM -> -> CS_AMB_MIN_BRIGHTNESS -> 0A (In decimal this is 10) set to ?????
3. Max amb brightness offset Brightness for PWM output as a percentage physical value of 20% ... 80% - FRM -> -> CS_AMB_MAX_OFFSET -> 30 set to ?????

Add to favorite F10/F11 – Ambiance Lighting controlled independent from Dimmer Switch

Model: F10

1. FRM -> -> AMBIENTE_NACHFUEHRUNG -> - set to nicht_aktiv

Add to favorite F10/F11 – Angel-Eyes Full Brightness (with headights on)

Model: F10

1. FRM -> 3060 -> U_EFF_POL -> - set to wert_05__13,0V

Add to favorite F10/F11 – Additional Coding Needed for Euro Adaptive LED Headlight Coding

Model: F10

1. FRM -> 3080 -> LAMP_MAP_PARA_SATZ_01 -> - set to BV_F010_PL_L_ueber_POL_L
2. FRM -> 3080 -> LAMP_MAP_PARA_SATZ_02 -> - set to BV_F010_PL_R_ueber_POL_R

Add to favorite F10/F11 – Enable Launch Control

Model: F10

1. EGS -> 3000 -> LC -> - set to aktiv

Add to favorite F10/F11 – Start Car by pushing button (hold brake not needed)

Model: F10

1. CAS -> 3000 -> TC_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. CAS -> 3000 -> TC_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Notes:

New Procedures is as mentioned:
- press once for iDrive and fuel pump;
- press a second time and hold to crank engine.

Add to favorite F10/F11 – Unlock all doors with engine off (Single-Pull Handles)

Model: F10

1. CAS -> 3002 -> ER-KEYOUT_AUTOVR -> - set to aktiv – werte=01

Add to favorite F10 – Disable Active Sound Design (///M5 Only)

Model: F10

1. ASD -> 3000 -> Model Range -> - set to F021

Add to favorite F10/F11 – Disable Welcome 3 Gongs

Model: F10

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv

Add to favorite F10/F11 – Re-Code for Sports Automatic Transmission

Model: F10

Notes:

1. MODIFY THE READ FA - Change 205 to 2TB from the vehicle FA.
2. VO CODE - EGS, ICM and KOMBI.

Add to favorite F10/F11 – Re-Code for Enhanced Bluetooth

Model: F10

Notes:

1. Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

2. VO Code HU_NBT:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code HU_NBT Module … or re-code if coding was already present

Add to favorite F10/F11 – Re-Code for Dazzle Headlights (LED Adaptive Headlights like EU-Spec)

Model: F10

Notes:

1. Change FA (VO) to Remove 5AP & 8S4 from VO

2. VO Code FRM Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

3. VO Code KAFAS2 Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code FRM or KAFAS2 Modules … or re-code if coding was already present

Add to favorite F10 – Cruise Control & LIM

Model: F10

1. Max and min speed For ACC (Active Cruise control) - ICM_QL -> 3000 -> LDM_Wunschgeschw_ACC_max_kmh -> ????? set to ????? (Hexadecimal values. Convert HEX to decimal and then multiply by 5, Default 180 kmh/100 mph)
2. Max and min speed For ACC (Active Cruise control) - ICM_QL -> 3000 -> LDM_Wunschgeschw_ACC_max_mph -> ????? set to ????? (Hexadecimal values. Convert HEX to decimal and then multiply by 5, Default 180 kmh/100 mph)
3. ICM_QL -> 3000 -> LDM_Wunschgeschw_min_kmh -> ????? set to ????? (Hexadecimal values. Convert and use directly, Defaults 30 kph, 20 mph)
4. ICM_QL -> 3000 -> LDM_Wunschgeschw_min_mph -> ????? set to ????? (Hexadecimal values. Convert and use directly, Defaults 30 kph, 20 mph)

Add to favorite F10 – Enable the “LIM” function with Cruise Control button

Model: F10

1. ICM_QL -> 3000 -> LDM_SLD_Funktion -> aus set to ein (As presently configured, you have three redundant ways to set the CC speed (the SET button, the RES button and the rocker switch). With the change in coding, now you will have a new function activated by the SET button (the LIM function) and the rocker switch/RES will be your way of setting the CC speed)
2. ICM_QL -> 3000 -> LDM_Umschaltung_ACC_DCC -> unterdruecken set to zulassen (F10 =ICM-> 3000 Daten,F8-> C_Umschaltung_ACC_DCC)
3. KOMBI -> 3003 -> SLD_ENABLE -> nicht_aktiv set to aktiv (F10 = ICM-> 3000 Daten,F8-> C_SLD_FUNKTION?)
4. ICM_QL -> 3000 -> LDM_SET_Taste -> SET_und_aktivieren__IO set to nur_SET__O (LIM/SET button only works with LIM (use rocker for set Cruise Control), Not in F10 2011?)

Add to favorite F10/F11 – Activate Side Cameras at ANY Speed

Model: F10

1. TRSVC -> 3000 -> SV_Activate_Speed_Limit -> - set to initwert / Werte=0F
2. TRSVC -> 3000 -> SV_Deactivate_Speed -> - set to initwert / Werte=0F

Add to favorite F10/F11 – Adjust Driver and Passenger seat cooling default temperature for each of the 3 settings

Model: F10

1. Driver Seat cooler position 1 cushion Werte=1A(26deg) - SM (6d) -> 3002 -> KL_T_SOLL_L1 -> 23 set to 1A
2. Driver Seat cooler position 1 cushion Werte=17(23deg) - SM (6d) -> 3002 -> KL_T_SOLL_L2 -> 21 set to 17
3. Driver Seat cooler position 1 cushion Werte=13(19deg) - SM (6d) -> 3002 -> KL_T_SOLL_L3 -> 1E set to 13
4. Driver Seat cooler position 1 back Werte=1A(26deg) - SM (6d) -> 3002 -> KL_T_SOLL_K1 -> 23 set to 1A
5. Driver Seat cooler position 1 back Werte=17(23deg) - SM (6d) -> 3002 -> KL_T_SOLL_K2 -> 21 set to 17
6. Driver Seat cooler position 1 back Werte=13(19deg) - SM (6d) -> 3002 -> KL_T_SOLL_K3 -> 1E set to 13
7. Delay to automatically fall from seat cooling setting 3 to 2 - SM (6d) -> 3002 -> STUFE3_hold_30s -> 20 (15 minutes) set to 06 (3 minutes)
8. Passenger Seat cooler position 1 cushion Werte=1A(26deg) - SM (6e) -> 3002 -> KL_T_SOLL_L1 -> 23 set to 1A
9. Passenger Seat cooler position 1 cushion Werte=1A(26deg) - SM (6e) -> 3002 -> KL_T_SOLL_L2 -> 21 set to 17
10. Passenger Seat cooler position 1 cushion Werte=13(19deg) - SM (6e) -> 3002 -> KL_T_SOLL_L3 -> 1E set to 13
11. Passenger Seat cooler position 1 back Werte=1A(26deg) - SM (6e) -> 3002 -> KL_T_SOLL_K1 -> 23 set to 1A
12. Passenger Seat cooler position 1 back Werte=17(23deg) - SM (6e) -> 3002 -> KL_T_SOLL_K2 -> 21 set to 17
13. Passenger Seat cooler position 1 back Werte=13(19deg) - SM (6e) -> 3002 -> KL_T_SOLL_K3 -> 1E set to 13

Add to favorite F10/F11 – Enable Rear-View Camera at all Speeds

Model: F10

1. PDC -> 3009 -> D_SCHWELLE_1 -> ????? set to Werte = FF
2. PDC -> 3009 -> D_SCHWELLE_2 -> ????? set to Werte = FF
3. PDC -> 3009 -> V_SCHWELLE_1 -> ????? set to Werte = FF
4. PDC -> 3009 -> V_SCHWELLE_2 -> ????? set to Werte = FF

Add to favorite F10/F11 – Enable Night Vision with Background Pedestrian Detection

Model: F10

1. KOMBI -> 3003 -> FGS_NIVI_KI_ENABLE -> nicht_aktiv set to aktiv (One problem (in the F10) with the system is that the camera has to be turned on and actively showing the image before pedestrian warnings can be issued. Very few of us run around with the infrared camera urned on occupying most of the central information display. With the changes below, your system will essentially be on at all times (at night of course), monitoring for pedestrians in the background and providing you warnings via the cluster and/or the HUD)
2. NIVI2 -> 3253 -> PED_DET_IN_BACKGROUND -> OFF set to ON
3. NIVI2 -> 3000 -> CC_Messages -> ACTIVE_NV2 set to ACTIVE_NV2P_BD (Not useful without PED_DET_IN_BACKGROUND & FGS_NIVI_KI_ENABLE)
4. NIVI2 -> 3000 -> Light_Sensor -> ON_WITH_RLS_INFO set to ON_WITH_PWR_ON (Not useful without PED_DET_IN_BACKGROUND & FGS_NIVI_KI_ENABLE)
5. NIVI2 -> 3250 -> USE_ACUTE_WARNING -> AW_OFF set to AW_ON (Not useful without PED_DET_IN_BACKGROUND & FGS_NIVI_KI_ENABLE)
6. NIVI2 -> 3250 -> USE_ACUTE_SOUND -> AW_OFF set to AW_ON (Not useful without PED_DET_IN_BACKGROUND & FGS_NIVI_KI_ENABLE)
7. NIVI2 -> 3252 -> R1_ACTIVE -> AW_OFF set to AW_ON (Not useful without PED_DET_IN_BACKGROUND & FGS_NIVI_KI_ENABLE)
8. NIVI2 -> 3253 -> PED_DET_IN_BACKGROUND -> OFF set to ON (This is key for Night Vision in the background)
9. NIVI2 -> 3253 -> BD_MINIMUM_SPEED -> Werte=08 set to Werte=00 (This will allow detection of pedestrians at any speed. Normally this is only active at speeds of 8 mph or higher)
10. NIVI2 -> 3240 -> DTC_ENABLE_13 -> CL15on-DTCon - BD disabled set to CL15on-DTCon - BD enabled (No BD-Enabled or BD Disabled? What would be the Werte value?)

Add to favorite F10/F11 – Enables the Reverse Gear Gong for Japan

Model: F10

1. KOMBI -> 3000 Anzeige_Konfiguration -> R_GANG_AKUSTIK_ENABLE -> nicht_aktiv set to aktiv

Add to favorite F10/F11 – HUD Display

Model: F10

1. Change HUD Startup Screen Time - KOMBI -> 3000 Anzeige_Konfiguration -> HUD_START_UP_SCREEN_ANZ_ZEIT -> - set to User Value (Value in seconds. 0s = no display)
2. Enable Radio Menu in HUD - KOMBI -> 3000 Anzeige_Konfiguration -> HUD_ENTERTAINMENT_ENABLE -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
3. Enables recent calls list to be displayed - KOMBI -> 3000 Anzeige_Konfiguration -> HUD_TELEFONANRUF_ENABLE -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
4. Doesn’t seem to do anything, should display full contact list - KOMBI -> 3000 Anzeige_Konfiguration -> HUD_TELEFONBUCH_ENABLE -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
5. Display voice command on HUD - KOMBI -> 3000 Anzeige_Konfiguration -> HUD_SPRACHEINGABE_ENABLE -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
6. Display Lane Change on HUD - KOMBI -> 3000 Anzeige_Konfiguration -> HUD_TLC_ENABLE -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Sets the clock via GPS signal

Model: F10

1. KOMBI -> 3000 Anzeige_Konfiguration -> GPS_UHR -> nicht_aktiv set to aktiv

Add to favorite F10/F11 – Increase vibration for lane departure warning

Model: F10

1. KAFAS -> 3006 TLC_ACTUATOR -> VIBRATION_VALUE -> Werte=06,07,08,08,09,… set to Werte = 16, 17, 18, 18, 19, 19, 1A, 1B

Add to favorite F10/F11 – Lane Departure

Model: F10

1. KAFAS -> 3000 TLC_CODING -> ANZEIGEVARIANTE -> anz_var_04 set to anz_var_02 (Lane departure warning system, The display in the instrument cluster (and HUD): No lines shown by default. They only show up (along with the two triangles) when at least one lane marking (or a curb) are detected)
2. KAFAS -> 3000 TLC_CODING -> ROAD_EDGE_WARNING_ENABLED -> nicht_aktiv / Werte=00 set to aktiv / Werte=grass_curb (As presently set, it detects only road markings (i.e. painted lane markings). With the following code change, it can also detect grass and road sides)

Add to favorite F10/F11 – A/C System Remembers Last Setting

Model: F10

1. IHKA -> 3000 IHKA_Codierdaten -> OFF_MEMORY -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10 – Lane Departure

Model: F10

1. Active blind spot minimum speed activation setting - ICM -> 3000 Daten -> Hc2_i_CPar_Aktiv_v_low -> 50 km/h set to 25 kmh (Does not work below 25 kmh - gives a system error)
2. --- OR --- - ICM -> 3000 -> HcSwcCPar_i_Hc2_Aktiv_v_low -> - set to 25 kmh (Does not work below 25 kmh - gives a system error)

Add to favorite F10/F11 – Add GPS current position in Navi menu

Model: F10

1. HU_CIC -> 3000 HMI -> NAVI_POSITION_MENU -> nicht_aktiv set to aktiv

Add to favorite F10/F11 – Add Pressure and Temperature Readings to the TPMS Screen

Model: F10

1. HU_CIC/NBT -> 3001 -> RDC_SAFETY -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Remove Legal disclaimers (Navi, PDC & Side View)

Model: F10

1. Disables iDrive legal disclaimer during iDrive startup - HU_CIC/NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> ld_mit_timeout set to kein_ld
2. Disables camera legal disclaimer shown on PDC and Sideview - HU_CIC/NBT -> 3001 -> MACRO_NIVICAM_LDISCLAIMER -> ld_mit_timeout set to kein_ld
3. Disables camera legal disclaimer shown on Night Vision - HU_CIC -> 3001 -> VIDEO_NUR_MIT_HANDBREMSE -> ld_mit_timeout set to kein_ld
4. Disables camera legal disclaimer shown on Night Vision - HU_NBT -> 3001 -> MACRO_NVICAM_LDISCLAIMER -> - set to kein_ld

Add to favorite F10/F11 – DVD in Motion

Model: F10

1. HU_CIC/NBT -> 3000 HMI -> SPEEDLOCK_X_KMH_MAX -> 3_kmh = 3 or 8_kmh = 8 set to value = FF
2. HU_CIC/NBT -> 3000 HMI -> SPEEDLOCK_X_KMH_MIN -> 3_kmh = 3 or 8_kmh = 8 set to value = FF
3. HU_CIC -> 3000 HMI -> VIDEO_NUR_MIT_HANDBREMSE -> - set to nicht_aktiv / Werte=00
4. HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> - set to nicht_aktiv
5. HU_NBT -> 3000 -> VIDEO_FRONT_LOCKED -> - set to nicht_aktiv
6. HU_NBT -> 3000 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none=00

Add to favorite F10/F11 – Navi Fuel-Stop Proposal Along Route

Model: F10

1. HU_CIC -> 3000 HMI -> NAVI_FUELSTOP_PROPOSAL -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Turn Signals in HUD

Model: F10

1. Enable Turn Signals in HUD - HU_NBT -> 3001 -> HUD_TURNSIGNAL -> - set to aktiv
2. Add Turn-Signals to HUD - KOMBI -> 3000 -> BLINKER_HUD_ENABLE -> - set to aktiv
3. Show Turn Signals in HUD - KOMBI -> 3008 -> HUD_PIA_BLINKER -> - set to aktiv
4. Show Turn Signals in HUD - KOMBI -> 3000 -> BLINKER_HUD_ENABLE -> - set to aktiv

Add to favorite F10/F11 – Close/Open Rear Hatch from Fob & Kick Panel

Model: F10

1. Button on driver-side will be enabled to CLOSE the trunk - HKFM -> 3010 -> SCH_TOEHKI -> nicht_aktiv / Werte=00 set to aktiv / Werte=01 (Does not work immediately; Allow for some time before it begins to work)
2. Button on key fob will be enabled to CLOSE the trunk - HKFM -> 3010 -> SCH_FBD -> nicht_aktiv / Werte=00 set to aktiv / Werte=01 (Does not work immediately; Allow for some time before it begins to work)
3. Use w/ Above SCH_TOEHKI & SCH_FBD - HKFM -> 3010 -> TASTER_FBD -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Choose which lights for Welcome lights

Model: F10

1. Low Beam - FRM -> 3050 -> WL_FUNKTION_AL -> nicht_aktiv / Werte=00 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp))
2. High Beam - FRM -> 3050 -> WL_FUNKTION_FL -> nicht_aktiv / Werte=00 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp))
3. License Plate Lights - FRM -> 3050 -> WL_FUNKTION_KZL -> hard_on / Werte=02 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp))
4. Fog Lights - FRM -> 3050 -> WL_FUNKTION_NSW -> nicht_aktiv / Werte=00 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp))
5. Position Lights (Angel Eyes and Front Side LED's) - FRM -> 3050 -> WL_FUNKTION_POL -> hard_on / Werte=02 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp))
6. Tail Lights - FRM -> 3050 -> WL_FUNKTION_SSL -> hard_on / Werte=02 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (0 = Off; 1 = Soft (log); 2 = Hard (instant on); 3 = Soft (exp))
7. Welcome Light: Activation time - FRM -> 3050 -> WL_TIMEOUT -> wert_01 / Werte=14 set to nicht_aktiv / soft_on / hard_on / soft_on_LED (NOT TESTED)

Add to favorite F10/F11 – Fog Lights stay on w/ High Beams

Model: F10

1. FRM -> 3050 -> NSW_AUS_BEI_FL -> aktiv / Werte=01 set to nicht_aktiv / Werte=00

Add to favorite F10/F11 – Enable High Beam assistant automatic activation

Model: F10

1. High Beam Assistant is installed [1/4] - FRM -> 3050 -> FLA_VERBAUT -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
2. Set High Beam Assistant Default to Automatic [2/4] - FRM -> 3050 -> FLA_AUTO_AKTIV -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
3. Enable High Beam Assistant [3/4] - HU_CIC -> 3000 HMI -> HIGH_BEAM_ASSISTANT -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
4. Enable High Beam Assistant [4/4] - KAFAS -> 3015 -> FLA_ON_OFF -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Enable/Disable Daytime Running Lights (DRL)

Model: F10

1. FRM -> 3050 -> DRL_MODUS -> drl_s / Werte=03 set to nicht_aktiv / drl_h / drl_l / drl_s / tfl_s / tfl_ece / tfl_s / drl_s_ohne_sl / tfl_s_ohne_s (0: DRL disabled; 1: DRL_H via beam, halogen U.S. (without lights); 2: DRL_L via low beam; 3: DRL_S via separate TFLeuchte; U.S. Xenon (rings + bottom); 4: TFL_S via separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate TFLeuchte without taillight / tail lights, U.S.; 7: TFL_S_ohne_SL via separate TFLeuchte without tail light / rear light, ECE.)
2. Daytime Running Light (DRL) Brightness in % - FRM -> 3050 -> HELLIGKEIT_DRL -> wert_01 100% / Werte=64 set to wert_01 100% / wert_02 50% / wert_03 54% / wert_04 80% / wert_05 51% (NOT TESTED)
3. Day Driving Light Light settings (daytime) - Enables Day Light Driving as an option in your iDrive Lighting Option . It allows you to then tick/untick this option. Useful for countries where DRL is not mandatory - HU_CIC -> 3000 HMI -> DAYDRIVING_LIGHT -> standard / Werte=02 set to perm_off / Werte=00 or standard / Werte=02 or perm_on / Werte=01

Add to favorite F10/F11 – Windows can be rolled up with open door

Model: F10

1. FRM -> 3030 -> FH_TUER_AUF_STOP_MAUT -> Werte=3B set to aktiv / Werte=01 (Opening doors (FRONT) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it. May need to wait for iDrive to reset for activation)
2. JBBF -> 3070 -> FH_TUER_AUF_STOP_MAUT -> aktiv set to nicht_aktiv (Opening doors (REAR) will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it. May need to wait for iDrive to reset for activation)

Add to favorite F10/F11 – Tilt Passenger Mirror farther down when in reverse

Model: F10

1. FRM -> 3020 -> ASP_BORDSTEINAUTOMATIK_DELTA -> Werte=3B set to Werte=5A

Add to favorite F10/F11 – Play a different ringtone built in car

Model: F10

1. CMB_MEDIA -> 3001 TELEPHONE_PARAMETER -> RINGTONE -> ring_tone2 / Werte=01 set to See notes

Notes:

- ring_tone1 / Werte=00;
- ring_tone2 / Werte=01;
- ring_tone3 / Werte=02.

Add to favorite F10/F11 – Play telephone ringtone through the car speakers

Model: F10

1. CMB_MEDIA -> 3001 TELEPHONE_PARAMETER -> INBAND_RINGING -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Comfort Acces

Model: F10

1. Delay between front and rear windows - CAS -> 3003 FH_Master -> KMFRT_OEFF_HINTEN -> wert_01 / Werte=05 set to ????? (NOT TESTED)
2. Delay between the rear windows and SHD (Moon Roof) - CAS -> 3003 FH_Master -> KMFRT_OEFF_SHD -> wert_01 / Werte=23 set to ????? (NOT TESTED)
3. Delay between front and rear windows - CAS -> 3003 FH_Master -> KMFRT_SCHL_VORNE -> wert_01 / Werte=05 set to ????? (NOT TESTED - Presumed Delay on Close)
4. Delay between the front windows and SHD (Moon Roof) - CAS -> 3003 FH_Master -> KOMFORT_SCHL_SHD -> wert_01 / Werte=23 set to ????? (NOT TESTED - Presumed Delay on Close)

Add to favorite F10/F11 – Reduce Close Delay for side mirrors

Model: F10

1. Close Button Delay for side mirrors closing - CAS -> 3003 FH MASTER -> KMFRT_SCHLIESSEN -> wert_01 / Werte=0F set to wert_01 / Werte=00

Notes:

- 05 for 0,5sec;
- 0A for 1sec;
- 0F for 1,5sec.

Add to favorite F10/F11 – Close mirrors + windows + roof through Comfort Access

Model: F10

1. CAS -> 3003 FH MASTER -> KOMFORTSCHLIESSUNG_PA -> nicht_aktiv / Werte=00 set to aktiv / Werte=01 (Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv)
2. FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> nicht_aktiv / Werte=00 set to aktiv / Werte=01 (REQUIRED)

Add to favorite F10/F11 – Close mirrors + windows + roof through Key Fob

Model: F10

1. CAS -> 3003 FH MASTER -> KOMFORTSCHLIESSUNG_FB -> nicht_aktiv / Werte=00 set to aktiv / Werte=01 (Requires ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN set to aktiv)
2. FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> nicht_aktiv / Werte=00 set to aktiv / Werte=01 (REQUIRED)

Add to favorite F10/F11 – Key Access

Model: F10

1. Remote Key opens with a 4th button tailgate or rear window (active) - CAS -> 3002 CLM -> OPEN_RSCR_WITH_REMOTE_KEY_SPFN -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
2. Remote Key opens with 3rd button tailgate or rear window (active) - CAS -> 3002 CLM -> OPEN_RSCR_WITH_REMOTE_KEY_SPFN -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
3. Remote Key with 4th button (Special Function) activation - Enables Follow-Me-Home Lighting (Pathway Lighting) with short=press of Fob Button 4 (Panic Button) - CAS -> 3002 CLM -> REMOTE_KEY_SPECIAL_FCT -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
4. Can be the key 4 the FBD (OP_KEY_BUT_SPFN) used for the opening of the HK - CAS -> 3010 HKL_BEDIENUNG -> USE_FBD4 -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Unlock doors when engine is stopped

Model: F10

1. CAS -> 3002 CLM -> ER_KEYOUT_AUTOVR -> nicht_aktiv set to aktiv

Add to favorite F10/F11 – Turn off radio and navi when opening door

Model: F10

1. CAS -> 3000 TC -> TC_LOGIC_KLR_OFF_DOOR -> nicht_aktiv set to aktiv

Add to favorite F10/F11 – Auto start stop default; last setting on or off

Model: F10

1. Turn Auto Start/Stop OFF by default - CAS -> 3000 TC -> TC_MSA_DEFAULT_OFF -> nicht_aktiv / Werte=00 set to aktiv / Werte=01
2. Sets car's Auto Start/Stop function to start in the last used setting (e.g. Off) when the engine is started - CAS -> 3000 TC -> TC_MSA_MEMORY -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F10/F11 – Seatbelt Reminders & Warnings

Model: F10

1. Duration of the SBR (Seatbelt Reminder) warnings - ACSM -> 3001 -> GWF_SBR_WARNDAUER -> wert_01 / Werte=5A set to Werte = 01 (for 1 second) ((typically 90s) - 5A HEX = 90 Decimal)
2. Disable seat belt status display - passenger - ACSM -> 3000 Ausstattungsflags -> Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
3. Disable seat belt status display - driver - ACSM -> 3000 Ausstattungsflags -> Gurtzustandsanzeige_Fahrer_GWF_GZA_FA -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
4. Disable seat belt reminder - passenger - ACSM -> 3000 Ausstattungsflags -> SBR_BF_GWF_SBR_BF -> aktiv / Werte=01 set to nicht_aktiv / Werte=00 (Depend on Build Date)
5. Disable seat belt reminder - driver - ACSM -> 3000 Ausstattungsflags -> SBR_FA_GWF_SBR_FA -> aktiv / Werte=01 set to nicht_aktiv / Werte=00 (Depend on Build Date)
6. Disable sound on disconnect SB - passenger - ACSM -> 3000 Ausstattungsflags -> SPW_BF -> aktiv / Werte=01 set to nicht_aktiv / Werte=00 (Depend on Build Date)
7. Disable sound on disconnect SB - driver - ACSM -> 3000 Ausstattungsflags -> SPW_FA -> aktiv / Werte=01 set to nicht_aktiv / Werte=00 (Depend on Build Date)
8. Disable seat belt reminder - passenger - ACSM -> 3000 -> SBR_PreWarning_Beifahrer -> - set to nicht_aktiv (Depend on Build Date)
9. Disable seat belt reminder - driver - ACSM -> 3000 -> SBR_PreWarning_Fahrer -> - set to nicht_aktiv (Depend on Build Date)
10. Disable sound on disconnect SB - passenger - ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> - set to nicht_aktiv (Depend on Build Date)
11. Disable sound on disconnect SB - driver - ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> - set to nicht_aktiv (Depend on Build Date)

Add to favorite F22 – Activate Side Cameras at ANY Speed

Model: F22

1. TRSVC -> 3000 -> SV_Activate_Speed_Limit -> - set to Werte to: FF
2. TRSVC -> 3000 -> SV_Deactivate_Speed_Limit -> - set to Werte to: FF

Add to favorite F22 – Enable Rear-View Camera at all Speeds

Model: F22

1. REM -> 3009 -> D_SCHWELLE_2 -> - set to Werte to: FF
2. REM -> 3009 -> V_SCHWELLE_2 -> - set to Werte to: FF

Add to favorite F22 – Activate Rear Fog Lights feature for lighting switch

Model: F22

1. REM -> 3063 -> Mapping_Nebelschlussl_L_output -> - set to nsl_l
2. REM -> 3063 -> Mapping_Nebelschlussl_L_Function -> - set to nebelschlusslicht
3. REM -> 3063 -> Mapping_Nebelschlussl_R_output -> - set to nsl_l
4. REM -> 3063 -> Mapping_Nebelschlussl_R_Function -> - set to nebelschlusslicht

Add to favorite F22 – Turn On Tail Lights with DRLs

Model: F22

1. REM -> 3062 -> MAPPING_TAGFAHRL_H_L_OUTPUT -> - set to sl_l
2. REM -> 3062 -> MAPPING_TAGFAHRL_H_R_OUTPUT -> - set to sl_r
3. REM -> 3062 -> MAPPING_TAGAHRL_H2_L_OUTPUT -> - set to sl_2_l
4. REM -> 3062 -> MAPPING_TAGAHRL_H2_R_OUTPUT -> - set to sl_2_r

Add to favorite F22 – Disable HUD Startup Animation

Model: F22

1. KOMBI -> 3008 -> HUD_STARTUP_TIME -> - set to Werte to: 00

Add to favorite F22 – Enable GPS-Sync for Clock

Model: F22

1. KOMBI -> 3000 -> GPS_UHR -> - set to aktiv

Add to favorite F22 – Changes KOMBI startup to M/// Performance

Model: F22

1. KOMBI -> 3000 -> BMW_LOGO -> - set to mpm

Add to favorite F22 – Show Digital Speed in MPH in Cluster

Model: F22

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv

Add to favorite F22 – Always Remember Air ReCirculating

Model: F22

1. IHKA -> 3003 -> MEMORY_UMLUFT -> - set to aktiv

Add to favorite F22 – A/C System Remembers Last Setting

Model: F22

1. IHKA -> 3003 -> MEMORY_OFF -> - set to aktiv

Add to favorite F22 – Enable Developer Menu

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ENTWICKLER_MENUE -> - set to aktiv

Add to favorite F22 – Enable IPCE Web Enable WiFi Hot-Spot

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_COVERART -> - set to aktiv
2. HU_ENTRY/HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_VIDEO -> - set to aktiv
3. HU_ENTRY/HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP -> - set to aktiv
4. HU_ENTRY/HU_NBT -> 3003 -> WLAN_STATUS -> - set to aktiv
5. HU_ENTRY/HU_NBT -> 3003 -> WLAN_MODUS -> - set to ap
6. HU_ENTRY/HU_NBT -> 3003 -> WLAN_SIGNAL_STRENGTH -> - set to outdoor
7. HU_ENTRY/HU_NBT -> 3003 -> WLAN_CHANNEL -> - set to channel_1 -14

Notes:

Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this.

Add to favorite F22 – Enable IPCE Web Server @ 172.16.222.1

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> IPCE_WEBSERVER -> - set to aktiv

Add to favorite F22 – Add GPS Current Location to Navi Menu Items

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> NAVI_POSITION_MENU -> - set to aktiv

Add to favorite F22 – Enable Speech InputEnable Time-Stamp Display for Call Log

Model: F22

1. HU_ENTRY/HU_NBT -> 3003 -> TIMESTAMP_DISPLAY -> - set to aktiv

Add to favorite F22 – Enable Speech Input for E-Mail or SMS

Model: F22

1. HU_ENTRY/HU_NBT -> 3003 -> SPEECH_2_TEXT -> - set to aktiv

Add to favorite F22 – Disable Audible Chirp/Beep When Locking Car

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ACOUSTICAL_LOCK_CONFIRM -> - set to nicht_aktiv

Add to favorite F22 – Enable Full Text Lines in Office While Driving

Model: F22

1. HU_ENTRY/HU_NBT -> 3003 -> PIM_DRIVING_TEXT_LENGTH -> - set to whole text_07

Add to favorite F22 – Disable Office Function Speed Lock-Out

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> OFFICE_MESSAGES_SPEEDLOCK_CONDITION -> - set to nicht_aktiv

Add to favorite F22 – Enable the function of saving video files to NBT Hard Drive for play later

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ENT_MC_VIDEO_SUPPORT -> - set to aktiv

Add to favorite F22 – Add Weather Band Radio to sources

Model: F22

1. HU_ENTRY/HU_NBT -> 3002 -> RADIO_WEATHERBAND -> - set to aktiv 01

Add to favorite F22 – Display Tire Pressure & Temperaure in Vehicle Info

Model: F22

1. HU_ENTRY/HU_NBT -> 3001 -> RDC_SAFETY -> - set to aktiv 01

Add to favorite F22 – Remove Legal Disclaimers

Model: F22

1. HU_ENTRY/HU_NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> - set to kein_ld
2. HU_ENTRY/HU_NBT -> 3000 -> MACRO_CAM_LEGALDISCLAIMER -> - set to kein_ld

Add to favorite F22 – DVD-in-Motion activated

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MAX -> - set to werte = FF
2. HU_ENTRY/HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MIN -> - set to werte = FF
3. HU_ENTRY/HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> - set to nicht_aktiv
4. HU_ENTRY/HU_NBT -> 3000 -> VIDEO_FRONT_LOCKED -> - set to nicht_aktiv
5. HU_ENTRY/HU_NBT -> 3000 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none=00

Add to favorite F22 – Enable Video Files from USB

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ENT_CODEC_XVID -> - set to aktiv
2. HU_ENTRY/HU_NBT -> 3000 -> ENT_CODEC_XVCD -> - set to aktiv
3. HU_ENTRY/HU_NBT -> 3000 -> ENT_CODEC_OGG -> - set to aktiv

Add to favorite F22 – Navi Trip-Import

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> NAVI_TRIP_IMPORT -> - set to aktiv

Add to favorite F22 – Change Navi Voice to British English

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> LANGUAGE_ENGLISH_UK -> - set to master
2. HU_ENTRY/HU_NBT -> 3000 -> LANGUAGE_ENGLISH_US -> - set to nicht_aktiv

Add to favorite F22 – Turn Signals in HUD

Model: F22

1. Enable Turn Signals in HUD - HU_ENTRY/HU_NBT -> 3001 -> HUD_TURNSIGNAL -> - set to aktiv
2. Show Turn Signals in HUD [1/2] - KOMBI -> 3008 -> HUD_PIA_BLINKER -> - set to aktiv
3. Show Turn Signals in HUD [2/2] - KOMBI -> 3000 -> HUD_BLINKER_ENABLE -> - set to aktiv

Add to favorite F22 – Enable Active Sound Design Configuration Menu

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ASD_CONFIGURATION -> - set to aktiv
2. HU_ENTRY/HU_NBT -> 3000 -> ASD_SOUND_4 -> - set to aktiv

Add to favorite F22 – Disable Active Sound Design

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> ASD_SOUND_OFF -> - set to aktiv

Add to favorite F22 – Enable ///M LapTimer

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> M_LAPTIMER -> - set to aktiv

Add to favorite F22 – Disable Auto-Locking of Doors once begin driving

Model: F22

1. HU_ENTRY/HU_NBT -> 3000 -> DOOR_LOCK_AFTER_DRIVING_AWAY -> - set to nicht_aktiv

Add to favorite F22 – Set cell phone ringer as primary

Model: F22

1. HU_ENTRY/HU_NBT -> 3003 -> INBAND_RINGING -> - set to aktiv

Add to favorite F22 – Auto Light Sensitivity Increase

Model: F22

1. FEM_BODY -> 3130 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> - set to See notes
2. FEM_BODY -> 3130 -> RLS_FLC_SCHWELLWERT_SATZ -> - set to See notes

Notes:

normal = normal;
empfindlich = sensitive;
sehr_empfindlich = very sensitive;
unempfindlich = insensitive.

Add to favorite F22 – Disable Headlight Washers

Model: F22

1. FEM_BODY -> 3080 -> WW_SCHEINWERFERREININUNG -> - set to nicht_aktiv

Add to favorite F22 – Enable Illumination of Exterior Door Handle LEDs when in Reverse

Model: F22

1. FEM_BODY -> 3070 -> OVT_BEI_REUCKFAHRLICHT -> - set to aktiv

Add to favorite F22 – Tilt Passenger Mirror farther down when in reverse

Model: F22

1. FEM_BODY -> 3110 -> ASP_BORDSTEINAUTOMATIK_DELTA -> - set to werte=4B

Add to favorite F22 – Ambiance Lighting controlled independent from Dimmer Switch

Model: F22

1. FEM_BODY -> 3070 -> AMBIENTE_NACHFUEHRUNG -> - set to nicht_aktiv

Add to favorite F22 – Turn off Amber Side Markers next to Headlight

Model: F22

1. FEM_BODY -> 3063 -> MAPPING_SIDEMARKER_L_OUTPUT -> - set to OFF
2. FEM_BODY -> 3063 -> MAPPING_SIDEMARKER_R_OUTPUT -> - set to OFF

Add to favorite F22 – Turn on Fog Lights with Welcome Lights

Model: F22

1. FEM_BODY -> 3063 -> MAPPING_NEBELSCHW_L_PART_OF_WL -> - set to hard on
2. FEM_BODY -> 3063 -> MAPPING_NEBELSCHW_R_PART_OF_WL -> - set to hard on

Add to favorite F22 – Turn on Brake Force Flashing with Hard Braking

Model: F22

1. FEM_BODY -> 3060 -> ESS_AKTIVIERBARER_AUSGANG -> - set to bremsclicht blinkend

Add to favorite F22 – Change Triple-Blink Count to another Value

Model: F22

1. FEM_BODY -> 3060 -> BLINKZYKLEN_ANZAHL_TIPP -> - set to werte=X-1 (4 blinks = werte=3)

Add to favorite F22 – Turn off window roll-up door interrupt

Model: F22

1. FEM_BODY -> 3050 -> FH_TUERAUF_STOP_MAUT -> - set to nicht_aktiv

Add to favorite F22 – Unlock Door on Engine OFF (1 pull)

Model: F22

1. FEM_BODY -> 3040 -> CLM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK -> - set to aktiv

Add to favorite F22 – Auto Start/Stop Remember Last Setting

Model: F22

1. FEM_BODY -> 3023 -> TCM_MSA_MEMORY -> - set to aktiv

Add to favorite F22 – Auto Start/Stop Default OFF

Model: F22

1. FEM_BODY -> 3023 -> TCM_MSA_DEFAULT_OFF -> - set to aktiv

Add to favorite F22 – Turn off MMI when door is opened

Model: F22

1. FEM_BODY -> 3020 -> TCM_LOGIC_R_OFF_DOOR -> - set to aktiv

Add to favorite F22 – Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte)

Model: F22

1. FEM_BODY -> 3110 -> ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN -> - set to werte=14 (12Mph)

Add to favorite F22 – Close windows, sunroof & mirror from key fob

Model: F22

1. FEM_BODY -> 3053 -> KOMFORTSCHLIESSUNG_FB -> - set to aktiv
2. FEM_BODY -> 3053 -> KOMFORT_SCHLIESSEN (Immediate Fold on Lock) -> - set to Werte to: 00
3. FEM_BODY -> 3110 -> ASP_BEIKLAPPEN -> - set to aktiv
4. FEM_BODY -> 3110 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> - set to aktiv
5. FEM_BODY -> 3110 -> ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN -> - set to aktiv

Add to favorite F22 – Increase Angel Eyes Brightness to 100%

Model: F22

1. FEM_BODY -> 3062 -> MAPPING_STANDL_V_L_PWM_LEVEL_1 -> - set to 100%
2. FEM_BODY -> 3062 -> MAPPING_STANDL_V_R_PWM_LEVEL_1 -> - set to 100%
3. FEM_BODY -> 3062 -> MAPPING_PARKL_V_L_PWM_1_LEFT -> - set to 100%
4. FEM_BODY -> 3062 -> MAPPING_PARKL_V_L_PWM_2_RIGHT -> - set to 100%

Add to favorite F22 – Start Car by pushing button (hold brake not needed)

Model: F22

1. FEM_BODY -> 3020 -> TCM_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. FEM_BODY -> 3020 -> TCM_STARTLOCK_CLUTCH -> - set to nicht_aktiv
3. FEM_BODY -> 3020 -> TCM_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Notes:

New Procedures is as mentioned:
- press once for iDrive and fuel pump;
- press a second time and hold to crank engine.

Add to favorite F22 – Transfer Telephone Ringtone to car (Only for vehicles WITHOUT Navigation)

Model: F22

1. CMB_MEDIA -> 3001 -> INBAND_RINGING -> - set to aktiv

Add to favorite F22 – Disable Active Sound Design

Model: F22

1. ASD -> 3000 -> Model Range -> - set to F021

Add to favorite F22 – Re-Code for Enhanced Bluetooth

Model: F22

Notes:

1. Change FA (VO) to Remove 6NH & Add 6NS from VO

2. VO Code HU_NBT Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code HU_NBT Modules … or re-code if coding was already present

Add to favorite F22 – Turn Off Seat-Belt Reminder Chimes

Model: F22

1. Driver - ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> - set to nicht_aktiv
2. Passenger - ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> - set to nicht_aktiv

Add to favorite F22 – Disable Welcome 3 Gongs

Model: F22

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv

Add to favorite F36 – Activates ‘Easy Entry’ (Will stop moving forward if gear is engaged)

Model: F36

1. SM2 -> 3000 -> EINAUSSTIEGSHILFE -> - set to Modus_FA_SLV

Add to favorite F36 – Adds the vehicle’s current speed to the BC cycle list (Displays on KOMBI screen)

Model: F36

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv

Add to favorite F36 – Changes Navigation Voice from English to British English

Model: F36

1. [1/2] - HU_NBT2_EVO -> 3007 LANGUAGE, 32 -> LANGUAGE_ENGLISH_UK -> - set to master
2. [2/2] - HU_NBT2_EVO -> 3007 LANGUAGE, 32 -> LANGUAGE_ENGLISH_US -> - set to nicht_aktiv

Add to favorite F36 – Enables importing a trip into Navigation via USB Drive

Model: F36

1. HU_NBT2_EVO -> 3006 NAVIGATION, 64 -> NAVI_TRIP_IMPORT -> - set to aktiv

Add to favorite F36 – Disable house number first on destination input screen

Model: F36

1. HU_NBT2_EVO -> 3006 NAVI -> NAVI_DESTINATION_INPUT_US -> - set to nicht_aktiv

Add to favorite F36 – Adds Developer Menu to Settings. (Shows Build/Date/Versions/etc)

Model: F36

1. HU_NBT2_EVO -> 3006 NAVIGATION, 64 -> ENTWICKLER_MENUE -> - set to aktiv

Add to favorite F36 – Enable Video Playback via USB (.avi, .mp4, .mkv, .m4v, etc.)

Model: F36

1. HU_NBT2_EVO -> 3003 TELEPHON_TELEMATIK_ONLINE, 95 -> API_USB_VIDEO -> - set to both

Add to favorite F36 – Set volume level to be retained at 40% rather than startup on 25%

Model: F36

1. HU_NBT2_EVO -> 3002 AUDIO_TUNER_TRAFFIC, 96 -> VOL_MAX_ON -> - set to werte=28

Add to favorite F36 – Disable Legal Disclaimers

Model: F36

1. Removes iDrive Initial Disclaimer - HU_NBT2_EVO -> 3001 EXBOX, 96 -> LEGAL_DISCLAIMER_TIME -> - set to kein_ld
2. Removes disclaimer for all cameras and PDC - HU_NBT2_EVO -> 3001 EXBOX, 96 -> MACRO_CAM_LEGALDISCLAIMER -> - set to kein_ld

Add to favorite F36 – Removes speed requirement to watch videos

Model: F36

1. HU_NBT2_EVO -> 3000 HMI, 96 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none
2. HU_NBT2_EVO -> 3000 HMI, 96 -> VIDEO_HANDBRAKE -> - set to nicht_aktiv
3. HU_NBT2_EVO -> 3000 HMI, 96 -> VIDEO_FRONT_LOCKED -> - set to nicht_aktiv
4. HU_NBT2_EVO -> 3000 HMI, 96 -> SPEEDLOCK_X_KMH_MIN -> - set to Werte=FF
5. HU_NBT2_EVO -> 3000 HMI, 96 -> SPEEDLOCK_X_KMH_MAX -> - set to Werte=FF

Add to favorite F36 – Close/Open Rear Hatch from Fob & Kick Panel

Model: F36

1. HKFM -> 3010 -> TASTER_FBD -> - set to aktiv
2. HKFM -> 3010 -> SCH_TOEHKI -> - set to aktiv
3. HKFM -> 3010 -> SCH_FBD -> - set to aktiv

Add to favorite F36 – Changes the speed at which the side mirrors will auto-unfold

Model: F36

1. FEM_BODY -> 3110 -> ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN -> - set to 14 (20km/h) (Value in HEX)

Add to favorite F36 – Unfold Mirrors on vehicle unlock via Key Fob or Comfort Access

Model: F36

1. FEM_BODY -> 3110 -> ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN -> - set to aktiv

Add to favorite F36 – Fold Mirrors when holding lock on Key Fob or Comfort Access

Model: F36

1. FEM_BODY -> 3110 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> - set to aktiv

Add to favorite F36 – Activate Variable Light Distribution

Model: F36

1. FEM_BODY -> 3073 -> LUT_FLC_FORWARDLIGHTING_Y -> - set to werte = 9C,9C,9C (F20_mit_AFS)
2. FEM_BODY -> 3073 -> C_AFS_ENA -> - set to werte = 01 (ENABLE)

Add to favorite F36 – Door handle LEDs light up when engaged in Reverse

Model: F36

1. FEM_BODY -> 3070 -> OVT_BEI_RUECKFAHRLICHT -> - set to aktiv

Add to favorite F36 – Ambiance lighting controlled independent from Dimmer Switch

Model: F36

1. FEM_BODY -> 3070 -> AMBIENTE_NACHFUEHRUNG -> - set to nicht_aktiv

Add to favorite F36 – Activate Rear Fog Lamp Switch

Model: F36

1. [1/3] - FEM_BODY -> 3060 -> NSL_VERBAUT -> - set to NSL_VERBAUT
2. [2/3] - REM -> 3063 -> Mapping_Nebelschlussl_L_output -> - set to nsl_l
3. [3/3] - REM -> 3063 -> Mapping_Nebelschlussl_R_output -> - set to nsl_r

Add to favorite F36 – Close Windows/Fold Mirrors when holding lock on Key Fob

Model: F36

1. FEM_BODY -> 3060 -> BLINKZYKLEN_ANZAHL_TIPP -> - set to werte=X-1 (4 blinks = werte=3)

Add to favorite F36 – Close Windows/Fold Mirrors when holding lock on Key Fob

Model: F36

1. FEM_BODY -> 3053 -> KOMFORTSCHLIESSUNG_FB -> - set to aktiv

Add to favorite F36 – Change the Comfort Access trunk opening delay

Model: F36

1. FEM_BODY -> 3040 -> CLM_TIMEOUT_HK_SMO -> wert_02 set to werte = 03 (HEX value by 0.1 secs)

Add to favorite F36 – If Auto-Lock is enabled, then all doors will unlock at ignition shutoff

Model: F36

1. FEM_BODY -> 3040 -> CLM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK -> - set to aktiv

Add to favorite F36 – Disable initial 3 chime seatbelt warning

Model: F36

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv / Werte=00

Add to favorite F30/F32 – Stop flickering of custom led FOG LIGHTS

Model: F30

1. FEM_BODY -> 3061 -> NSW_L_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
2. FEM_BODY -> 3061 -> NSW_L_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
3. FEM_BODY -> 3061 -> NSW_L_KURZSCHLUSS -> aktiv set to nicht_aktiv
4. FEM_BODY -> 3061 -> NSW_L_IS_LED -> nicht_aktiv set to aktiv
5. FEM_BODY -> 3061 -> NSW_R_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
6. FEM_BODY -> 3061 -> NSW_R_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
7. FEM_BODY -> 3061 -> NSW_R_KURZSCHLUSS -> aktiv set to nicht_aktiv
8. FEM_BODY -> 3061 -> NSW_R_IS_LED -> nicht_aktiv set to aktiv

Add to favorite F30/F32 – Activate Rear Fog Lights

Model: F30

1. Activate Rear Fog Lights - FEM_BODY -> 3060 -> NSL_Verbaut -> - set to Verbaut
2. Activate Rear Fog Lights feature for lighting switch [1/4] - REM -> 3063 -> Mapping_Nebelschlussl_L_output -> - set to nsl_l
3. Activate Rear Fog Lights feature for lighting switch [2/4] - REM -> 3063 -> Mapping_Nebelschlussl_L_Function -> - set to nebelschlusslicht
4. Activate Rear Fog Lights feature for lighting switch [3/4] - REM -> 3063 -> Mapping_Nebelschlussl_R_output -> - set to nsl_l
5. Activate Rear Fog Lights feature for lighting switch [4/4] - REM -> 3063 -> Mapping_Nebelschlussl_R_Function -> - set to nebelschlusslicht

Add to favorite F30/F32 – Start Car by pushing button (hold brake not needed)

Model: F30

1. FEM_BODY -> 3020 -> TCM_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. FEM_BODY -> 3020 -> TCM_STARTLOCK_CLUTCH -> - set to nicht_aktiv
3. FEM_BODY -> 3020 -> TCM_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Notes:

New Procedures is as mentioned:
- press once for iDrive and fuel pump;
- press a second time and hold to crank engine.

Add to favorite F30/F32 – Headlamp Washers Configuration

Model: F30

1. Completely disables the Headlamp Washers - FEM_BODY -> 3080 -> WW_SCHEINWERFERREINIGUNG -> aktiv set to nicht_aktiv
2. Windshield wipe cycles after washing - FEM_BODY -> 3081 -> WW_ANZAHL_NACHWISCHZ_FRONT -> 3_mal_Nachwischen set to
3. Number of headlamp spray pulses - FEM_BODY -> 3080 -> WW_ANZAHL_SPRITZIMPULSE_SRA -> 2_Impulse set to 3_Impulse
4. Number of washes before headlamp wash reactivation - FEM_BODY -> 3080 -> WW_ANZAHL_WASCHBET_ZUR_SRA -> 10_Betaetigungen set to User Value
5. Changes how long it washes per pulse (Value in 100ms) - FEM_BODY -> 3080 -> WW_DAUER_SPRITZIMPULSE_SRA -> werte=0A (1000ms) set to User Value
6. Max Speed to activate Headlamp Washers - FEM_BODY -> 3080 -> WW_SRA_GESCHWINDIGKEITS_DEAKTIVIERUNG -> werte=82 (130km/h) set to User Value
7. Change the pause is between wash pulses (Value in 100ms) - FEM_BODY -> 3080 -> WW_PAUSE_SPRITZIMPULSE_SRA -> werte=0A (1000ms) set to User Value
8. Change the wait time is before reactivation (Value in 1min) - FEM_BODY -> 3080 -> WW_SRA_SPERRZEIT -> werte=0A (10min) set to User Value

Notes:

This will only work if you are equipped with Headlamp Washers, in the Cold Weather Package.
Most of these functions should work or change as labeled. However, I have yet to go through testing with these.

Add to favorite F30/F32 – Seat Heating Temperature Levels/Memory Seats

Model: F30

1. Heated Seat Temperature - Front Seats - Upper Body - Setting 1 Value (Default: 95° F) - FEM_BODY -> 3090 -> TEMP_LEHNE_STUFE_1_FRONT -> werte = 96 set to User Value
2. Heated Seat Temperature - Front Seats - Upper Body - Setting 2 Value (Default: 106° F) - FEM_BODY -> 3090 -> TEMP_LEHNE_STUFE_2_FRONT -> werte = A2 set to User Value
3. Heated Seat Temperature - Front Seats - Upper Body - Setting 3 Value (Default: 116° F) - FEM_BODY -> 3090 -> TEMP_LEHNE_STUFE_3_FRONT -> werte = AE set to User Value
4. Heated Seat Temperature - Front Seats - Lower Body - Setting 1 Value (Default: 94° F) - FEM_BODY -> 3090 -> TEMP_SITZ_STUFE_1_FRONT -> werte = 94 set to User Value
5. Heated Seat Temperature - Front Seats - Lower Body - Setting 2 Value (Default: 104° F) - FEM_BODY -> 3090 -> TEMP_SITZ_STUFE_2_FRONT -> werte = A0 set to User Value
6. Heated Seat Temperature - Front Seats - Lower Body - Setting 3 Value (Default: 114° F) - FEM_BODY -> 3090 -> TEMP_SITZ_STUFE_3_FRONT -> werte = AC set to User Value
7. Heated Seat Temperature - Rear Seats - Upper Body - Setting 1 Value (Default: 95° F) - FEM_BODY -> 3090 -> TEMP_LEHNE_STUFE_1_FOND -> werte = 96 set to User Value
8. Heated Seat Temperature - Rear Seats - Upper Body - Setting 2 Value (Default: 106° F) - FEM_BODY -> 3090 -> TEMP_LEHNE_STUFE_2_FOND -> werte = A2 set to User Value
9. Heated Seat Temperature - Rear Seats - Upper Body - Setting 3 Value (Default: 116° F) - FEM_BODY -> 3090 -> TEMP_LEHNE_STUFE_3_FOND -> werte = AE set to User Value
10. Heated Seat Temperature - Rear Seats - Lower Body - Setting 1 Value (Default: 94° F) - FEM_BODY -> 3090 -> TEMP_SITZ_STUFE_1_FOND -> werte = 94 set to User Value
11. Heated Seat Temperature - Rear Seats - Lower Body - Setting 2 Value (Default: 104° F) - FEM_BODY -> 3090 -> TEMP_SITZ_STUFE_2_FOND -> werte = A0 set to User Value
12. Heated Seat Temperature - Rear Seats - Lower Body - Setting 3 Value (Default: 114° F) - FEM_BODY -> 3090 -> TEMP_SITZ_STUFE_3_FOND -> werte = AC set to User Value
13. Activates ‘Easy Entry’ (Will stop moving forward if gear is engaged) - SM2 -> 3000 -> EINAUSSTIEGSHILFE -> nicht_aktiv set to Modus_FA_SLV
14. Vehicle will gong when Seat Memory has been successfully stored - SM2 -> 3000 -> MEMORY_GONG -> nicht_aktiv set to aktiv

Notes:

Cold Weather Package/Heated Front Seats Required. The values are all temperatures in HEX. The conversion: ([Desired Celsius Temperature] + 40)*2.
Ex. I want 106° F, and 106° F = 41° C. So my value will be (41+40)*2 = 162 (decimal) = A2 (HEX).

Add to favorite F34 – Active Spoiler (F34 3-Series GT only)

Model: F34

1. The speed of when the Active Spoiler is active. (Default: 110 km/h) - HKFM -> ????? -> V_ASP_OUT -> 00, 6E set to 00, (User Value)
2. The inverted speed of when the Active Spoiler is active - HKFM -> ????? -> INV_V_ASP_OUT -> FF, 91 set to FF, (User Value)

Notes:

The first value (00 or FF) is ignored. The second value is the modified value, being the desired speed. For example, 6E (HEX) = 110 (Decimal) = 110 km/h.
INV_V_ASP_OUT can be determined by taking the V_ASP_OUT value 6E (HEX) = 110 (Decimal). Then (255 - 110 = 145). Then 145 (Decimal) = 91 (HEX).
For those who can do HEX calculations: It’s (FF) minus (V_ASP_OUT Value). So FF - 6E =91.

Add to favorite F30/F32 – BMW Live Enabling

Model: F30

1. Enable BMW Live - Part 1 - HU_CIC -> 3000 -> CONNECTED_DRIVE -> nicht_aktiv set to aktiv
2. Enable BMW Live - Part 2 - HU_CIC -> 3000 -> ONLINE_BROWSER_LIVE -> nicht_aktiv set to aktiv
3. Enable BMW Live - Part 3 - HU_CIC -> 3003 -> ONLINE_BROWSER -> - set to nur_bmw_internet_aktiv
4. Enable BMW Live - Part 4 - HU_CIC -> 3003 -> ONLINE_SERVICES -> aktiv set to nicht_aktiv
5. Enable BMW Live - Part 5 - HU_CIC -> 3003 -> ONLINE_SERVICES_GLS -> aktiv set to nicht_aktiv
6. Enable BMW Live - Part 6 - HU_CIC -> 3003 -> DUN_PROFILE -> nicht_aktiv set to aktiv
7. Enable BMW Live - Part 7 - HU_CIC -> 3003 -> PAN_PROFILE -> nicht_aktiv set to aktiv
8. Enable BMW Live - Part 8 - HU_CIC -> 3003 -> BT_DATA_SERVICE -> nicht_aktiv set to aktiv

Notes:

Once BMW Live is enabled, you can't ether your phone data to your vehicle to use the in-vehicle internet browser and BMW Live Access. However, you will lose the ability to do Online Searches in Navigation and BMW Online Services. Not a recommended if your car includes BMW Online/Assist.

Add to favorite F30/F32 – Heads-Up Display

Model: F30

1. Displays the HWY Junction Images on HUD **Works if updated. Minor visual errors.** - HU_NBT -> 3000 -> JUNCTION_VIEW_HUD -> nicht_aktiv set to aktiv
2. Adds checkbox Heads Up Display Settings for "Entertainment/Telephone" - HU_CIC -> 3000 -> HUD_ENTERTAINMENTLIST -> nicht_aktiv set to aktiv
3. Shows Active Cruise Control iBrake Distance in HUD (Part 1) - HU_CIC -> 3000 -> HUD_DISTANCE_INFO -> nicht_aktiv set to aktiv
4. Shows Active Cruise Control iBrake Distance in HUD (Part 2) - KOMBI -> 3008 -> HUD_PIA_IBRAKE -> nicht_aktiv set to aktiv
5. Shows Active Cruise Control iBrake Distance in HUD (Part 3) - KOMBI -> 3000 -> IBRAKE_ABSTAND_ENABLE -> nicht_aktiv set to aktiv
6. Enable Entertainment Menu in HUD - KOMBI -> 3000 -> HUD_ENTERTAINMENT_ENABLE -> nicht_aktiv set to aktiv
7. Enables Telephone Recent Call List in HUD - KOMBI -> 3000 -> HUD_TELEFONANRUF_ENABLE -> nicht_aktiv set to aktiv
8. Displays Voice Command in HUD - KOMBI -> 3000 -> HUD_SPRACHEINGABE_ENABLE -> nicht_aktiv set to aktiv
9. Change HUD Startup Screen Time to be fast or slower. (Value in seconds) - KOMBI -> 3000 -> HUD_START_UP_SCREEN_ANZ_ZEIT -> 3 set to User Value

Notes:

Most of the Heads-Up Display functions are already active in the 2013+ F30/F32s.

Add to favorite F30/F32 – Advanced Real-Time Traffic Information Activation

Model: F30

1. Real-Time Traffic Info - Part 1 - HU_CIC -> 3000 -> NAVI_TRAFFIC_INFO_MAP -> nicht_aktiv set to aktiv
2. Real-Time Traffic Info - Part 2 - HU_CIC -> 3002 -> TI_CA_TMC -> nicht_aktiv set to aktiv
3. Real-Time Traffic Info - Part 3 - HU_CIC -> 3002 -> TI_VINFO -> nicht_aktiv set to aktiv
4. Real-Time Traffic Info - Part 4 - HU_CIC -> 3002 -> TI_TMC_REGIONAL -> nicht_aktiv set to aktiv
5. Real-Time Traffic Info - Part 5 - HU_CIC -> 3002 -> TI_FALLBACK_DISABLED -> nicht_aktiv set to aktiv

Notes:

To actively change routes based on Traffic, enable Traffic Info under Options in Navigation and enable Dynamic Guidance in Route Preferences.

Add to favorite F30/F32 – Video In Motion & Playback Features, Owner’s Manual in Motion and Camera in Motion

Model: F30

1. Disable DVD/USB Video Speedlock - Part 1 (HU_CIC and HU_NBT) - HU_CIC -> 3000 -> SPEEDLOCK_X_KMH_MAX -> werte = 03 set to werte = FF
2. Disable DVD/USB Video Speedlock - Part 2 (HU_CIC and HU_NBT) - HU_CIC -> 3000 -> SPEEDLOCK_X_KMH_MIN -> werte = 03 set to werte = FF
3. Removes ‘Park’ and handbrake requirement to watch Videos - Part 3 (HU_CIC only) - HU_CIC -> 3000 -> VIDEO_NUR_MIT_HANDBREMSE -> aktiv set to nicht_aktiv
4. Removes Front Lock (Needed with VIDEO_HANDBRAKE) - Part 4 (HU_NBT only) - HU_NBT -> 3000 -> VIDEO_FRONT_LOCKED -> aktiv set to nicht_aktiv
5. Removes requirement for handbrake to watch videos - Part 5 (HU_NBT only) - HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> aktiv set to nicht_aktiv
6. Removes speed requirement to watch videos - Part 6 (HU_NBT only) - HU_NBT -> 3000 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none
7. Removes speed requirement to read service messages - Part 7 (HU_NBT only) - HU_NBT -> 3000 -> SERVICES_MESSAGES_SPEEDLOCK_CONDITION -> - set to none
8. Removes speed requirement to read office messages - Part 8 (HU_NBT only) - HU_NBT -> 3000 -> OFFICE_MESSAGES_SPEEDLOCK_CONDITION -> - set to none
9. Enable Video Playback via USB (.avi, .mp4, .mkv, .m4v, etc.) - HU_NBT -> 3003 -> API_USB_VIDEO -> none set to both
10. Enable MC Video playback (Saving videos to internal HD does not work) - HU_NBT -> 3000 -> ENT_MC_VIDEO_SUPPORT -> nicht_aktiv set to aktiv
11. Enable XVID codec for USB videos - HU_NBT -> 3000 -> ENT_CODEC_XVID -> nicht_aktiv set to aktiv
12. Enable XVCD codec for USB videos - HU_NBT -> 3000 -> ENT_CODEC_XVCD -> nicht_aktiv set to aktiv
13. Enable OGG codec during video playback - HU_NBT -> 3000 -> ENT_CODEC_OGG -> nicht_aktiv set to aktiv
14. Enables the ‘DVD Menu’ button when watching a DVD - HU_NBT -> 3000 -> ENT_VIDEO_HMI -> nicht_aktiv set to aktiv
15. Owner’s Manual in Motion - Part 1 (Only tested with HU_NBT, not sure about HU_CIC) - HU_NBT -> 3000 -> SL06_IBA_1 -> aktiv set to nicht_aktiv
16. Owner’s Manual in Motion - Part 2 (Only tested with HU_NBT, not sure about HU_CIC) - HU_NBT -> 3000 -> SL07_IBA_2 -> aktiv set to nicht_aktiv
17. Owner’s Manual in Motion - Part 3 (Only tested with HU_NBT, not sure about HU_CIC) - HU_NBT -> 3000 -> SL21_IBA_3 -> aktiv set to nicht_aktiv
18. The speed when it auto disables top camera view (FF = 255 km/h) - REM/PMA -> ????? -> V_SCHWELLE_1 -> werte = 24 set to werte = FF
19. The speed when it auto disables rear camera view (FF = 255 km/h) - REM/PMA -> ????? -> V_SCHWELLE_2 -> werte = 0F set to werte = FF
20. The distance when it auto disables top camera view (FF = 255 meters) - ACSM -> ????? -> D_SCHWELLE_1 -> werte = 32 set to werte = FF
21. The distance when it auto disables rear camera view (FF = 255 meters) - REM/PMA -> ????? -> D_SCHWELLE_2 -> werte = 0A set to werte = FF
22. Activate Side View Camera at any speed - Part 1 - TRSVC -> 3000 -> SV_Activate_Speed_Limit -> werte = 0F set to werte = FF
23. Activate Side View Camera at any speed - Part 2 - TRSVC -> 3000 -> SV_Deactivate_Speed_Limit -> werte = 0F set to werte = FF

Notes:

Video in Motion is NOT available on HU_ENTRY. You must have HU_CIC or HU_NBT.
*USB Video playback should already be enabled in HU_NBT.

Add to favorite F30/F32 – iDrive Features

Model: F30

1. Plays ringtone streamed from cell phone (Works on iPhone, not Android) - CMB_MEDIA -> 3001 -> INBAND_RINGING (in HU_NBT) -> nicht_aktiv set to aktiv
2. Max amount of messages/addresses stored in vehicle, max 50 (HU_CIC only) - CMB_MEDIA -> 3008 -> MY_INFO_SUPPORTED_POIS -> wert_25 set to User Value
3. Enables Basic Voice Recognition - CMB_MEDIA -> 3000 -> SYS_EIN_AUS -> nicht_aktiv set to aktiv
4. Set the Ring Tone (if no Inband Ringing is set) - CMB_MEDIA -> 3001 -> RINGTONE -> ring_tone2 set to User Choice
5. Adds iDrive setting to turn on/off the audible confirmation when Alarm is armed - HU_CIC -> 3000 -> ACOUSTICAL_LOCK_CONFIRM -> nicht_aktiv set to aktiv
6. Removes L7 Logo from Tone (Sound) Menu - HU_CIC -> 3000 -> LOGIC7_SYMBOL -> aktiv set to nicht_aktiv
7. Add Tire Pressure and Individual Tire Temperature to the TPMS display - HU_CIC -> 3001 -> RDC_SAFETY -> nicht_aktiv set to aktiv
8. Adds Weatherband radio (NOAA in the US) to the Radio Sources - HU_CIC -> 3002 -> RADIO_WEATHERBAND -> nicht_aktiv set to aktiv
9. Adds Developer Menu to Settings. (Shows Build/Date/Versions/etc) - HU_CIC -> 3000 -> ENTWICKLER_MENUE -> nicht_aktiv set to aktiv
10. Changes DVD Region Code (WARNING: This will lock in after approx. 7 changes.) - HU_CIC -> 3001 -> AREA_CODE_DVD -> Country Value set to User Choice
11. Proposes a suggested Fuel Stop in a Route when it believe it will run out of gas - HU_CIC -> 3000 -> NAVI_FUELSTOP_PROPOSAL -> nicht_activ set to activ
12. Alternative to getting Office to show up (Unknown on HU_NBT) - HU_CIC -> 3000 -> PIM_Macro -> nicht_activ set to activ
13. Allows volume level to be retained up to 100% rather than startup on 25% - HU_CIC -> 3002 -> VOL_MAX_ON -> 19 set to 32
14. Displays an entire text (SMS) message on iDrive rather than three lines - HU_NBT -> 3003 -> PIM_Driving_Text -> up_to_three_lines set to Whole_text
15. iDrive Contacts separated from Phone contacts (Office only shows iDrive ones) - HU_NBT -> 3003 -> CONTACTS_NAVI_SEPARATED -> nicht_aktiv set to aktiv
16. Show volume level on screen when adjusting - HU_NBT -> 3000 -> VOLUME_POPUP_DISPLAY -> nicht_aktiv set to aktiv
17. Changes notification chime (gong) from BMW to BMW i, Mini, and Rolls Royce - HU_NBT -> 3002 -> SOUND_SIGNAL_SET -> 00_BMW set to 03_BMW_i
18. Changes HU_NBT Startup Screen between Animation, Splash Screen, or blank - HU_NBT -> 3001 -> STARTUP_TYPE -> animation set to black/splash
19. Change iDrive Startup Animation. (Selections below table) - HU_NBT -> 3001 -> STARTUP_EMBLEM -> variant_0 set to variant_01
20. Changes the Gauges in Sports Display from BMW Amber to Red & Silver - HU_NBT -> 3000 -> M_VEHICLE -> nicht_aktiv set to aktiv
21. Makes the route simulator available under new menu "Route preview” - Part 1 - HU_NBT -> 3000 -> ROUTE_FLIGHT -> nicht_aktiv set to aktiv
22. Makes the route simulator available under new menu "Route preview” - Part 2 - HU_NBT -> 3000 -> NAVI_SCROLLING_ALONG_ROUTE -> nicht_aktiv set to aktiv
23. Enables ‘Route Info’ (Turn-by-Turn list of route) - HU_NBT -> 3000 -> NAVI_ROAD_PREVIEW -> nicht_aktiv set to aktiv
24. Enables importing a trip into Navigation via USB Drive - HU_NBT -> 3001 -> NAVI_TRIP_IMPORT -> nicht_aktiv set to aktiv
25. Activates Siri Eyes-Free Button (Hold down voice recognition button) - HU_NBT -> 3003 -> CE_DEVICE_SPEECH_RECONGNITION -> nicht_aktiv set to aktiv
26. Option to allow watch next track on Basic Kombi with a retrofitted HU_NBT - HU_NBT -> 3000 -> BASIS_KOMBI_MMI_LIST -> nicht_aktiv set to aktiv
27. Changes Navigation Voice from English to British English - Part 1 - HU_NBT -> 3000 -> LANGUAGE_ENGLISH_UK -> nicht_aktiv set to master
28. Changes Navigation Voice from English to British English - Part 2 - HU_NBT -> 3000 -> LANGUAGE_ENGLISH_US -> master set to nicht_aktiv

Notes:

These are features that vary between all the iDrive functions (Vehicle Status, Navigation, Sound Settings, etc.) grouped by relativity.

**Note: CMB_MEDIA codes may or may not be under the HU_NBT module, since the combox is integrated in HU_NBT.

**Not all HU_CIC codes will work properly for HU_NBT and vice-versa, so if it’s not labeled for your equipped head unit, there is no guarantee it will work.

STARTUP EMBLEMS:
variant_0, variant_2, variant_6 - BMW Connected Drive;
variant_1 - ///M;
variant_3 - BMW i;
variant_4 - Mini;
variant_5 - Rolls Royce;
variant_7 - BMW White Startup;
variant_8 - BMW Brown Startup;
variant_9 - BMW Merry Christmas and Happy New Year.

Add to favorite F30/F32 – General Locking/Window Features & Convenience Features

Model: F30

1. If Auto-Lock is enabled, then all doors will unlock at ignition shutoff - FEM_BODY -> 3040 -> CLM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK -> nicht_aktiv set to aktiv
2. Allows the front windows to be rolled up while the door is opened - FEM_BODY -> 3050 -> FH_TUERAUF_STOP_MAUT -> aktiv set to nicht_aktiv
3. Allows the rear windows to be rolled up while the door is opened - REM -> 3050 -> FH_TUERAUF_STOP_MAUT -> aktiv set to nicht_aktiv
4. Delay time to activate Comfort Opening via Key Fob or CA. (HEX) - FEM_BODY -> 3053 -> KOMFORT_OEFFNEN -> werte = 0F set to werte = 0A
5. Comfort Opening: Delay between Front and Rear windows - FEM_BODY -> 3053 -> KOMFORT_OEFF_HINTEN -> werte = 05 set to User Value
6. Comfort Opening: Delay between the Rear windows and Moon Roof - FEM_BODY -> 3053 -> KOMFORT_OEFF_SHD -> werte = 23 set to User Value
7. Delay time to activate Convenience Closing via Key Fob or CA. (HEX) - FEM_BODY -> 3053 -> KOMFORT_SCHLIESSEN -> werte = 0F set to werte = 0A
8. Convenience Closing: Delay between Front and Rear windows - FEM_BODY -> 3053 -> KOMFORT_SCHL_VORNE -> werte = 05 set to User Value
9. Convenience Closing: Delay between the Front windows and Moon Roof - FEM_BODY -> 3053 -> KOMFORT_SCHL_SHD -> werte = 23 set to User Value
10. Open Windows/Fold Mirrors when holding Unlock on Key Fob - FEM_BODY -> 3053 -> KOMFORTOEFFNUNG_FB -> nicht aktiv set to aktiv
11. Close Windows/Fold Mirrors when holding lock on Key Fob - FEM_BODY -> 3053 -> KOMFORTSCHLIESSUNG_FB -> nicht aktiv set to aktiv
12. Unfold Mirrors on vehicle unlock via Key Fob or Comfort Access - FEM_BODY -> 3110 -> ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN -> nicht_aktiv set to aktiv
13. Fold Mirrors when holding lock on Key Fob or Comfort Access - FEM_BODY -> 3110 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> nicht_aktiv set to aktiv
14. Changes the speed at which the side mirrors will auto-unfold. (Value in HEX) - FEM_BODY -> 3110 -> ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN -> 28 (40km/h) set to 14 (20km/h)
15. Max speed the mirrors will fold. (Value in HEX) - FEM_BODY -> 3110 -> ASP_MAX_GESCHWINDIGKEIT_BEIKLAPPEN -> 14 (20km/h) set to FF (255km/h)
16. Time before it auto-locks the car when no doors have been opened. (10s units) - FEM_BODY -> 3040 -> CLM_TIME_PIA_LOCK_AT_TIMEOUT -> User Value set to 0C (120 s)
17. Number of turn signal flashes when unlocking - FEM_BODY -> 3060 -> QUITTBLK_ENTSCHAERFEN_ANZAHL -> werte=02 set to werte=X-1 (Value is Number of flashes - 1)
18. Number of turn signal flashes when locking - FEM_BODY -> 3060 -> QUITTBLK_SICHERN_ANZAHL -> werte=01 set to werte=X-1 (Value is Number of flashes - 1)
19. Turns off radio and navigation when the driver door is opened - FEM_BODY -> 3020 -> TCM_LOGIC_R_OFF_DOOR -> nicht_aktiv set to aktiv
20. Change the Comfort Access trunk opening delay - FEM_BODY -> 3040 -> CLM_TIMEOUT_HK_SMO -> wert_04 set to wert_01 (HEX value by 0.1 secs)
21. Turn off taillight flashing when opening trunk via Comfort Access - FEM_BODY -> 3040 -> CLM_SMO_INDICATOR -> aktiv set to nicht_aktiv
22. Button on key fob will be enabled to CLOSE the trunk - HKFM -> 3010 -> SCH_FBD -> nicht_aktiv set to aktiv
23. Button on driver-side will be enabled to CLOSE the trunk - HKFM -> 3010 -> SCH_FBD -> nicht_aktiv set to aktiv
24. Required for SCH_FBD and SCH_TOEHKI to work - HKFM -> 3010 -> TASTER_FBD -> nicht_aktiv set to aktiv
25. Air Conditioning will remember if ‘Off’ or ‘On’ from previous shutdown - IHKA -> 3002 -> MEMORY_OFF -> nicht_aktiv set to aktiv
26. Remember Air Re-Circulation Setting from previous shutdown - IHKA -> 3003 -> MEMORY_UMLUFT -> nicht_aktiv set to aktiv

Notes:

Opening/Closing via Comfort Access not included because it’s already enabled by default.
HKFM code are F31 (sports wagon). 20 minutes till active.
ASP_MAX_GESCHWINDIGKEIT_BEIKLAPPEN requires ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN to be same or higher value.
Some cars with MEMORY_OFF enabled may always have the A/C defaulted to Off at each startup. Car reaction may vary.

Add to favorite F30/F32 – Vehicle Drivetrain Features, Sport Features & Active Sound Design

Model: F30

1. Change Active Sound Design (Part 1) **See notes.** - ASD -> 3000 -> Model Range -> F030 set to See Notes
2. Change Active Sound Design (Part 2) **See notes.** - ASD -> 3000 -> Engine -> N26B20 set to See Notes
3. Enable Launch Control (Sport Auto Tranny Required [In VO Coding]) - EGS -> 3000 -> Applikation_LC / LC -> nicht_aktiv set to aktiv
4. Auto-Start-Stop set to ‘Off’ at every startup - FEM_BODY -> 3023 -> TCM_MSA_DEFAULT_OFF -> nicht_aktiv set to aktiv
5. Auto-Start-Stop remembers if set to ‘On’ or ‘Off’ from previous shutdown - FEM_BODY -> 3023 -> TCM_MSA_MEMORY -> nicht_aktiv set to aktiv
6. Enables Sports Displays on non-Navi iDrive. (Doesn't work for diesel) - HU_CIC -> 3000 -> EFF_DYN_SPORT_CID -> nicht_aktiv set to aktiv
7. Adds Sports Display units in the Language/Units settings menu - HU_CIC -> 3000 -> EFF_DYN_SPORT_UNIT -> nicht_aktiv set to aktiv
8. Configure sport mode in iDrive (Part 1) - HU_NBT -> 3000 -> Macro_fds -> popup_only set to popup_and_config
9. Configure sport mode in iDrive (Part 2) (Optional for HU_CIC) - ICM -> 3000 -> ICMKOD_B_SPORTINDIVIDUALISIERBAR -> aus (00) set to ein (01)
10. The initial following distance for Active Cruise Control is the closest distance - ICM -> 3000 -> C_Abstandsstufe_init -> Stufe_4 set to Stufe_1
11. The vehicle will start in drive mode Eco Pro every startup - ICM -> 3000 -> ICMKOD_B_InitEco -> nicht_verbaut set to verbaut
12. Enables Sport+ mode (Not Necessary with Sport Auto Tranny) - ICM -> 3000 -> ICMKOD_B_SPORTLENKUNG -> nicht_aktiv set to aktiv
13. Enables the Reverse Gear Gong (Chime) Noise for Japan. (Very Annoying) - KOMBI -> 3000 -> R_GANG_AKUSTIK_ENABLE -> nicht_aktiv set to aktiv

Notes:

Active Sound Design (ASD) is only available on 2014+F3x, all N20 engines and some N55 engines. If you see the ECU, you can modify it.
ASD Choices: F010 + S63B44 = M5/M6 Sound;
F080 + S55B30 = M3/M4 Sound;
F030 + N26B20 = 328i/428i Sound;
F020/F021 + S63B44 = ASD Off

Add to favorite F30/F32 – Safety Features & Precautions

Model: F30

1. Duration of the Seatbelt Reminder warnings (typically 90s) - ACSM -> 3001 -> GWF_SBR_WARNDAUER -> Werte=5A set to Werte = 01 (for 1 second)
2. Disable seat belt status display - passenger - ACSM -> 3000 -> Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
3. Disable seat belt status display - driver - ACSM -> 3000 -> Gurtzustandsanzeige_Fahrer_GWF_GZA_FA -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
4. Disable seat belt reminder - passenger - ACSM -> 3000 -> SBR_BF_GWF_SBR_BF -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
5. Disable seat belt reminder - driver - ACSM -> 3000 -> SBR_FA_GWF_SBR_FA -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
6. Disable seat belt reminder - passenger - ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
7. Disable seat belt reminder - driver - ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
8. Disable sound on disconnect SB - passenger - ACSM -> 3000 -> SBR_PreWarning_Beifahrer / SPW_BF -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
9. Disable sound on disconnect SB - driver - ACSM -> 3000 -> SBR_PreWarning_Fahrer / SPW_FA -> aktiv / Werte=01 set to nicht_aktiv / Werte=00
10. Disable initial 3 chime seatbelt warning - ACSM -> 3000 -> Initialwarnung_GWF_IW -> aktiv / Werte=01 set to nicht_aktiv / Werte=00

Notes:

Specific coding options for seatbelt chimes/reminders and safety disclaimers in iDrive.

Add to favorite F30/F32 – Change Active Blind Spot Activation Speed

Model: F30

1. ICM -> 3000 -> C_ZSW_Aktivierunggeschwindigkeit_Funktion_low -> 50_kmh set to 20_kmh

Notes:

Do not set below 20 km/h

Add to favorite F30/F32 – Enable Curb and Grass Detection for Lane Departure Warning System

Model: F30

1. KAFAS -> 3000 -> ROAD_EDGE_WARNING_ENABLED -> nicht_aktiv set to aktiv

Add to favorite F30/F32 – Disable Legal Disclaimers

Model: F30

1. Removes iDrive Initial Disclaimer - HU_CIC/NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> ld_mit_timeout set to kein_ld
2. Removes disclaimer for all cameras and PDC - HU_CIC/NBT -> 3001 -> MACRO_CAM_LEGALDISCLAIMER -> ld_mit_timeout set to kein_ld

Add to favorite F30/F32 – Trip Computer auto-reset time

Model: F30

1. KOMBI -> BC_AUTORESET_ZEIT -> 3000 -> 4h (werte = 04) set to User Choice (Value in HEX for hours (00 = 0 hours, FF = Never))

Add to favorite F30/F32 – Adds the vehicle’s current speed to the BC cycle list (Displays on KOMBI screen)

Model: F30

1. KOMBI -> BC_DIGITAL_V -> 3000 -> nicht_aktiv set to aktiv

Add to favorite F30/F32 – Turns off speed correction and displays actual speed

Model: F30

1. KOMBI -> 3000 -> BC_V_KORREKTUR -> aktiv set to nicht_aktiv

Notes:

When testing Speed Correction turned off, it causes the speed to always be approximately 2 mph lower than Cruise Control set speed. Also, it’s recommended not to set clock via GPS if equipped with BMW Online. 6WA Cluster is the Extended Instrument Cluster

Add to favorite F30/F32 – Changes KOMBI/HUD startup to M/// Performance (Shows M550d on updated cars)

Model: F30

1. KOMBI -> 3000 -> BMW_LOGO -> ag set to mpm

Add to favorite F30/F32 – Sets the clock via GPS signal (Needs the clock to be within 2 min. of the GPS time)

Model: F30

1. KOMBI -> 3000 -> GPS_UHR (Intended for HU_CIC cars) -> nicht_aktiv set to aktiv

Add to favorite F30/F32 – Enables/Disables the “Auto Start-Stop Off” notification in KOMBI

Model: F30

1. KOMBI -> 3000 -> MSA_VERFUEGBARANZEIGE_ENABLE -> aktiv set to nicht_aktiv

Add to favorite F30/F32 – Changes orange night colors of KOMBI to be white at night (No Navi Night Switch too)

Model: F30

1. KOMBI -> 3007 -> DIM_NACHT_EIN -> werte = 32 set to werte = FF

Add to favorite F30/F32 – Enables Image of Sport+ on KOMBI

Model: F30

1. KOMBI -> 3000 -> FDS_MENUE_TEXT_1/2/3/4 -> menue_4 set to menue_3
2. KOMBI -> 3000 -> FDS_MENUE_SIGNAL_1/2/3/4 -> menue_4 set to menue_3

Add to favorite F30/F32 – Enables LIM Function (Cruise Control ‘Set’ button acts as ‘LIM’ button)

Model: F30

1. [1/4] - KOMBI -> 3003 -> SLD_ENABLE -> nicht_aktiv set to aktiv
2. [2/4] - ICM -> 3000 -> SLD_Funktion -> nicht_aktiv set to aktiv
3. [3/4] - ICM -> 3000 -> C_Umschaltung_ACC_DCC -> unterdruecken set to zugelassen
4. [4/4] - ICM -> 3000 -> LDM_SET_Taste -> SET_und_aktivieren__IO set to nur_SET__O

Add to favorite F30/F32 – LED Replacement Turn Signal Bulbs Activation

Model: F30

1. Turns off Front-Left Turn Signal Bulb Cold Monitoring - FEM_BODY -> 3061 -> FRA_V_L_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
2. Turns off Front-Left Turn Signal Bulb Warm Monitoring - FEM_BODY -> 3061 -> FRA_V_L_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
3. Enables Front-Left LED bulb - FEM_BODY -> 3061 -> FRA_V_L_IS_LED -> nicht_aktiv set to aktiv
4. Turns off Front-Right Turn Signal Bulb Cold Monitoring - FEM_BODY -> 3061 -> FRA_V_R_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
5. Turns off Front-Right Turn Signal Bulb Warm Monitoring - FEM_BODY -> 3061 -> FRA_V_R_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
6. Enables Front-Right LED bulb - FEM_BODY -> 3061 -> FRA_V_R_IS_LED -> nicht_aktiv set to aktiv
7. Turns off Rear-Left Turn Signal Bulb Cold Monitoring - FEM_BODY/REM -> 3061 -> FRA_H_L_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
8. Turns off Rear-Left Turn Signal Bulb Warm Monitoring - FEM_BODY/REM -> 3061 -> FRA_H_L_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
9. Enables Rear-Left LED bulb **May cause Check Engine Light** - FEM_BODY/REM -> 3061 -> FRA_H_L_IS_LED -> nicht_aktiv set to aktiv
10. Turns off Rear-Right Turn Signal Bulb Cold Monitoring - FEM_BODY/REM -> 3061 -> FRA_H_R_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
11. Turns off Rear-Right Turn Signal Bulb Warm Monitoring - FEM_BODY/REM -> 3061 -> FRA_H_R_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
12. Enables Rear-Right LED bulb **May cause Check Engine Light** - FEM_BODY/REM -> 3061 -> FRA_H_R_IS_LED -> nicht_aktiv set to aktiv

Notes:

With traditional turn signal bulbs, the F30 needs to check if the bulb is still alive and working every 4 minutes the vehicle is on, resulting in a very small pulse being sent to the light bulb, not enough to illuminate but enough to verify the bulb is present and working. With LED bulbs, this causes an actual flicker. These codes below remove the pulse monitoring and enables LED bulb recognition.
Recommended bulb: CREE 30W XB-D5 LED

Add to favorite F30/F32 – Assorted Lighting Features

Model: F30

1. FEM_BODY -> 3130 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> “Normal” set to See notes (Reduce the Automatic headlamp sensitivity. (see notes))
2. FEM_BODY -> 3060 -> BLINKZYKLEN_ANZAHL_TIPP -> werte = 02 set to werte = X-1 (Change the triple blinker blinks to any amount. (Value is XX + 1))
3. FEM_BODY -> 3060 -> ESS_AKTIVIERBARER_AUSGANG -> flachenvergroesserun set to bremslicht_blinkend (Change Emergency brake light from Inner Brake Lights to Flashing Lights)
4. FEM_BODY -> 3060 -> ESS_AKTIVIERUNG_GESCHW -> werte=02 (5 km/h) set to User Value (Threshold Speed for Activating Emergency brake light)
5. FEM_BODY -> 3063 -> MAPPING_SIDEMARKER_L_OUTPUT -> fra_v_l set to off (Turns off the left front side-marker. (The blinker is still active))
6. FEM_BODY -> 3063 -> MAPPING_SIDEMARKER_R_OUTPUT -> fra_v_r set to off (Turns off the right front side-marker. (The blinker is still active))
7. FEM_BODY -> 3070 -> OVT_BEI_RUECKFAHRLICHT -> nicht_aktiv set to aktiv (Door handle LEDs light up when engaged in Reverse)
8. FEM_BODY -> 3050 -> NSW_AUS_BEI_FL -> aktiv set to nicht_aktiv (Allows Fog Lights to remain on when high beams are active.)
9. FEM_BODY -> 3060 -> NSW_EIN_AUF_LDS_STL -> nicht_aktiv set to aktiv (Allows Fog Lights to turn on while only parking lights are on.)
10. FEM_BODY -> 3070 -> Ambiente_Helligkeit -> 64 set to User Value (Brightness of Interior Ambient Lighting (Value is in HEX))
11. FEM_BODY -> 3070 -> Ambiente_Nachfuehrung -> aktiv set to nicht aktiv (Separates Ambient Light Level and Instrument Cluster Light Level)
12. FEM_BODY -> 3070 -> IB_Einschalt_begr_lok -> 8 set to User Value (The time the interior lights stay illuminated while locking (Value in HEX))
13. FEM_BODY -> 3070 -> IB_Einschalt_begr_ulok -> 8 set to User Value (The time the interior lights stay illuminated while unlocking (Value in HEX))
14. FEM_BODY -> 3070 -> WL_HELLIGKEIT -> 64 set to User Value (Brightness of Welcome Lights)

Notes:

**Door handle illumination in Reverse is already active on vehicles equipped with Top-View Camera.

*Translation for Auto Headlamp code: empfindlich (sensitive); sehr_empfindlich (very sensitive); unempfindlich (insensitive); Tagfahrlicht (DRL).

Add to favorite F30/F32 – Fog lights illuminate in the steered direction

Model: F30

1. Shows Day-Running Lights option in iDrive Settings, in Lighting - HU_NBT -> 3000 -> Daydriving_light -> standard set to aktiv
2. Enables Day-Running Lights - FEM_BODY -> 3060 -> TFL_MODUS -> Off set to Tfl_s (0, A) or Drl_s (0, A, P) (Letters: 0: Off, A: Auto, P: Parking)
3. Turns On Left Tail-light (Inner Part) on with DRL - REM -> 3062 -> MAPPING_TAGFAHRL_H2_L_OUTPUT -> off set to sl_2_l
4. Turns On Right Tail-light (Inner Part) on with DRL - REM -> 3062 -> MAPPING_TAGFAHRL_H2_R_OUTPUT -> off set to sl_2_r
5. Turns On Left Tail-light (Outer Part) on with DRL - REM -> 3062 -> MAPPING_TAGFAHRL_H_L_OUTPUT -> off set to sl_l
6. Turns On Right Tail-light (Outer Part) on with DRL - REM -> 3062 -> MAPPING_TAGFAHRL_H_R_OUTPUT -> off set to sl_r
7. Activate Rear Fog Lamp Switch - Part 1/5 - FEM_BODY -> 3060 -> NSL_Verbaut -> Nicht Verbaut set to Verbaut
8. Activate Rear-Left Fog Lamp - Part 2/5 - REM -> 3063 -> Mapping_Nebelschlussl_L_output -> off set to nsl_l
9. Activate Rear-Left Fog Lamp - Part 3/5 - REM -> 3063 -> Mapping_Nebelschlussl_L_Function -> nebelschlusslicht set to nebelschlusslicht
10. Activate Rear-Right Fog Lamp - Part 4/5 - REM -> 3063 -> Mapping_Nebelschlussl_R_output -> off set to nsl_r
11. Activate Rear-Right Fog Lamp - Part 5/5 - REM -> 3063 -> Mapping_Nebelschlussl_R_Function -> nebelschlusslicht set to nebelschlusslicht

Notes:

Rear Fog Lights require a working Rear Fog Light Button, which can be done by using the plastic piece in place of the button and breaking the plastic stopper inside the piece. No parts need to be bought.

Add to favorite F30/F32 – Cornering Lights (Fog Lamps) & Fog Lamp Welcome Lights

Model: F30

1. Enables cornering lights - Part 1 - FEM_BODY -> 3073 -> C_CLC_ENA -> F030disable set to F030enable
2. Enables cornering lights - Part 2 - FEM_BODY -> 3073 -> C_BLC_ENA -> nicht_aktiv set to aktiv
3. Enables cornering lights - Part 3 - FEM_BODY -> 3073 -> KL_ENABLE_LI -> KL_Aus set to KL_Ein
4. Enables cornering lights - Part 4 - FEM_BODY -> 3073 -> KL_ENABLE_RE -> KL_Aus set to KL_Ein
5. Enables cornering lights - Part 5 - FEM_BODY -> 3073 -> MAPPING_abbiegel_L_output -> Off set to nsw_l
6. Enables cornering lights - Part 6 - FEM_BODY -> 3073 -> MAPPING_abbiegel_R_output -> Off set to nsw_r
7. Turns on Left Fog Lamp with Welcome Lights - FEM_BODY -> 3073 -> MAPPING_NEBELSCHW_L_PART_OF_WL -> nicht_aktiv set to Soft_On
8. Turns on Right Fog Lamp with Welcome Lights - FEM_BODY -> 3073 -> MAPPING_NEBELSCHW_R_PART_OF_WL -> nicht_aktiv set to Soft_On

Notes:

Fog lights illuminate in the steered direction.

Add to favorite F30/F32 – Angel LED Brightness (Xenon Headlamps or LED Headlamps required)

Model: F30

1. Change Parking Light Brightness (Left) - FEM_BODY -> 3062 -> MAPPING_PARKL_V_L_PWM_LEVEL_1 -> 32 set to 8
2. Change Parking Light Brightness (Right) - FEM_BODY -> 3062 -> MAPPING_PARKL_V_R_PWM_LEVEL_1 -> 32 set to 8
3. Change Angel Eye Brightness when headlamps on (Left) - FEM_BODY -> 3062 -> MAPPING_STANDL_V_L_PWM_LEVEL_1 -> 32 set to 8
4. Change Angel Eye Brightness when headlamps on (Right) - FEM_BODY -> 3062 -> MAPPING_STANDL_V_R_PWM_LEVEL_1 -> 32 set to 8
5. Change Day-Run Light Brightness (Left) - FEM_BODY -> 3062 -> MAPPING_TAGFAHRL_V_L_PWM_LEVEL_1 -> 32 set to 64
6. Change Day-Run Light Brightness (Right) - FEM_BODY -> 3062 -> MAPPING_TAGFAHRL_V_R_PWM_LEVEL_1 -> 32 set to 64

Notes:

These adjust the brightness of the Angel LEDs. The values are in Hex. (Ex. 0% = 00, 25% = 19, 50% = 32, 100% = 64). Supposedly doesn’t work on F32.

Add to favorite F22 – Re-Code for Sports Automatic Transmission

Model: F22

Notes:

1. MODIFY THE READ FA - Change 205 to 2TB from the vehicle FA.
2. VO CODE - EGS, ICM and KOMBI.

Add to favorite F30/F32 – Activate iDrive Office

Model: F30

Notes:

iDrive Office is sometimes disabled based on Country Controllers. This will enable you to have access to the Office Menu which will be located on the main iDrive menu. (This offers Contacts, Email reading, Text Message Receiving, etc.)

1. MODIFY THE READ FA - Remove Country Controller code (SL8Ax) from the vehicle FA.
2. VO CODE - CMB_MEDIA and HU_CIC/HU_ENTRY or HU_NBT.

Add to favorite F30/F32 – Activate Enhanced Bluetooth

Model: F30

Notes:

Enhanced Bluetooth requires the vehicle to be equipped with HU_NBT or have a combox if you have HU_CIC or HU_ENTRY. This enables you to stream audio via Bluetooth, enable artwork, and USB stream music as well. If 6NH doesn’t exist, add either 6NK of 6NS.

1. MODIFY THE READ FA - Change 6NH to 6NK (w/o BMW Assist) or 6NS (w/ BMW Assist) from the vehicle FA.
2. VO CODE - CMB_MEDIA and HU_CIC/HU_ENTRY or HU_NBT.

Add to favorite F30/F32 – Activate Variable Light Distribution

Model: F30

Notes:

Activate Variable Light Distribution requires a FLA/KAFAS camera to be installed in the vehicle. This allows the light beam to adapt according to vehicle speed. When driving in the city, a low beam is used to beber illuminate the road immediately ahead without dazzling oncoming drivers. Then at higher speeds, the headlamps are raised to increase visibility.

1. MODIFY THE READ FA - Remove 8S4 from the vehicle FA.
2. VO CODE - FEM_BODY.

Add to favorite F30/F32 – Activate Active High Beam Assistant (Anti-Dazzle)

Model: F30

Notes:

Activate Active High Beam Assistant (Anti-Dazzle) requires the vehicle to be equipped with High Beam Assistant. This enabled the system to enable high beams to dodge vehicles by independently moving the high beams around in each headlight without blinding other drivers.

1. MODIFY THE READ FA - Remove 5AP from the vehicle FA.
2. VO CODE - FEM_BODY and FLA/KAFAS2 (whichever you are equipped with).

The CAFD modifications of HBA functionality after VO coding in FEM_BODY and FLA/KAFAS2:
1. The Speed HBA Enables - FEM_BODY -> C_HBA_ENA_V_HI (Value in HEX for speed kph)
2. The Speed HBA Disables - FEM_BODY -> C_HBA_ENA_V_LO (Value in HEX for speed kph)
3. The Speed to immediately enter Highway Mode - FEM_BODY -> C_HBA_HGWY_V_HI (Default: Werte= 8C) [Hex 8C = Decimal 140 = 140 kph]
4. The Speed to leave Highway Mode - FEM_BODY -> C_HBA_HGWY_V_LO (Default: Werte=5A) [Hex 5A = Decimal 90 = 90 kph]

It is recommended, if not, possibly required to enable Variable Light Distribution in order to have Activate Active High Beam Assistant become fully active. See the cheat sheet for enabling Variable Light Distribution.

Add to favorite F48 – Enable Rear-View Camera at all Speeds

Model: F48

1. PMA_PDC -> 300B -> D_SCHWELLE_1_KMH -> - set to Werte = FF
2. PMA_PDC -> 300B -> D_SCHWELLE_2_KMH -> - set to Werte = FF
3. PMA_PDC -> 300B -> V_SCHWELLE_1_KMH -> - set to Werte = FF
4. PMA_PDC -> 300B -> V_SCHWELLE_2_KMH -> - set to Werte = FF

Add to favorite F48 – Enable GPS-Sync for Clock

Model: F48

1. KOMBI -> 3000 -> GPS_UHR -> - set to aktiv

Add to favorite F48 – Show Digital Speed in MPH in Cluster

Model: F48

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv

Add to favorite F48 – Enable Curb and Grass Detection for Lane Departure Warning System

Model: F48

1. KAFAS2 -> 3020 -> ROAD_EDGE_WARNING_ENABLED -> - set to werte=02

Add to favorite F48 – Always Remember Air ReCirculating

Model: F48

1. IHKA -> 3000 -> MEMORY_UMLUFT -> - set to aktiv

Add to favorite F48 – A/C System Remembers Last Setting

Model: F48

1. IHKA -> 3000 -> OFF_MEMORY -> - set to aktiv

Add to favorite F48 – Enable Developer Menu

Model: F48

1. HU_NBT -> 3000 -> ENTWICKLER_MENUE -> - set to aktiv

Add to favorite F48 – Enable WiFi Hot-Spot

Model: F48

1. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_COVERART -> - set to aktiv
2. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_VIDEO -> - set to aktiv
3. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP -> - set to aktiv
4. HU_NBT -> 3003 -> WLAN_STATUS -> - set to aktiv
5. HU_NBT -> 3003 -> WLAN_MODUS -> - set to ap
6. HU_NBT -> 3003 -> WLAN_SIGNAL_STRENGTH -> - set to outdoor

Notes:

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)

Add to favorite F48 – Enable IPCE Web Server @ 172.16.222.1

Model: F48

1. HU_NBT -> 3000 -> IPCE_WEBSERVER -> - set to aktiv

Add to favorite F48 – Change i-Drive Animation to ///M Logo

Model: F48

1. HU_NBT -> 3001 -> STARTUP_EMBLEM -> - set to variant_01

Add to favorite F48 – Disable Legal Disclaimers

Model: F48

1. HU_NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> - set to kein_ld
2. HU_NBT -> 3001 -> MACRO_CAM_LEGALDISCLAIMER -> - set to kein_ld
3. HU_NBT -> 3001 -> MACRO_NVICAM_LDISCLAIMER -> - set to kein_ld

Add to favorite F48 – Add Temperature & PSI to tire monitor screen

Model: F48

1. HU_NBT -> 3001 -> RDC_SAFETY -> - set to aktiv

Add to favorite F48 – Enable Time-Stamp Display for Call Log

Model: F48

1. HU_NBT -> 3003 -> TIMESTAMP_DISPLAY -> - set to aktiv

Add to favorite F48 – Enable Speech Input for E-Mail or SMS

Model: F48

1. HU_NBT -> 3003 -> SPEECH_2_TEXT -> - set to aktiv

Add to favorite F48 – Disable Audible Chirp/Beep When Locking Car

Model: F48

1. HU_NBT -> 3000 -> ACOUSTICAL_LOCK_CONFIRM -> - set to nicht_aktiv

Add to favorite F48 – Enable Full Text Lines in Office While Driving

Model: F48

1. HU_NBT -> 3003 -> PIM_DRIVING_TEXT_LENGTH -> - set to whole text_07

Add to favorite F48 – Disable Office Function Speed Lock-Out

Model: F48

1. HU_NBT -> 3000 -> OFFICE_MESSAGES_SPEEDLOCK_CONDITION -> - set to nicht_aktiv

Add to favorite F48 – Enable the function of saving video files to NBT Hard Drive for play later

Model: F48

1. HU_NBT -> 3000 -> ENT_MC_VIDEO_SUPPORT -> - set to aktiv

Add to favorite F48 – Add GPS Current Location to Navi Menu Items

Model: F48

1. HU_NBT -> 3000 -> NAVI_POSITION_MENU -> - set to aktiv

Add to favorite F48 – Enable Video Files from USB

Model: F85

1. HU_NBT -> 3000 -> ENT_CODEC_OGG -> - set to aktiv
2. HU_NBT -> 3000 -> ENT_CODEC_XVID -> - set to aktiv
3. HU_NBT -> 3000 -> ENT_CODEC_XVCD -> - set to aktiv
4. HU_NBT -> 3003 -> API_USB_VIDEO -> - set to both

Add to favorite F48 – Navi Fuel-Stop Proposal Along Route

Model: F85

1. HU_NBT -> 3000 -> NAVI_FUELSTOP_PROPOSAL -> - set to aktiv

Add to favorite F48 – Navi Trip-Import

Model: F48

1. HU_NBT -> 3000 -> NAVI_TRIP_IMPORT -> - set to aktiv

Add to favorite F48 – Video-in-Motion activated

Model: F48

1. HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MAX -> - set to werte = FF
2. HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MIN -> - set to werte = FF
3. HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> - set to nicht_aktiv
4. HU_NBT -> 3000 -> VIDEO_FRONT_LOCKED -> - set to nicht_aktiv
5. HU_NBT -> 3000 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none=00

Add to favorite F48 – Change Navi Voice to British English

Model: F48

1. HU_NBT -> 3000 -> LANGUAGE_ENGLISH_UK -> - set to master
2. HU_NBT -> 3000 -> LANGUAGE_ENGLISH_US -> - set to nicht_aktiv

Add to favorite F48 – Enable Sports Displays

Model: F48

1. HU_NBT -> 3000 -> EFF_DYN_SPORT_CID -> - set to aktiv
2. HU_NBT -> 3000 -> EFF_DYN_SPORT_UNIT -> - set to aktiv
3. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> DREHMOMENT -> - set to lb_ft (displays ft lb)
4. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> LEISTUNG -> - set to ps (displays hp)

Add to favorite F48 – Disable Auto-Locking of Doors once begin driving

Model: F48

1. HU_NBT -> 3000 -> DOOR_LOCK_AFTER_DRIVING_AWAY -> - set to nicht_aktiv

Add to favorite F48 – Enable Siri Voice Control

Model: F48

1. HU_NBT -> 3003 -> CE_DEVICE_SPEECH_RECOGNITION -> - set to aktiv

Add to favorite F48 – Set cell phone ringer as primary

Model: F48

1. HU_NBT -> 3001 -> INBAND_RINGING -> - set to aktiv

Add to favorite F48 – Close/Open Rear Hatch from Fob & Kick Panel

Model: F48

1. HKFM_LS -> 3010 -> TASTER_FBD -> - set to aktiv – werte=01
2. HKFM_LS -> 3010 -> SCH_TOEHKI -> - set to aktiv – werte=01
3. HKFM_LS -> 3010 -> SCH_FBD -> - set to aktiv – werte=01

Notes:

*** May take up to 30 minutes to begin working after coding ***

Add to favorite F48 – Activate Rear Fog Lights feature for lighting switch

Model: F48

1. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_L_output -> - set to nsw_l
2. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_L_Function -> - set to nebelscheinwerfer
3. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_R_output -> - set to nsw_l
4. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_R_Function -> - set to nebelscheinwerfer
5. BDC_BODY -> 3063 -> NSL_Verbaut -> - set to Verbaut

Add to favorite F48 – Turn On Tail Lights with DRLs

Model: F48

1. BDC_BODY -> 3063 -> MAPPING_TAGFAHRL_1_V_L_OUTPUT -> - set to tfl_l
2. BDC_BODY -> 3063 -> MAPPING_TAGFAHRL_1_V_R_OUTPUT -> - set to tfl_r
3. BDC_BODY -> 3063 -> MAPPING_TAGAHRL_2_V_L_OUTPUT -> - set to werte=04
4. BDC_BODY -> 3063 -> MAPPING_TAGAHRL_2_V_R_OUTPUT -> - set to werte=04

Add to favorite F48 – Auto Light Sensitivity Increase

Model: F48

1. BDC_BODY -> 3080 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> - set to see notes
2. BDC_BODY -> 3130 -> RLS_FLC_SCHWELLWERT_SATZ -> - set to see notes

Notes:

normal = normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Add to favorite F48 – Disable Headlight Washers

Model: F48

1. BDC_BODY -> 3080 -> WW_SCHEINWERFERREININUNG -> - set to nicht_aktiv

Add to favorite F48 – Activate Rear Fog Lights (In conjunction with REM Module coding)

Model: F48

1. BDC_BODY -> 3068 -> NSL_Verbaut -> - set to Verbaut

Add to favorite F48 – Turn on Fog Lights with Welcome Lights

Model: F48

1. BDC_BODY -> 3063 -> MAPPING_NEBELSCHW_L_PART_OF_WL -> - set to werte=01
2. BDC_BODY -> 3063 -> MAPPING_NEBELSCHW_R_PART_OF_WL -> - set to werte=01

Add to favorite F48 – Enable Illumination of Exterior Door Handle LEDs when in Reverse

Model: F48

1. BDC_BODY -> 3070 -> OVT_BEI_REUCKFAHRLICHT -> - set to aktiv

Add to favorite F48 – Turn off Amber Side Markers next to Headlight

Model: F48

1. BDC_BODY -> 3068 -> MAPPING_SIDEMARKER_L_OUTPUT -> - set to OFF
2. BDC_BODY -> 3068 -> MAPPING_SIDEMARKER_R_OUTPUT -> - set to OFF

Add to favorite F48 – Turn on Brake Force Flashing with Hard Braking

Model: F48

1. BDC_BODY -> 3068 -> ESS_AKTIVIERBARER_AUSGANG -> - set to bremsclicht blinkend

Add to favorite F48 – Change Triple-Blink Count to another Value

Model: F48

1. BDC_BODY -> 3068 -> BLINKZYKLEN_ANZAHL_TIPP -> - set to werte = # blinks-1 (4 blinks = werte=3)

Add to favorite F48 – Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte)

Model: F48

1. BDC_BODY -> 3110 -> ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN -> - set to werte=14 (12Mph)

Add to favorite F48 – Increase Angel Eyes Brightness to 100%

Model: F48

1. BDC_BODY -> ????? -> MAPPING_STANDL_V_L_PWM_LEVEL_1 -> - set to 100%
2. BDC_BODY -> ????? -> MAPPING_STANDL_V_R_PWM_LEVEL_1 -> - set to 100%
3. BDC_BODY -> ????? -> MAPPING_PARKL_V_L_PWM_1_LEFT -> - set to 100%
4. BDC_BODY -> ????? -> MAPPING_PARKL_V_L_PWM_2_RIGHT -> - set to 100%

Add to favorite F48 – Ambiance Lighting controlled independent from Dimmer Switch

Model: F48

1. BDC_BODY -> 3070 -> AMBIENTE_NACHFUEHRUNG -> - set to nickt_aktiv

Add to favorite F48 – Fog Lights stay on w/ High Beams

Model: F48

1. BDC_BODY -> 3068 -> NSW_AUS_BEI_FL -> - set to nicht_aktiv

Add to favorite F48 – Opening REAR doors won’t interrupt windows

Model: F48

1. BDC_BODY -> 3051 -> FH_TUERAUF_STOP_MAUT_REAR -> - set to nickt_aktiv

Add to favorite F48 – Opening FRONT doors won’t interrupt windows

Model: F48

1. BDC_BODY -> 3050 -> FH_TUERAUF_STOP_MAUT -> - set to nickt_aktiv

Add to favorite F48 – Tilt Passenger Mirror farther down when in reverse

Model: F48

1. BDC_BODY -> 3110 -> ASP_BORDSTEINAUTOMATIK_DELTA -> - set to werte=4B

Add to favorite F48 – Start Car by pushing button (hold brake not needed)

Model: F48

1. BDC_BODY -> 3020 -> TCM_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. BDC_BODY -> 3020 -> TCM_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Add to favorite F48 – Set Mirror Fold Delay Time to Instant upon locking

Model: F48

1. BDC_BODY -> 3056 -> KOMFORT_SCHLIESSEN -> - set to werte=00

Add to favorite F48 – Close Mirrors/Windows/SunRoof from FOB or CA

Model: F48

1. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG_FB -> - set to aktiv
2. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG_PA -> - set to aktiv
3. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN -> - set to aktiv
4. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> - set to aktiv
5. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN_NACH_KOMFORTSCHLIESSEN -> - set to aktiv

Add to favorite F48 – Electronics off when door opened

Model: F48

1. BDC_BODY -> 3020 -> TCM_LOGIC_R_OFF_DOOR -> - set to aktiv

Add to favorite F48 – Unlock all doors with engine off (Single-Pull Handles)

Model: F48

1. BDC_BODY -> 3040 -> VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK -> - set to aktiv

Add to favorite F48 – Auto Start/Stop – Remember LAST Setting

Model: F48

1. BDC_BODY -> 3023 -> TCM_MSA_MEMORY -> - set to aktiv

Add to favorite F48 – Auto Start/Stop OFF by default

Model: F48

1. BDC_BODY -> 3023 -> TC_MSA_DEFAULT_OFF -> - set to aktiv – werte=01

Add to favorite F48 – SeatBelt Reminders/Sound OFF

Model: F48

1. ACSM -> 3000 -> SBR_PreWarning_Fahrer -> - set to nicht_aktiv
2. ACSM -> 3000 -> SBR_PreWarning_Beifahrer -> - set to nicht_aktiv
3. ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> - set to nicht_aktiv
4. ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> - set to nicht_aktiv

Add to favorite F48 – Disable Welcome 3 Gongs

Model: F48

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv

Add to favorite F48 – SeatBelt Reminder Lights OFF

Model: F48

1. ACSM -> 3000 -> Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF -> - set to nicht_aktiv – werte=00
2. ACSM -> 3000 -> Gurtzustandsanzeige_Fahrer_GFW_GZA_FA -> - set to nicht_aktiv – werte=00

Add to favorite F48 – Re-Code for Enhanced Bluetooth

Model: F48

Notes:

1. Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

2. VO Code HU_NBT:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code HU_NBT Module … or re-code if coding was already present

Add to favorite F01 – Enable Paddle Shifters (for Retrofits)

Model: F01

1. SZL -> 3000 -> Lenkrad_Schaltpaddles -> - set to aktiv

Add to favorite F25 – Enable Rear-View Camera at all Speeds

Model: F25

1. PDC -> 3009 -> D_SCHWELLE_2 -> - set to Werte = FF
2. PDC -> 3009 -> V_SCHWELLE_2 -> - set to Werte = FF

Add to favorite F01 – Enable Side-View Cameras at all Speeds

Model: F01

1. TRSVC -> 3000 -> SV_Activate_Speed_Limit -> - set to Werte=FF
2. TRSVC -> 3000 -> SV_Deactivate_Speed -> - set to Werte=FF

Add to favorite F01 – Enable Rear-View Camera at all Speeds

Model: F01

1. PDC -> 3009 -> D_SCHWELLE_2 -> - set to Werte = FF
2. PDC -> 3009 -> V_SCHWELLE_2 -> - set to Werte = FF

Add to favorite F01 – Enable HUD for Entertainment & Phone List

Model: F01

1. KOMBI -> 3000 -> HUD_ENTERTAINMENT_ENABLE -> - set to aktiv
2. KOMBI -> 3000 -> HUD_TELEFONANRUF_ENABLE -> - set to aktiv
3. KOMBI -> 3000 -> HUD_TELEFONBUCH_ENABLE -> - set to aktiv
4. KOMBI -> 3000 -> HUD_ENTERTAINMENTLIST -> - set to aktiv

Notes:

*** Adds checkbox under settings for HUD – Displayed Information Menu ***

Add to favorite F01 – Enable GPS-Sync for Clock

Model: F01

1. KOMBI -> 3000 -> GPS_UHR -> - set to aktiv

Add to favorite F01 – Show Digital Speed in MPH in Cluster

Model: F01

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv-werte=01

Add to favorite F01 – Auto Light Sensitivity Increase

Model: F01

1. JBBF -> 3530 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> - set to see notes
2. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ -> - set to see notes

Notes:

normal = normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Add to favorite F01 – Auto Wiper Sensitivity Increase

Model: F01

1. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_1 -> - set to werte=05
2. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_2 -> - set to werte=09
3. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_3 -> - set to werte=0D

Add to favorite F01 – Disable Headlight Washers

Model: F01

1. JBBF -> 3000 -> SCHEINWERFERREINIGUNG -> - set to nicht_aktiv

Add to favorite F01 – Opening REAR doors won’t interrupt windows

Model: F01

1. JBBF -> 3070 -> FH_TUER_AUF_STOP_MAUT -> - set to nickt_aktiv – werte=00

Add to favorite F01 – Always Remember Air ReCirculating

Model: F01

1. IHKA -> 3000 -> MEMORY_UMLUFT -> - set to aktiv

Add to favorite F01 – A/C System Remembers Last Setting

Model: F01

1. IHKA -> 3000 -> OFF_MEMORY -> - set to aktiv-werte=01

Add to favorite F01 – Enable Developer Menu

Model: F01

1. HU_NBT -> 3000 -> ENTWICKLER_MENUE -> - set to aktiv 01

Add to favorite F01 – Enable WiFi Hot-Spot

Model: F01

1. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_COVERART -> - set to aktiv
2. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_VIDEO -> - set to aktiv
3. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP -> - set to aktiv
4. HU_NBT -> 3003 -> WLAN_STATUS -> - set to aktiv
5. HU_NBT -> 3003 -> WLAN_MODUS -> - set to ap
6. HU_NBT -> 3003 -> WLAN_SIGNAL_STRENGTH -> - set to outdoor

Notes:

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)

Add to favorite F01 – Enable IPCE Web Server @ 172.16.222.1

Model: F01

1. HU_NBT -> 3000 -> IPCE_WEBSERVER -> - set to aktiv

Add to favorite F01 – Change i-Drive Animation to ///M Logo

Model: F01

1. HU_NBT -> 3001 -> STARTUP_EMBLEM -> - set to variant_01

Add to favorite F01 – Disable Legal Disclaimers

Model: F01

1. HU_NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> - set to kein_ld
2. HU_NBT -> 3001 -> MACRO_CAM_LEGALDISCLAIMER -> - set to kein_ld
3. HU_NBT -> 3001 -> MACRO_NVICAM_LDISCLAIMER -> - set to kein_ld

Add to favorite F01 – Add Temperature & PSI to tire monitor screen

Model: F01

1. HU_NBT -> 3001 -> RDC_SAFETY -> - set to aktiv

Add to favorite F01 – Enable Time-Stamp Display for Call Log

Model: F01

1. HU_NBT -> 3003 -> TIMESTAMP_DISPLAY -> - set to aktiv

Add to favorite F01 – Enable Speech Input for E-Mail or SMS

Model: F01

1. HU_NBT -> 3003 -> SPEECH_2_TEXT -> - set to aktiv

Add to favorite F01 – Disable Audible Chirp/Beep When Locking Car

Model: F01

1. HU_NBT -> 3000 -> ACOUSTICAL_LOCK_CONFIRM -> - set to nicht_aktiv

Add to favorite F01/F10/F11 – Enable Full Text Lines in Office While Driving

Model: F01

1. HU_NBT -> 3003 -> PIM_DRIVING_TEXT_LENGTH -> - set to whole text_07

Add to favorite F01/F10/F11 – Disable Office Function Speed Lock-Out

Model: F01

1. HU_NBT -> 3000 -> OFFICE_MESSAGES_SPEEDLOCK_CONDITION -> - set to nicht_aktiv

Add to favorite F01/F10/F11 – Enable the function of saving video files to NBT Hard Drive for play later

Model: F01

1. HU_NBT -> 3000 -> ENT_MC_VIDEO_SUPPORT -> - set to aktiv

Add to favorite F01 – Add Weather Band Radio (CIC Only)

Model: F01

1. HU_CIC -> 3002 -> RADIO_WEATHERBAND -> - set to aktiv

Add to favorite F01 – Turn Signals in HUD

Model: F01

1. Enable Turn Signals in HUD - HU_NBT -> 3001 -> HUD_TURNSIGNAL -> - set to aktiv
2. Add Turn-Signals to HUD - HU_NBT -> 3000 -> HUD_TURNSIGNAL -> - set to aktiv
3. Show Turn Signals in HUD - KOMBI -> 3008 -> HUD_PIA_BLINKER -> - set to aktiv
4. Show Turn Signals in HUD - KOMBI -> 3000 -> BLINKER_HUD_ENABLE -> - set to aktiv

Add to favorite F01 – Add GPS Current Location to Navi Menu Items

Model: F01

1. HU_NBT -> 3000 -> NAVI_POSITION_MENU -> - set to aktiv

Add to favorite F01/F10/F11 – Enable Video Files from USB

Model: F01

1. HU_CIC/NBT -> 3000 -> ENT_CODEC_XVID -> - set to aktiv
2. HU_CIC/NBT -> 3000 -> ENT_CODEC_XVCD -> - set to aktiv
3. HU_CIC/NBT -> 3003 -> API_USB_VIDEO -> - set to both

Add to favorite F01 – Navi Fuel-Stop Proposal Along Route

Model: F01

1. HU_NBT -> 3000 -> NAVI_FUELSTOP_PROPOSAL -> - set to aktiv

Add to favorite F01 – Navi Trip-Import

Model: F01

1. HU_NBT -> 3000 -> NAVI_TRIP_IMPORT -> - set to aktiv

Add to favorite F01/F10/F11 – Change Navi Voice to British English

Model: F01

1. HU_CIC -> 3000 -> VOICE_LANGUAGE_RR_US -> - set to aktiv
2. HU_NBT -> 3000 -> LANGUAGE_ENGLISH_UK -> - set to master
3. HU_NBT -> 3000 -> LANGUAGE_ENGLISH_US -> - set to nicht_aktiv

Add to favorite F01 – DVD-in-Motion activated

Model: F01

1. HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MAX -> - set to werte = FF
2. HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MIN -> - set to werte = FF
3. HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> - set to nicht_aktiv
4. HU_NBT -> 3000 -> VIDEO_FRONT_LOCKED -> - set to nicht_aktiv
5. HU_NBT -> 3000 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none=00

Add to favorite F01/F10/F11 – Enable Volume On-Screen Display

Model: F01

1. HU_CIC/NBT -> 3002 -> VOLUME_POPUP_DISPLAY -> - set to aktiv

Add to favorite F01 – Enable Sports Displays

Model: F01

1. HU_NBT -> 3000 -> EFF_DYN_SPORT_CID -> - set to aktiv
2. HU_NBT -> 3000 -> EFF_DYN_SPORT_UNIT -> - set to aktiv
3. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> DREHMOMENT -> - set to lb_ft (displays ft lb)
4. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> LEISTUNG -> - set to ps (displays hp)

Add to favorite F01 – Enable ///M LapTimer

Model: F01

1. HU_NBT -> 3000 -> M_LAPTIMER -> - set to aktiv

Add to favorite F01 – Disable Auto-Locking of Doors once begin driving

Model: F01

1. HU_NBT -> 3000 -> DOOR_LOCK_AFTER_DRIVING_AWAY -> - set to nicht_aktiv

Add to favorite F01 – Enable Siri Voice Control

Model: F01

1. HU_NBT -> 3003 -> CE_DEVICE_SPEECH_RECOGNITION -> - set to aktiv

Add to favorite F01 – Set cell phone ringer as primary

Model: F01

1. HU_NBT -> 3001 -> INBAND_RINGING -> - set to aktiv

Add to favorite F01 – Close/Open Trunk from Fob & Kick Panel

Model: F01

1. HKFM_LS -> 3010 -> SCH_FBD -> - set to aktiv – werte=01
2. HKFM_LS -> 3010 -> SCH_TOEHKI -> - set to aktiv – werte=01
3. HKFM_LS -> 3010 -> TASTER_FBD -> - set to aktiv – werte=01

Notes:

*** takes up to 30 minutes to begin working after coding ***

Add to favorite F01 – Welcome Lights – Add Lights to Welcome Lights

Model: F01

1. Low Beam - FRM -> 3050 -> WL_FUNKTION_AL -> - set to nicht_aktiv – werte=00
2. High Beam - FRM -> 3050 -> WL_FUNKTION_FL -> - set to nicht_aktiv – werte=00
3. License Plate - FRM -> 3050 -> WL_FUNKTION_KZL -> - set to hard_on – werte = 02
4. Fog Lights - FRM -> 3050 -> WL_FUNKTION_NSW -> - set to hard_on – werte = 02
5. Tail Lights - FRM -> 3050 -> WL_FUNKTION_SSL -> - set to hard_on – werte = 02

Add to favorite F01/F10/F11 – High-Beam Assistant – Auto-On

Model: F01

1. FRM -> 3050 -> FLA_AUTO_AKTIV -> - set to automatisch – werte=01
2. FRM -> 3050 -> FLA_VERBAUT -> - set to aktiv
3. KAFAS2 -> 3050 -> FLA_ON_OFF -> - set to aktiv – werte=01
4. HU_NBT -> 3000 -> HIGH_BEAM_ASSISTANT -> - set to aktiv

Add to favorite F01/F10/F11 – Brake-Force Flashing on Hard Braking

Model: F01

1. FRM -> 3050 -> ESS_ERSCHEINUNGSBILD -> - set to bremslicht blinkend – werte=02
2. FRM -> 3050 -> ESS_ON_VERZ -> - set to US – werte=0A
3. FRM -> 3050 -> ESS_GESCHW_SCHWELLE -> - set to US – werte=05

Add to favorite F01 – Ambiance Lighting Brightness Settings

Model: F01

1. FRM -> -> CS_AMB_BRIGHTNESS -> 64 (seeing as the below setting is a HEX value, thus I assume this setting is also in HEX, which makes this 100) set to ????? (Ambient brightness Upper limit for the ambient brightness)
2. FRM -> -> CS_AMB_MIN_BRIGHTNESS -> 0A (In decimal this is 10) set to ????? (Min Amb brightness Lower limit of the ambient brightness)
3. FRM -> -> CS_AMB_MAX_OFFSET -> 30 set to ????? (Max amb brightness offset Brightness for PWM output as a percentage physical value of 20% ... 80%)

Add to favorite F01 – Fog Lights stay on w/ High Beams

Model: F01

1. FRM -> 3050 -> NSW_AUS_BEI_FL -> - set to nicht_aktiv – werte=00

Add to favorite F01 – Rear Tails & Angel Eyes on as DRL

Model: F01

1. FRM -> 3050 -> DRL_MODUS -> - set to drl_s – werte=03

Add to favorite F01 – Opening FRONT doors won’t interrupt windows

Model: F01

1. FRM -> 3030 -> FH_TUER_AUF_STOP_MAUT -> - set to nickt_aktiv – werte=00

Add to favorite F01 – Tilt Passenger Mirror farther down when in reverse

Model: F01

1. FRM -> 3020 -> ASP_BORDSTEINAUTOMATIK_DELTA -> - set to werte=4B

Add to favorite F01 – Angel-Eyes Full Brightness (with headights on)

Model: F01

1. FRM -> 3060 -> U_EFF_POL -> - set to wert_05__13,0V

Add to favorite F01 – Start Car by pushing button (hold brake not needed)

Model: F01

1. CAS -> 3000 -> TC_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. CAS -> 3000 -> TC_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Add to favorite F01 – Set Mirror Fold Delay Time

Model: F01

1. CAS -> 3003 -> KMFRT_SCHLIESSEN -> - set to werte=00

Add to favorite F01 – Close Mirrors/Windows/SunRoof from FOB or CA

Model: F01

1. CAS -> 3003 -> KOMFORTSCHLIESSUNG_FB -> - set to aktiv – werte=00
2. CAS -> 3003 -> KOMFORTSCHLIESSUNG_PA -> - set to aktiv – werte=00
3. FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> - set to aktiv – werte=01

Add to favorite F01 – Electronics off when door opened

Model: F01

1. CAS -> 3000 -> TC_LOGIC_KLR_OFF_DOOR -> - set to aktiv

Add to favorite F01 – Unlock all doors with engine off (Single-Pull Handles)

Model: F01

1. CAS -> 3002 -> ER-KEYOUT_AUTOVR -> - set to aktiv – werte=01

Add to favorite F01 – Auto Start/Stop – Remember LAST Setting

Model: F01

1. CAS -> 3000 -> TC_MSA_MEMORY -> - set to aktiv – werte=01

Add to favorite F01 – Auto Start/Stop OFF by default

Model: F01

1. CAS -> 3000 -> TC_MSA_DEFAULT_OFF -> - set to aktiv – werte=01

Add to favorite F01 – SeatBelt Reminders/Sound OFF

Model: F01

1. ACSM -> 3000 -> SBR_PreWarning_Fahrer -> - set to nicht_aktiv – werte=00
2. ACSM -> 3000 -> SBR_PreWarning_Beifahrer -> - set to nicht_aktiv – werte=00
3. ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> - set to nicht_aktiv – werte=00
4. ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> - set to nicht_aktiv – werte=00

Add to favorite F01 – Disable Welcome 3 Gongs

Model: F01

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv

Add to favorite F01 – SeatBelt Reminder Lights OFF

Model: F01

1. ACSM -> 3000 -> Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF -> - set to nicht_aktiv – werte=00
2. ACSM -> 3000 -> Gurtzustandsanzeige_Fahrer_GFW_GZA_FA -> - set to nicht_aktiv – werte=00

Add to favorite F01 – Re-Code for Enhanced Bluetooth

Model: F01

Notes:

1. Change FA (VO) to Remove 6NH from VO & Add 6NS to VO

2. VO Code HU_NBT:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code HU_NBT Module … or re-code if coding was already present

Add to favorite F01 – Re-Code for Dazzle Headlights (LED Adaptive Headlights like EU-Spec)

Model: F01

Notes:

1. Change FA (VO) to Remove 5AP & 8S4 from VO

2. VO Code FRM Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

3. VO Code KAFAS2 Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code FRM or KAFAS2 Modules … or re-code if coding was already present

Add to favorite F25 – Enable Side-View Cameras at all Speeds

Model: F25

1. TRSVC -> 3000 -> SV_Activate_Speed_Limit -> - set to Werte=FF
2. TRSVC -> 3000 -> SV_Deactivate_Speed -> - set to Werte=FF

Add to favorite F25 – Enable HUD for Entertainment & Phone List

Model: F25

1. KOMBI -> 3000 -> HUD_ENTERTAINMENT_ENABLE -> - set to aktiv
2. KOMBI -> 3000 -> HUD_TELEFONANRUF_ENABLE -> - set to aktiv
3. KOMBI -> 3000 -> HUD_TELEFONBUCH_ENABLE -> - set to aktiv
4. KOMBI -> 3000 -> HUD_ENTERTAINMENTLIST -> - set to aktiv

Notes:

*** Adds checkbox under settings for HUD – Displayed Information Menu ***

Add to favorite F25 – Enable GPS-Sync for Clock

Model: F25

1. KOMBI -> 3000 -> GPS_UHR -> - set to aktiv

Add to favorite F25 – Show Digital Speed in MPH in Cluster

Model: F25

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv

Add to favorite F25 – Auto Light Sensitivity Increase

Model: F25

1. JBBF -> 3530 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> - set to see notes
2. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ -> - set to see notes

Notes:

normal = normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Add to favorite F25 – Auto Wiper Sensitivity Increase

Model: F25

1. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_1 -> - set to werte=05
2. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_2 -> - set to werte=09
3. JBBF -> 3530 -> RLS_FLC_SCHWELLWERT_SATZ_3 -> - set to werte=0D

Add to favorite F25 – Disable Headlight Washers

Model: F25

1. JBBF -> 3000 -> SCHEINWERFERREINIGUNG -> - set to nicht_aktiv

Add to favorite F25 – Opening REAR doors won’t interrupt windows

Model: F25

1. JBBF -> 3070 -> FH_TUER_AUF_STOP_MAUT -> - set to nickt_aktiv – werte=00

Add to favorite F25 – Always Remember Air ReCirculating

Model: F25

1. IHKA -> 3000 -> UMLUFT_MEMORY -> - set to aktiv

Add to favorite F25 – A/C System Remembers Last Setting

Model: F25

1. IHKA -> 3000 -> OFF_MEMORY -> - set to aktiv-werte=01

Add to favorite F25 – Enable Developer Menu

Model: F25

1. HU_NBT -> 3000 -> ENTWICKLER_MENUE -> - set to aktiv 01

Add to favorite F25 – Change i-Drive Animation to ///M Logo

Model: F25

1. HU_NBT -> 3001 -> STARTUP_EMBLEM -> - set to variant_01

Add to favorite F25 – Remove Legal Disclaimers

Model: F25

1. HU_NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> - set to kein_ld
2. HU_NBT -> 3001 -> MACRO_CAM_LEGALDISCLAIMER -> - set to kein_ld

Add to favorite F25 – Add Temperature & PSI to tire monitor screen

Model: F25

1. HU_NBT -> 3001 -> RDC_SAFETY -> - set to aktiv

Add to favorite F25 – Enable Time-Stamp Display for Call Log

Model: F25

1. HU_NBT -> 3003 -> TIMESTAMP_DISPLAY -> - set to aktiv

Add to favorite F25 – Enable Speech Input for E-Mail or SMS

Model: F25

1. HU_NBT -> 3003 -> SPEECH_2_TEXT -> - set to aktiv

Add to favorite F25 – Disable Audible Chirp/Beep When Locking Car

Model: F25

1. HU_NBT -> 3000 -> ACOUSTICAL_LOCK_CONFIRM -> - set to nicht_aktiv

Add to favorite F25 – Enable Full Text Lines in Office While Driving

Model: F25

1. HU_NBT -> 3003 -> PIM_DRIVING_TEXT_LENGTH -> - set to whole text_07

Add to favorite F25 – Disable Office Function Speed Lock-Out

Model: F25

1. HU_NBT -> 3000 -> OFFICE_MESSAGES_SPEEDLOCK_CONDITION -> - set to nicht_aktiv

Add to favorite F25 – Enable the function of saving video files to NBT Hard Drive for play later

Model: F25

1. HU_NBT -> 3000 -> ENT_MC_VIDEO_SUPPORT -> - set to aktiv

Add to favorite F25 – Add Weather Band Radio (CIC Only)

Model: F25

1. HU_CIC -> 3002 -> RADIO_WEATHERBAND -> - set to aktiv

Add to favorite F25 – Turn Signals in HUD

Model: F25

1. Enable Turn Signals in HUD - HU_NBT -> 3001 -> HUD_TURNSIGNAL -> - set to aktiv
2. Add Turn-Signals to HUD - HU_NBT -> 3000 -> HUD_TURNSIGNAL -> - set to aktiv
3. Show Turn Signals in HUD - KOMBI -> 3008 -> HUD_PIA_BLINKER -> - set to aktiv
4. Show Turn Signals in HUD - KOMBI -> 3000 -> BLINKER_HUD_ENABLE -> - set to aktiv

Add to favorite F25 – Enable Volume On-Screen Display

Model: F25

1. HU_NBT -> 3002 -> VOLUME_POPUP_DISPLAY -> - set to aktiv

Add to favorite F25 – Enable Sports Displays

Model: F25

1. HU_NBT -> 3000 -> EFF_DYN_SPORT_CID -> - set to aktiv
2. HU_NBT -> 3000 -> EFF_DYN_SPORT_UNIT -> - set to aktiv
3. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> DREHMOMENT -> - set to lb_ft (displays ft lb)
4. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> LEISTUNG -> - set to ps (displays hp)

Add to favorite F25 – Enable ///M LapTimer

Model: F25

1. HU_NBT -> 3000 -> M_LAPTIMER -> - set to aktiv

Add to favorite F25 – Disable Auto-Locking of Doors once begin driving

Model: F25

1. HU_NBT -> 3000 -> DOOR_LOCK_AFTER_DRIVING_AWAY -> - set to nicht_aktiv

Add to favorite F25 – Enable Siri Voice Control

Model: F25

1. HU_NBT -> 3003 -> CE_DEVICE_SPEECH_RECOGNITION -> - set to aktiv

Add to favorite F25 – Set cell phone ringer as primary

Model: F25

1. HU_NBT -> 3001 -> INBAND_RINGING -> - set to aktiv

Add to favorite F25 – Welcome Lights – Add xxx to Welcome Lights

Model: F25

1. FRM -> 3050 -> WL_FUNKTION_AL -> - set to hard_on – werte = 02 (Low Beam)
2. FRM -> 3050 -> WL_FUNKTION_KZL -> - set to werte = 02 (Turn Signal)
3. FRM -> 3050 -> WL_FUNKTION_NSW -> - set to werte = 02 (Fog Lights)
4. FRM -> 3050 -> WL_FUNKTION_SSL -> - set to werte = 02 (Tail Lights)

Add to favorite F25 – High-Beam Assistant – Auto-On

Model: F25

1. FRM -> 3050 -> FLA_AUO_AKTIV -> - set to automatisch
2. FRM -> 3050 -> FLA_VERBAUT -> - set to aktiv
3. KAFAS2 -> 3050 -> FLA_ON_OFF -> - set to aktiv

Add to favorite F25 – Brake-Force Flashing on Hard Braking

Model: F25

1. FRM -> 3050 -> ESS_ERSCHEINUNGSBILD -> - set to bremslicht blinkend
2. FRM -> 3050 -> ESS_ON_VERZ -> - set to US
3. FRM -> 3050 -> ESS_GESCHW_SCHWELLE -> - set to US

Add to favorite F25 – Fog Lights stay on w/ High Beams

Model: F25

1. FRM -> 3050 -> NSW_AUS_BEI_FL -> - set to nicht_aktiv

Add to favorite F25 – Rear Tails & Angel Eyes on as DRL

Model: F25

1. FRM -> 3050 -> DRL_MODUS -> - set to drl_s

Add to favorite F25 – Opening FRONT doors won’t interrupt windows

Model: F25

1. FRM -> 3030 -> FH_TUER_AUF_STOP_MAUT -> - set to nickt_aktiv

Add to favorite F25 – Tilt Passenger Mirror farther down when in reverse

Model: F25

1. FRM -> 3020 -> ASP_BORDSTEINAUTOMATIK_DELTA -> - set to Werte=4B

Add to favorite F25 – Angel-Eyes Full Brightness (with headights on)

Model: F25

1. FRM -> 3060 -> U_EFF_POL -> - set to wert_05__13,0V

Add to favorite F25 – Start Car by pushing button (hold brake not needed)

Model: F25

1. CAS -> 3000 -> TC_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. CAS -> 3000 -> TC_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Add to favorite F25 – Set Mirror Fold Delay Time

Model: F25

1. CAS -> 3003 -> KMFRT_SCHLIESSEN -> - set to Werte=00

Add to favorite F25 – Close Mirrors/Windows/SunRoof from FOB or CA

Model: F25

1. CAS -> 3003 -> KOMFORTSCHLIESSUNG_FB -> - set to aktiv
2. CAS -> 3003 -> KOMFORTSCHLIESSUNG_PA -> - set to aktiv
3. FRM -> 3020 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> - set to aktiv

Add to favorite F25 – Electronics off when door opened

Model: F25

1. CAS -> 3000 -> TC_LOGIC_KLR_OFF_DOOR -> - set to aktiv

Add to favorite F25 – Unlock all doors with engine off (Single-Pull Handles)

Model: F25

1. CAS -> 3002 -> ER-KEYOUT_AUTOVR -> - set to aktiv

Add to favorite F25 – Auto Start/Stop – Remember LAST Setting

Model: F25

1. CAS -> 3000 -> TCM_MSA_MEMORY -> - set to aktiv

Add to favorite F25 – Auto Start/Stop OFF by default

Model: F25

1. CAS -> 3000 -> TCM_MSA_DEFAULT_OFF -> - set to aktiv

Add to favorite F25 – SeatBelt Reminders/Sound OFF

Model: F25

1. ACSM -> 3000 -> SBR_PreWarning_Fahrer -> - set to nicht_aktiv
2. ACSM -> 3000 -> SBR_PreWarning_Beifahrer -> - set to nicht_aktiv
3. ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> - set to nicht_aktiv
4. ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> - set to nicht_aktiv

Add to favorite F25 – Disable Welcome 3 Gongs

Model: F25

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv

Add to favorite F25 – SeatBelt Reminder Lights OFF

Model: F25

1. ACSM -> 3000 -> Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF -> - set to nicht_aktiv
2. ACSM -> 3000 -> Gurtzustandsanzeige_Fahrer_GFW_GZA_FA -> - set to nicht_aktiv

Add to favorite F25 – Re-Code for Enhanced Bluetooth

Model: F25

Notes:

1. Change FA (VO) to Remove 6NH & Add 6NS from VO

2. VO Code HU_NBT Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code HU_NBT Modules … or re-code if coding was already present

Add to favorite F25 – Re-Code for Dazzle Headlights (LED Adaptive Headlights like EU-Spec)

Model: F25

Notes:

1. Change FA (VO) to Remove 5AP & 8S4 from VO

2. VO Code FRM Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

3. VO Code KAFAS2 Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code FRM or KAFAS2 Modules … or re-code if coding was already present

Add to favorite F25 – The telephone ringtone is transferred to the Combox

Model: F25

1. CMB_MEDIA -> 3001 TELEPHONE_PARAMETER -> INBAND_RINGING -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F25 – Add Pressure and Temperature Readings to the TPMS Screen

Model: F25

1. HU_CIC -> 3001 EXBOX -> RDC_SAFETY -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F25 – Disables camera legal disclaimer

Model: F25

1. HU_CIC -> 3001 EXBOX -> MACRO_CAM_LEGALDISCLAIMER -> ld_mit_timeout set to kein_ld
2. HU_CIC -> 3001 EXBOX -> MACRO_NIVICAM_LDISCLAIMER -> ld_mit_timeout set to kein_ld

Add to favorite F25 – Disables iDrive legal disclaimer during iDrive startup

Model: F25

1. HU_CIC -> 3001 EXBOX -> MACRO_CAM_LEGALDISCLAIMER -> ld_mit_timeout set to kein_ld

Add to favorite F25 – DVD in Motion

Model: F25

1. HU_CIC -> 3000 HMI -> SPEEDLOCK_X_KMH_MAX -> 3_kmh = 3 or 8_kmh = 8 set to value = FF
2. HU_CIC -> 3000 HMI -> SPEEDLOCK_X_KMH_MIN -> 3_kmh = 3 or 8_kmh = 8 set to value = FF
3. HU_CIC -> 3000 HMI -> VIDEO_NUR_MIT_HANDBREMSE -> - set to nicht_aktiv / Werte=00

Add to favorite F25 – Unlock doors when engine is stopped. Allows single pull to open doors

Model: F25

1. CAS -> 3002 CLM -> ER_KEYOUT_AUTOVR -> nicht_aktiv / Werte=00 set to aktiv / Werte=01

Add to favorite F15 – Enable TJA (ACC-STOP and GO requried). In addition you need to purchase the Steering wheel with touch sensor, sensor module and the wiring harness. (Part numbers in thread below)

Model: F15

1. NEEDED - ICM -> 3000 -> C-Stauassistant Vorhanden -> nicht aktiv set to aktiv
2. NEEDED - BDC_BODY -> -> ComAdapterPdu_31_Anzeige_Fahrerassistentsystem -> nicht aktiv set to aktiv
3. NEEDED - BDC_BODY -> -> HOD_Verbaut -> nicht aktiv set to aktiv
4. NEEDED - BDC_BODY -> -> LIN_VARIANTE_MFL -> ACC_Sport_SLD (21) set to ACC_Sport_STA_SDL (25)
5. NEEDED - BDC_BODY -> -> PERSONEN_WARNUNG_STA -> nicht aktiv set to aktiv
6. NEEDED - KOMBI -> -> DISP_CC_DRASY_ALIVE -> nicht aktiv set to aktiv
7. NEEDED - KOMBI -> -> DISP_CC_DRASY_CRC -> nicht aktiv set to aktiv
8. NEEDED - KOMBI -> -> DISP_CC_DRASY_TIMEOUT -> nicht aktiv set to aktiv
9. NEEDED - KOMBI -> -> DISP_DRASY_ALIVE -> nicht aktiv set to aktiv
10. NEEDED - KOMBI -> -> DISP_DRASY_APPL -> nicht aktiv set to aktiv
11. NEEDED - KOMBI -> -> DISP_DRASY_CRC -> nicht aktiv set to aktiv
12. NEEDED - KOMBI -> -> DISP_DRASY_TIMEOUT -> nicht aktiv set to aktiv
13. NEEDED - KOMBI -> -> STA_ENABLE -> nicht aktiv set to aktiv
14. OPTIONAL This will let you increase the speed limit for TJA (MPH) - ICM -> 3000 -> C_QalcRel_v_Tacho_aktiv_mph -> Werte= 20 set to Werte= 3F
15. OPTIONAL This will let you increase the speed limit for TJA (KMH) - ICM -> 3000 -> C_QalcRel_v_Tacho_aktiv_kmh -> Werte= 32 set to Werte= 63
16. OPTIONAL This will let you enable the function on all roads - ICM -> 3000 -> C_STA_Einschraenkung -> Autobahn set to keine Einschreankung

Notes:

Step 1: Add 5AR to VO Code and VO code the following ECUs: BDC_BODY, KAFAS, ICM and KOMBI.
Step 2: FDL code the following items, some are optional and some are needed pay attention to the line.

Post #1 for 6WB Retrofit: http://f15.bimmerpost.com/forums/showthread.php?p=16691553#post16691553
Post #107 for NHGB/GFHB Pre and post 06/15 production: http://f15.bimmerpost.com/forums/showthread.php?t=1110249&highlight=Anti+dazzle+solved&page=5
Post #119, #128 #131 for TJA (Traffic Jam Assistand) Retrofit: http://f15.bimmerpost.com/forums/showthread.php?t=875827&highlight=euro+taillight+retrofit&page=6

Add to favorite F15 – Turn off Amber Sidermarker on Headlight’s

Model: F15

1. FLE -> -> LM_ID_LT04 -> F015Wert_SA552_SAE set to F015Wert
2. FLE -> -> LM04_Name -> F015Wert_SA552_SAE set to F015Wert

Add to favorite F15 – Turn off dim for (front) DLR when Headlights are on. (DLR Stay 100%)

Model: F15

1. FLE -> -> POLI1_Idx -> F015Wert_SA552_SAE set to Unknown = Change 3rd byte from 0C to OA
2. FLE -> -> POLI2_Idx -> F015Wert_SA552_SAE set to Unknown = Change 3rd byte from 0C to OA
3. FLE -> -> POLI3_Idx -> F015Wert_SA552_SAE set to Unknown = Change 3rd byte from 0C to OA

Add to favorite F15 – Sailing / Coasting Function – EcoPro Mode

Model: F15

1. Add Tick-box in Eco-Pro Config Screen - HU_NBT -> 3000 HMI -> EFF_DYN_SAILING -> nicht_aktiv set to aktiv
2. Add Sailing Odometer in Eco-Pro Status Screen - HU_NBT -> 3000 HMI -> SAILING_COUNTER -> nicht_aktiv set to aktiv
3. DME -> 3701 OHNE_ZEITLIMIT, 10 -> SEGELN -> off set to on
4. DME -> 3701 OHNE_ZEITLIMIT, 10 -> SEGELN_CPL -> off set to on
5. EGS -> 3000 Applikation, 02 -> SEGELN -> nicht_aktiv set to aktiv
6. ICM -> 3000 Daten, F8 -> C_Segeln_vorhanden -> nicht_aktiv set to aktiv

Add to favorite F15 – Camera stays on on-drive

Model: F15

1. PMA2 -> -> V_SCHWELLE_1_KMH -> werte=23 set to werte=FF
2. PMA2 -> -> V_SCHWELLE_2_KMH -> werte=0F set to werte=FF
3. PMA2 -> -> D_SCHWELLE_1_KMH -> werte=32 set to werte=FF
4. PMA2 -> -> D_SCHWELLE_2_KMH -> werte=0A set to werte=FF

Add to favorite F15 – Enable Launch Control (requires both SAT coding above)

Model: F15

1. EGS -> -> LC -> nicht_aktiv set to aktiv

Add to favorite F15 – Enable Sport Automatic Transmission (SAT)

Model: F15

1. EGS -> -> SPORTSCHALTER -> nicht_aktiv set to aktiv
2. EGS -> -> SPORTSCHALTER_ALT -> nicht_aktiv set to aktiv

Add to favorite F15 – Ventilation Temperature

Model: F15

1. Front Seat Ventilation Temperature - SM2 -> 3008 -> SKL_TEMP_SOLL_ST1_KI -> werte=23 set to werte=19
2. [6d] driver side - SM2 -> 3008 -> SKL_TEMP_SOLL_ST2_KI -> werte=21 set to werte=14
3. [6e] passenger side - SM2 -> 3008 -> SKL_TEMP_SOLL_ST3_KI -> werte=1E set to werte=10
4. ST1 = position 1 - SM2 -> 3008 -> SKL_TEMP_SOLL_ST1_LE -> werte=23 set to werte=19
5. ST2 = position 2 - SM2 -> 3008 -> SKL_TEMP_SOLL_ST2_LE -> werte=21 set to werte=14
6. ST3 = position 3 - SM2 -> 3008 -> SKL_TEMP_SOLL_ST3_LE -> werte=1E set to werte=10

Add to favorite F15 – Heating Temperature

Model: F15

1. Front Seat Heating Temperature - SM2 -> 3007 -> SHZ_TEMP_SOLL_ST1_KI -> werte=20 set to
2. [6d] driver side - SM2 -> 3007 -> SHZ_TEMP_SOLL_ST2_KI -> werte=24 set to
3. [6e] passenger side - SM2 -> 3007 -> SHZ_TEMP_SOLL_ST3_KI -> werte=2D set to
4. ST1 = position 1 - SM2 -> 3007 -> SHZ_TEMP_SOLL_ST1_LE -> werte=1D set to
5. ST2 = position 2 - SM2 -> 3007 -> SHZ_TEMP_SOLL_ST2_LE -> werte=21 set to
6. ST3 = position 3 - SM2 -> 3007 -> SHZ_TEMP_SOLL_ST3_LE -> werte=2B set to

Notes:

http://www.bimmerfest.com/forums/showthread.php?t=763271

This thread explains everything and has a PDF for the werte to degree changes.

Add to favorite F15 – Grass/Roadside Edge Detection to Lane Departure

Model: F15

1. KAFAS -> 3020 -> ROAD_EDGE_WARNING_ENABLED -> disabled set to detection_for_grass_edge_and_curb_stone

Add to favorite F15 – Remember Air Re-Circulation Setting from previous shutdown

Model: F15

1. IHKA2 -> 3000 -> MEMORY_UMLUFT -> nicht_aktiv set to aktiv

Add to favorite F15 – AC will remember if ‘Off’ or ‘On’ from previous shutdown

Model: F15

1. IHKA2 -> 3000 -> OFF_MEMORY -> nicht_aktiv set to aktiv

Add to favorite F15 – Cornering Wizard always on not only whit signal light

Model: F15

1. BDC_BODY -> 3110 -> ASP_ABA_AKTIVIERUNG Current -> nicht_aktiv set to aktiv

Add to favorite F15 – Change Ambient Lighting

Model: F15

1. Dome - BDC_BODY -> 3070 -> GROUP_0_FARBE_ENSEMBLE_1 -> orange set to orange, white
2. Dashboard - BDC_BODY -> 3070 -> AMBIENTE_FARBE_ENSEMBLE_1_LAYER_1 -> orange set to hellrot (there are 12 colors to choose from/ blue, green, violet etc.)
3. Door's - BDC_BODY -> 3070 -> AMBIENTE_FARBE_ENSEMBLE_1_LAYER_2 -> orange set to hellrot (there are 12 colors to choose from/ blue, green, violet etc.)
4. Floor's - BDC_BODY -> 3070 -> AMBIENTE_FARBE_ENSEMBLE_1_LAYER_3 -> orange set to hellrot (there are 12 colors to choose from/ blue, green, violet etc.)

Add to favorite F15 – HBA Active When Headlights Manually On

Model: F15

1. BDC_BODY -> 3068 -> FLA_AKTIVIERUNG Current -> LDS in A set to LDS in A or 2

Notes:

This allows you to use HBA (high beam assistant) when you manually turn the headlights on with the headlight knob.

Add to favorite F15 – Changing the # of Turn Signal Blinks

Model: F15

1. BDC_BODY -> 3068 -> BLINKZYKLEN_ANZAHL_TIPP Current -> werte=02 set to werte=04

Notes:

werte value + 1 = # of blinks;
default is 3 blinks

Add to favorite F15 – Dimming Side View Mirrors

Model: F15

1. (driver) - BDC_BODY -> 3120 -> CODDT_00_SCAL_DIM_ECR_LIN Current -> werte=20 set to werte=39
2. (passenger) - BDC_BODY -> 3120 -> CODDT_01_SCAL_DIM_ECR_LIN -> werte=20 set to werte=39

Add to favorite F15 – Rain Light Sensor Reduced Sensitivity

Model: F15

1. BDC_BODY -> 3130 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> standard set to unempfindlich, empfindlich

Add to favorite F15 – Turn Off Radio and GPS when engine off and driver door is open

Model: F15

1. BDC_BODY -> 3020 -> TCM_LOGIC_R_OFF_DOOR -> nicht_aktiv set to aktiv

Add to favorite F15 – Stop flickering of custom led FOG LIGHTS

Model: F15

1. BDC_BODY -> -> NSW_L_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
2. BDC_BODY -> -> NSW_L_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
3. BDC_BODY -> -> NSW_L_KURZSCHLUSS -> aktiv set to nicht_aktiv
4. BDC_BODY -> -> NSW_L_IS_LED -> nicht_aktiv set to aktiv
5. BDC_BODY -> -> NSW_R_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
6. BDC_BODY -> -> NSW_R_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
7. BDC_BODY -> -> NSW_R_KURZSCHLUSS -> aktiv set to nicht_aktiv
8. BDC_BODY -> -> NSW_R_IS_LED -> nicht_aktiv set to aktiv

Add to favorite F15 – Stop flickering of custom led REAR TURN SIGNAL bulbs

Model: F15

1. BDC_BODY -> -> FRA_H_L_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
2. BDC_BODY -> -> FRA_H_L_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
3. BDC_BODY -> -> FRA_H_L_IS_LED -> nicht_aktiv set to aktiv
4. BDC_BODY -> -> FRA_H_R_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
5. BDC_BODY -> -> FRA_H_R_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
6. BDC_BODY -> -> FRA_H_R_IS_LED -> nicht_aktiv set to aktiv

Add to favorite F15 – Stop flickering of custom led FRONT TURN SIGNAL bulbs

Model: F15

1. BDC_BODY -> -> FRA_V_L_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
2. BDC_BODY -> -> FRA_V_L_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
3. BDC_BODY -> -> FRA_V_L_IS_LED -> nicht_aktiv set to aktiv
4. BDC_BODY -> -> FRA_V_R_KALTUEBERWACHUNG -> aktiv set to nicht_aktiv
5. BDC_BODY -> -> FRA_V_R_WARMUEBERWACHUNG -> aktiv set to nicht_aktiv
6. BDC_BODY -> -> FRA_V_R_IS_LED -> nicht_aktiv set to aktiv

Add to favorite F15 – Auto Start/Stop remembers if set to ‘On’ or ‘Off’ from previous shutdown

Model: F15

1. BDC_BODY -> 3023 -> TCM_MSA_MEMORY -> nicht_aktiv set to aktiv

Add to favorite F15 – Auto Start/Stop set to ‘off’ at every startup for Eco Pro Mode

Model: F15

1. BDC_BODY -> 3023 -> TCM_MSA_DEFAULT_OFF -> aktiv set to nicht_aktiv

Add to favorite F15 – Auto Start/Stop set to ‘off’ at every startup for Comfort Mode

Model: F15

1. BDC_BODY -> 3023 -> TCM_MSA_DEFAULT_OFF -> nicht_aktiv set to aktiv

Add to favorite F15 – Handles on while reversing

Model: F15

1. BDC_BODY -> 3070 -> OVT_BEI_RUECKFAHRLICHT -> nicht_aktiv set to aktiv

Add to favorite F15 – Enables fog lights to be on with parking lights

Model: F15

1. BDC_BODY -> 3068 -> NSW_EIN_AUF_LDS_STL -> nicht_aktiv set to aktiv

Add to favorite F15 – Enables Fog Lights with High Beams / Flashers

Model: F15

1. BDC_BODY -> 3068 -> NSW_AUS_BEI_FL -> aktiv set to nicht_aktiv

Add to favorite F15 – VLD (Variable Light Distribution)

Model: F15

1. BDC_BODY -> 3073 -> LUT_FLC_FORWARDLIGHTING_Y -> F015_ohne_AFS set to F015_mit_AFS
2. BDC_BODY -> 3073 -> C_AFS_ENA -> F015_disable set to F015_enable

Add to favorite F15 – Rear Windows won’t stop roll up when open

Model: F15

1. BDC_BODY -> 3051 -> FH_TUERAUF_STOP_MAUT_REAR -> aktiv set to nicht_aktiv

Add to favorite F15 – Opening doors (FRONT) will not interrupt window roll up operation.

Model: F15

1. BDC_BODY -> 3050 -> FH_TUERAUF_STOP_MAUT -> aktiv set to nicht_aktiv

Add to favorite F15 – DRL Taillamp

Model: F15

1. BDC_BODY -> 3068 -> TFL_MODUS -> drl_s set to drl_s (drl_s - 100% parking light brightness, tfl_s - 50% parking light brightness)
2. BDC_BODY -> 3064 -> MAPPING_TAGFAHRL_1_H_L_OUTPUT -> - set to sl_l
3. BDC_BODY -> 3064 -> MAPPING_TAGFAHRL_1_H_R_OUTPUT -> - set to sl_r
4. BDC_BODY -> 3065 -> MAPPING_TAGFAHRL_2_H_L_OUTPUT -> - set to sl_2_l
5. BDC_BODY -> 3065 -> MAPPING_TAGFAHRL_2_H_R_OUTPUT -> - set to sl_2_r

Add to favorite F15 – Unlock when STOP Engine (newer software)

Model: F15

1. BDC_BODY -> -> CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING -> nicht_aktiv set to aktiv

Add to favorite F15 – Unlock when STOP Engine (older software)

Model: F15

1. BDC_BODY -> 3040 -> VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK -> nicht_aktiv set to aktiv

Add to favorite F15 – Open/Close Side Mirror

Model: F15

1. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> nicht_aktiv set to aktiv
2. ** Also needed for Window via Keyfob or CA - BDC_BODY -> 3110 -> ASP_AUSKLAPPEN_NACH_KOMFORTSCHLIESSEN -> nicht_aktiv set to aktiv

Add to favorite F15 – Side Mirror closing time delay

Model: F15

1. BDC_BODY -> 3056 -> KOMFORT_SCHLIESSEN -> werte=0f (~2s) set to werte=00 (instant)

Add to favorite F15 – Open/Close Window via Key

Model: F15

1. BDC_BODY -> 3056 -> KOMFORTOEFFNUNG -> nicht_aktiv set to aktiv
2. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG -> nicht_aktiv set to aktiv

Add to favorite F15 – Close Window via Comfort Access

Model: F15

1. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG_PA (needed for side mirrors) -> nicht_aktiv set to aktiv

Add to favorite F15 – Open/Close Window via Keyfob

Model: F15

1. BDC_BODY -> 3056 -> KOMFORTOEFFNUNG_FB -> nicht_aktiv set to aktiv
2. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG_FB (needed for side mirrors) -> nicht_aktiv set to aktiv

Add to favorite F15 – Open Trunk Instantly via Keyfob

Model: F15

1. BDC_BODY -> 30D0 -> RC_TIME_DELAY_BOOTLID -> wert_01 (5 seconds) set to wert_00 (0 seconds)

Add to favorite F15 – Close trunk via Keyfob/Inside button

Model: F15

1. HKFM -> 3010 -> SCH_FBD -> nicht_aktiv set to aktiv
2. HKFM -> 3010 -> SCH_TOEHKI -> nicht_aktiv set to aktiv
3. HKFM -> 3010 -> TASTER_FBD -> nicht_aktiv set to aktiv

Add to favorite F15 – Disable driver/passenger seatbelt chime & red cluster icon

Model: F15

1. ACSM -> 3000 -> Gurtzustandsanzeige_Fahrer_GWF_GZA_FA -> aktiv set to nicht_aktiv
2. ACSM -> 3000 -> Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF -> aktiv set to nicht_aktiv
3. ACSM -> 3000 -> Initialwarnung_GWF_IW -> aktiv set to nicht_aktiv
4. ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> aktiv set to nicht_aktiv
5. ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> aktiv set to nicht_aktiv
6. ACSM -> 3000 -> SBR_PreWarning_Fahrer -> aktiv set to nicht_aktiv
7. ACSM -> 3000 -> SBR_PreWarning_Beifahrer -> aktiv set to nicht_aktiv

Add to favorite F15 – Active Blind Spot at lower speed

Model: F15

1. ICM -> 3000 -> C_ZSW_Aktivierunggeschwindigkeit_Funktion_low -> 50kmh set to 20kmh (lower gives error)

Add to favorite F15 – ACC Distance

Model: F15

1. ICM -> 3000 -> C_Abstandsstufe_init -> Werte=04 set to Werte=01

Add to favorite F15 – Deactivate First Fuel Reserve Warning at 50km(31.07mi)

Model: F15

1. KOMBI -> 3000 -> CC_RW_WARNUNG_2 -> 50_mls set to inaktiv

Add to favorite F15 – KOMBI/HUD startup logo

Model: F15

1. KOMBI -> 3000 -> BMW_LOGO -> bmw set to mpm (M550d on 6WB), bmw_i, x5 (X5M50d on 6WB), x6

Add to favorite F15 – Show Speed on instrument cluster via switching BC button

Model: F15

1. KOMBI -> 3000 -> BC_DIGITAL_V -> nicht_aktiv set to aktiv

Add to favorite F15 – HUD Lane Departure (does not work on 6WB)

Model: F15

1. KOMBI -> 3000 -> HUD_TLC_ENABLE -> nicht_aktiv set to aktiv

Add to favorite F15 – HUD Turnsignal (does not work on 6WB)

Model: F15

1. HU_NBT -> 3001 -> HUD_TURNSIGNAL -> nicht_aktiv set to aktiv
2. KOMBI -> 3008 -> HUD_PIA_BLINKER -> nicht_aktiv set to aktiv
3. KOMBI -> 3000 -> BLINKER_HUD_ENABLE -> nicht_aktiv set to aktiv

Add to favorite F15 – Enable video playback via USB

Model: F15

1. HU_NBT -> 3003 -> API_USB_VIDEO -> none set to both

Add to favorite F15 – Enable other playable video format via USB

Model: F15

1. HU_NBT -> 3000 -> ENT_CODEC_OGG -> nicht_aktiv set to aktiv
2. HU_NBT -> 3000 -> ENT_CODEC_XVID -> nicht_aktiv set to aktiv
3. HU_NBT -> 3000 -> ENT_CODEC_VCD -> nicht_aktiv set to aktiv

Add to favorite F15 – DVD in Motion

Model: F15

1. HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> aktiv set to nicht_aktiv
2. (if available) - HU_NBT -> 3000 -> -> - set to nicht_aktiv
3. (if available) - HU_NBT -> 3000 -> -> - set to none
4. HU_NBT -> 3000 -> -> - set to werte=ff
5. HU_NBT -> 3000 -> -> - set to werte=ff

Add to favorite F15 – Shows entire text message on iDrive rather than 3 lines

Model: F15

1. HU_NBT -> 3003 -> PIM_Driving_Text -> up_to_three_lines set to Whole_text

Add to favorite F15 – Enables Time-Stamp Display for Call Logs

Model: F15

1. HU_NBT -> 3003 -> TIMESTAMP_DISPLAY -> nicht_aktiv set to aktiv

Add to favorite F15 – Tire Pressure and Temperature on Vehicle Status

Model: F15

1. HU_NBT -> 3001 -> RDC_DRUCK_TEMP -> druck set to druck_und_temperatur

Add to favorite F15 – Navi zooms in when approaching a turn

Model: F15

1. HU_NBT -> 3000 -> NAVI_AUTOZOOM -> nicht_aktiv set to aktiv

Add to favorite F15 – Rear View Camera Zoom (trailer hitch)

Model: F15

1. HU_NBT -> 3001 -> MACRO_TRAILER_COUPLING -> nicht_aktiv set to aktiv

Add to favorite F15 – Phone Ringtone Plays Through Car Bluetooth When Called

Model: F15

1. HU_NBT -> 3001 -> INBAND_RINGING -> nicht_aktiv set to aktiv

Add to favorite F15 – Gong/Chime Sound

Model: F15

1. HU_NBT -> 3002 -> SOUND_SIGNAL_SET -> bmw set to bmw_i, mini, rolls royce

Add to favorite F15 – X Drive Display

Model: F15

1. HU_NBT -> 3000 -> X_VIEW -> nicht_aktiv set to aktiv

Add to favorite F15 – Changes Sports Display color from Orange to Red/Silver

Model: F15

1. HU_NBT -> 3000 -> M_VEHICLE -> nicht_aktiv set to aktiv

Add to favorite F15 – M Splash Screen

Model: F15

1. HU_NBT -> 3001 -> STARTUP_EMBLEM -> variant_00 set to variant_01

Add to favorite F15 – Disables Cameras legal disclaimer

Model: F15

1. HU_NBT -> 3001 -> MACRO_CAM_LEGALDISCLAIMER -> id_mit_timeout set to kein_ld
2. HU_NBT -> 3001 -> MACRO_NIVICAM_LDISCLAIMER -> id_mit_timeout set to kein_ld

Add to favorite F15 – Disables iDrive legal disclaimer

Model: F15

1. HU_NBT -> 3001 -> LEGAL_DISCLAIMER_TIME -> id_mit_timeout set to kein_ld

Add to favorite F85 – Enable Rear-View Camera at all Speeds

Model: F85

1. PMA2 -> 300B -> D_SCHWELLE_2_KMH -> - set to Werte = FF
2. PMA2 -> 300B -> V_SCHWELLE_2_KMH -> - set to Werte = FF

Add to favorite F85 – Enable GPS-Sync for Clock

Model: F85

1. KOMBI -> 3000 -> GPS_UHR -> - set to aktiv

Add to favorite F85 – Show Turn Signals in HUD

Model: F85

1. KOMBI -> 3008 -> HUD_PIA_BLINKER -> - set to aktiv
2. KOMBI -> 3000 -> BLINKER_HUD_ENABLE -> - set to aktiv

Add to favorite F85 – Show Digital Speed in MPH in Cluster

Model: F85

1. KOMBI -> 3000 -> BC_DIGITAL_V -> - set to aktiv

Add to favorite F85 – HVAC System Remembers Last Setting

Model: F85

1. IHKA2 -> 3000 -> OFF_MEMORY -> - set to aktiv

Add to favorite F85 – Enable Surround-View Cameras at all Speeds

Model: F85

1. ICAM -> 3006 -> SV Activation Speed Limit -> - set to werte = FF
2. ICAM -> 3006 -> SV Deactivation Speed Limit -> - set to werte = FF

Add to favorite F85 – Enable Developer Menu

Model: F85

1. HU_NBT -> 3000 -> ENTWICKLER_MENUE -> - set to aktiv

Add to favorite F85 – Enable WiFi Hot-Spot

Model: F85

1. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_COVERART -> - set to aktiv
2. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP_VIDEO -> - set to aktiv
3. HU_NBT -> 3000 -> ENT_MC_WLAN_STREAM_DMP -> - set to aktiv
4. HU_NBT -> 3003 -> WLAN_STATUS -> - set to aktiv
5. HU_NBT -> 3003 -> WLAN_MODUS -> - set to ap
6. HU_NBT -> 3003 -> WLAN_SIGNAL_STRENGTH -> - set to outdoor

Notes:

(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)

Add to favorite F85 – Enable IPCE Web Server @ 172.16.222.1

Model: F85

1. HU_NBT -> 3000 -> IPCE_WEBSERVER -> - set to aktiv

Add to favorite F85 – Add GPS Current Location to Navi Menu Items

Model: F85

1. HU_NBT -> 3000 -> NAVI_POSITION_MENU -> - set to aktiv

Add to favorite F85 – Enable Video Files from USB

Model: F85

1. HU_NBT -> 3000 -> ENT_CODEC_OGG -> - set to aktiv
2. HU_NBT -> 3000 -> ENT_CODEC_XVID -> - set to aktiv
3. HU_NBT -> 3000 -> ENT_CODEC_XVCD -> - set to aktiv

Add to favorite F85 – Navi Fuel-Stop Proposal Along Route

Model: F85

1. HU_NBT -> 3000 -> NAVI_FUELSTOP_PROPOSAL -> - set to aktiv

Add to favorite F85 – Navi Trip-Import

Model: F85

1. HU_NBT -> 3000 -> NAVI_TRIP_IMPORT -> - set to aktiv

Add to favorite F85 – Video-in-Motion activated

Model: F85

1. HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MAX -> - set to werte = FF
2. HU_NBT -> 3000 -> SPEEDLOCK_X_KMH_MIN -> - set to werte = FF
3. HU_NBT -> 3000 -> VIDEO_HANDBRAKE -> - set to nicht_aktiv
4. HU_NBT -> 3000 -> VIDEO_FRONT_LOCKED -> - set to nicht_aktiv
5. HU_NBT -> 3000 -> VIDEO_SPEEDLOCK_CONDITION -> - set to none

Add to favorite F85 – Change Navi Voice to British English

Model: F85

1. HU_NBT -> 3000 -> LANGUAGE_ENGLISH_UK -> - set to master
2. HU_NBT -> 3000 -> LANGUAGE_ENGLISH_US -> - set to nicht_aktiv

Add to favorite F85 – Add Turn-Signals to HUD

Model: F85

1. HU_NBT -> 3000 -> HUD_TURNSIGNAL -> - set to aktiv

Add to favorite F85 – Enable Turn Signals in HUD

Model: F85

1. HU_NBT -> 3001 -> HUD_TURNSIGNAL -> - set to aktiv

Add to favorite F85 – Enable Sports Displays

Model: F85

1. HU_NBT -> 3000 -> EFF_DYN_SPORT_CID -> - set to aktiv
2. HU_NBT -> 3000 -> EFF_DYN_SPORT_UNIT -> - set to aktiv
3. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> DREHMOMENT -> - set to lb_ft (displays ft lb)
4. *To change units displayed to be ft lb and hp - KOMBI -> 3008 -> LEISTUNG -> - set to ps (displays hp)

Add to favorite F85 – Enable Siri Voice Control

Model: F85

1. HU_NBT -> 3003 -> CE_DEVICE_SPEECH_RECOGNITION -> - set to aktiv

Add to favorite F85 – Disable Auto-Locking of Doors once begin driving

Model: F85

1. HU_NBT -> 3000 -> DOOR_LOCK_AFTER_DRIVING_AWAY -> - set to nicht_aktiv

Add to favorite F85 – Set cell phone ringer as primary

Model: F85

1. HU_NBT -> 3001 -> INBAND_RINGING -> - set to aktiv

Add to favorite F85 – High-Beam Assistant – Auto-On

Model: F85

1. BDC_BODY -> 3068 -> FLA_AKTIVIERUNG -> - set to LDS_in_A_oder_2
2. HU_NBT -> 3000 -> HIGH_BEAM_ASSISTANT -> - set to aktiv
3. KAFAS2 -> 3050 -> FLA_ON_OFF -> - set to aktiv

Add to favorite F85 – Close/Open Rear Hatch from Fob & Kick Panel

Model: F85

1. HKFM_LS -> 3010 -> TASTER_FBD -> - set to aktiv
2. HKFM_LS -> 3010 -> SCH_TOEHKI -> - set to aktiv
3. HKFM_LS -> 3010 -> SCH_FBD -> - set to aktiv

Notes:

*** May take up to 30 minutes to begin working after coding ***

Add to favorite F85 – Activate Rear Fog Lights feature for Lighting Switch (requires mod of US switch or ECE switch

Model: F85

1. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_L_output -> - set to nsw_l
2. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_L_Function -> - set to nebelscheinwerfer
3. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_R_output -> - set to nsw_l
4. BDC_BODY -> 3063 -> Mapping_Nebelschlussl_R_Function -> - set to nebelscheinwerfer
5. BDC_BODY -> 3063 -> NSL_Verbaut -> - set to Verbaut

Add to favorite F85 – Turn On Tail Lights with DRLs

Model: F85

1. BDC_BODY -> 3063 -> MAPPING_TAGFAHRL_1_V_L_OUTPUT -> - set to tfl_l
2. BDC_BODY -> 3063 -> MAPPING_TAGFAHRL_1_V_R_OUTPUT -> - set to tfl_r
3. BDC_BODY -> 3063 -> MAPPING_TAGAHRL_2_V_L_OUTPUT -> - set to werte=04
4. BDC_BODY -> 3063 -> MAPPING_TAGAHRL_2_V_R_OUTPUT -> - set to werte=04

Add to favorite F85 – Auto Light Sensitivity Increase

Model: F85

1. BDC_BODY -> 3080 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> - set to see notes
2. BDC_BODY -> 3130 -> RLS_FLC_SCHWELLWERT_SATZ -> - set to see notes

Notes:

normal = normal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Add to favorite F85 – Disable Headlight Washers

Model: F85

1. BDC_BODY -> 3080 -> WW_SCHEINWERFERREININUNG -> - set to nicht_aktiv

Add to favorite F85 – Enable Illumination of Exterior Door Handle LEDs when in Reverse

Model: F85

1. BDC_BODY -> 3070 -> OVT_BEI_REUCKFAHRLICHT -> - set to aktiv

Add to favorite F85 – Turn on Brake Force Flashing with Hard Braking

Model: F85

1. BDC_BODY -> 3068 -> ESS_AKTIVIERBARER_AUSGANG -> - set to bremsclicht blinkend

Add to favorite F85 – Change Triple-Blink Count to another Value

Model: F85

1. BDC_BODY -> 3068 -> BLINKZYKLEN_ANZAHL_TIPP -> - set to werte = # blinks-1 (4 blinks = werte=3)

Add to favorite F85 – Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte)

Model: F85

1. BDC_BODY -> 3110 -> ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN -> - set to werte=14 (12Mph)

Add to favorite F85 – Increase Angel Eyes Brightness to 100%

Model: F85

1. BDC_BODY -> 3062 -> MAPPING_STANDL_V_L_PWM_1_STANDARD -> - set to 100%
2. BDC_BODY -> 3062 -> MAPPING_STANDL_V_R_PWM__1_STANDARD -> - set to 100%
3. BDC_BODY -> 3062 -> MAPPING_PARKL_V_L_PWM_1_LEFT -> - set to 100%
4. BDC_BODY -> 3062 -> MAPPING_PARKL_V_L_PWM_2_RIGHT -> - set to 100%

Add to favorite F85 – Ambiance Lighting controlled independent from Dimmer Switch

Model: F85

1. BDC_BODY -> 3070 -> AMBIENTE_NACHFUEHRUNG -> - set to nickt_aktiv

Add to favorite F85 – Opening REAR doors won’t interrupt windows

Model: F85

1. BDC_BODY -> 3051 -> FH_TUERAUF_STOP_MAUT_REAR -> - set to nickt_aktiv

Add to favorite F85 – Opening FRONT doors won’t interrupt windows

Model: F85

1. BDC_BODY -> 3050 -> FH_TUERAUF_STOP_MAUT -> - set to nickt_aktiv

Add to favorite F85 – Tilt Passenger Mirror farther down when in reverse

Model: F85

1. BDC_BODY -> 3110 -> ASP_BORDSTEINAUTOMATIK_DELTA -> - set to werte=4B

Add to favorite F85 – Start Car by pushing button (hold brake not needed)

Model: F85

1. BDC_BODY3 -> 3020 -> TCM_STARTLOCK_BRAKE -> - set to nicht_aktiv
2. BDC_BODY3 -> 3020 -> TCM_STARTLOCK_DRIVINGREADINESS -> - set to nicht_aktiv

Add to favorite F85 – Set Mirror Fold Delay Time

Model: F85

1. BDC_BODY -> 3056 -> KOMFORT_SCHLIESSEN -> - set to werte=00

Add to favorite F85 – Close Mirrors/Windows/SunRoof from FOB or CA

Model: F85

1. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG_FB -> - set to aktiv
2. BDC_BODY -> 3056 -> KOMFORTSCHLIESSUNG_PA -> - set to aktiv
3. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN -> - set to aktiv
4. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN -> - set to aktiv
5. BDC_BODY -> 3110 -> ASP_BEIKLAPPEN_NACH_KOMFORTSCHLIESSEN -> - set to aktiv

Add to favorite F85 – Electronics off when door opened

Model: F85

1. BDC_BODY -> 3020 -> TCM_LOGIC_R_OFF_DOOR -> - set to aktiv

Add to favorite F85 – Unlock all doors with engine off (Single-Pull Handles)

Model: F85

1. BDC_BODY3 -> 3040 -> VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK -> - set to aktiv

Add to favorite F85 – Auto Start/Stop – Remember LAST Setting

Model: F85

1. BDC_BODY3 -> 3023 -> TCM_MSA_MEMORY -> - set to aktiv

Add to favorite F85 – Auto Start/Stop OFF by default

Model: F85

1. BDC_BODY3 -> 3023 -> TCM_MSA_DEFAULT_OFF -> - set to aktiv

Add to favorite F85 – Disable Active Sound Design

Model: F85

1. ASD -> -> Model Range -> - set to F021
2. ASD -> -> Engine Type -> - set to N20B20

Add to favorite F85 – SeatBelt Reminders/Sound OFF

Model: F85

1. ACSM -> 3000 -> SBR_PreWarning_Fahrer -> - set to nicht_aktiv
2. ACSM -> 3000 -> SBR_PreWarning_Beifahrer -> - set to nicht_aktiv
3. ACSM -> 3000 -> SeatBeltReminder_SBR_Fahrer -> - set to nicht_aktiv
4. ACSM -> 3000 -> SeatBeltReminder_SBR_Beifahrer -> - set to nicht_aktiv

Add to favorite F85 – Disable Welcome 3 Gongs

Model: F85

1. ACSM -> 3000 -> Initialwarnung_GWF_IW -> - set to nicht_aktiv

Add to favorite F85 – SeatBelt Reminder Lights OFF

Model: F85

1. ACSM -> 3000 -> Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF -> - set to nicht_aktiv
2. ACSM -> 3000 -> Gurtzustandsanzeige_Fahrer_GFW_GZA_FA -> - set to nicht_aktiv

Add to favorite F85 – Re-Code for Enhanced Bluetooth

Model: F85

Notes:

1. Change FA (VO) to Remove 6NH & Add 6NS from VO
2. VO Code HU_NBT Module:
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code HU_NBT Module … or re-code if coding was already present

Add to favorite F85 – Re-Code for Dazzle Headlights (LED Adaptive Headlights like EU-Spec)

Model: F85

Notes:

1. Change FA (VO) to Remove 5AP & 8S4 from VO
2. VO Code BDC_BODY, KAFAS2/FLA3, FLE(43), FLE(44):
Read FA(VO) -> Activate FA(VO) -> Read SVT -> Right-Click ECU & Select Code

Now Proceed to code any above ECUS with FDL coding changes … or re-code if coding was already present

Add to favorite G20 – Closing the trunk without delay

Model: G20

1. HRFM -> -> HKL_ROCKERSWITCHPOS2_LONGPRESS_CLOSE -> - set to 00
2. HRFM -> -> HKL_ROCKERSWITCHPOS2_DELAY_CLOSE -> - set to 00, 00
3. HRFM -> -> HKL_REMOTECONTROLLIFTGATEBUTTON_LONGPRESS_CLOSE -> - set to 00
4. HRFM -> -> HKL_REMOTECONTROLLIFTGATEBUTTON_LONGPRESS_CLOSE -> - set to 00, 00

Add to favorite G20 – Increasing the refresh rate of the digital speed

Model: G20

1. DKOMBI4 -> -> DIGIT_GESCHW_UPDATERATE -> 5 set to 2

Add to favorite G20 – The instrument cluster has an M font and a speed scale up to 260/330 km/h

Model: G20

1. For a 260 km/h speedometer - DKOMBI4 -> -> AG_MPA_MSP_VIEW -> - set to mpa_ansicht_260_skala
2. For a 330 km/h speedometer - DKOMBI4 -> -> AG_MPA_MSP_VIEW -> - set to mpa_ansicht_330_skala

Add to favorite G20 – Permanent display of digital speed indicator

Model: G20

1. DKOMBI4 -> -> DIGIT_GESCHW -> - set to anzeige_kmh

Notes:

It is located in different locations depending on the instrument cluster.

Add to favorite G20 – Large digital speed indicator at the bottom of the basic instrument cluster

Model: G20

1. DKOMBI4 -> -> DIGIT_GESCHW_BEHOERDE_ENABLE -> - set to aktiv

Add to favorite G20 – Activating the seat heating menu

Model: G20

1. HU_MGU -> -> AKT_AUTO_SITZE_FRONT -> - set to heizung
2. The AKT_AUTO_LENKRAD parameter for the steering wheel - HU_MGU -> -> AKT_AUTO_LENKRAD -> - set to -
3. BDC_BODY3 -> -> LHZ_CCM_IKF -> - set to aktiv

Notes:

The BDC_BODY -> IKF_ENABLE parameter allows you to set "IKF_ALLE_SITZE" to the automatic heating mode.
(The heated driver's seat turns on automatically only when the seat belt is fastened, the steering wheel and passenger seats turn on immediately).

Add to favorite G20 – Choice of car color and configuration

Model: G20

Notes:

1. HU_MGU -> VEHICLE_COLOR - parameter is responsible for the color (there are a lot of colors);
2. HU_MGU -> TRIM_LINE - parameter is responsible for the car configuration (also a lot).

Add to favorite G20 – Enabling Bowers & Wilkins Sound Profiles

Model: G20

1. HU_MGU -> ????? -> Audio_SYSTEM -> - set to alev4_ram

Notes:

(the harman/kardon system is required to work in the car) The "Sound profiles" item will appear in the "Sound" menu.

Add to favorite G20 – Enable Tachometer in Sports Mode

Model: G20

cafd ID	Module	Group	Code	Mask	Function
00004508	DKOMBI4	3000 ‐ Anzeige_Konfiguration	CB_HUD_FAS	?????	Change to: nicht_aktiv [00]
00004508	DKOMBI4	3000 ‐ Anzeige_Konfiguration	CB_HUD_LIST_AUS	?????	Change to: aktiv [01]
00004508	DKOMBI4	3000 ‐ Anzeige_Konfiguration	CB_HUD_LIST_AUTOMATISCH	?????	Change to: aktiv [01]
00004508	DKOMBI4	3000 ‐ Anzeige_Konfiguration	CB_HUD_LIST_FAS_PERMANENT	?????	Change to: aktiv [01]
00004508	DKOMBI4	3000 ‐ Anzeige_Konfiguration	CB_HUD_LIST_SPORT_AUS	?????	Change to: nicht_aktiv [00]
00004508	DKOMBI4	3000 ‐ Anzeige_Konfiguration	CB_HUD_LIST_SPORT_FES	?????	Change to: nicht_aktiv [00]

Add to favorite G20 – Auto Steering Wheel heat

Model: G20

1. HU_MGU -> - -> AKT_Auto_Lenkrad -> - set to aktiv
2. BDC_BODY3 -> - -> LHZ_CCM_IKF -> - set to aktiv
3. BDC_BODY3 -> - -> IKF_ENABLE -> - set to ikf_alle_size

Add to favorite G20 – Seat Heating Distribution

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	?????	HVAC_SEATHEAT_DISTR_FRONT	?????	Change: nicht_aktiv to aktiv

Add to favorite G20 – Enable Sport Plus Mode

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3221 PfFesMaster	FesSportWorldMode1	?????	Change:SportDynamic to SportExpert
	00003E52	HU_MGU	3008 FES	FES_SPORT_EXPERT	?????	Change: nicht_aktiv to aktiv

Add to favorite G20 – Enable Comfort Plus Mode

Model: G20

cafd ID	Module	Group	Code	Mask	Function
CAFD_7083	BDC_BODY3	3221 PfFesMaster	ComfortWorldMode1	?????	Change to: ComfortPlus
00003E52	HU_MGU	3008 FES	FES_COMFORT_PLUS	?????	Change to: Active
00003E52	HU_MGU	3008 FES	ECO_CONF_STEERING_COMFPLUS	?????	Change to: Active
00003E52	HU_MGU	3008 FES	ECO_CONF_ATTENUATION_COMFPLUS	?????	Change to: Active

Add to favorite G20 – Enable Tailgate close with keyfob or switch (No holding)

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	000055D7	HKFM2	300B	HKL_REMOTECONTROLLIFTGATEBUTTON_BUTTON_TYPE	11111111b	>05<

Add to favorite G20 – Disable OBD2 Alarm

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00001D92	FZD2	3002 DWA / 3002	OBD_Alarm	00001000b	>00<

Add to favorite G20 – Enable Automatic Lane Change Assistant

Model: G20

1. [1/3] - BDC_BODY3 -> 3075 LceMaster / 3420 -> SPURWECHSEL_ASSISTENT -> nicht_activ set to activ
2. [2/3] - HU_MGU -> 300A SARAH / 300A -> SPURWECHSELASSISTENT -> nicht_activ set to gen_1
3. [3/3] - SAS2 -> 3000 -> C_SWA_VORHANDEN -> Nr000_nicht_vorhanden set to NR001_VORHANDEN

Add to favorite G20 – Change max volume retention to 50 percent

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E53	HU_MGU	3002	VOLUME_MAX_ON	11111111b	>32<

Add to favorite G20 – Disable Volume Popup Display

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	3002	VOLUME_POPUP_DISPLAY	10000000b	>nicht_aktiv<

Add to favorite G20 – Enable tire temperature and pressure display

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	3000	RDC_DRUCK_TEMP	00000011b	>druck_und_temperatur<

Add to favorite G20 – Change Startup Emblem

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
BMW M	00003E52	HU_MGU	3000	STARTUP_EMBLEM	00011110b	>bmw_m<
Rolls Royce	00003E52	HU_MGU	3000	STARTUP_EMBLEM	00011110b	>rr<
Alpina	00003E52	HU_MGU	3000	STARTUP_EMBLEM	00011110b	>alpina<
BMW	00003E52	HU_MGU	3000	STARTUP_EMBLEM	00011110b	>bmw<
BMW I	00003E52	HU_MGU	3000	STARTUP_EMBLEM	00011110b	>bmw_i<

Add to favorite G20 – Enable 5 click blinker option in Exterior Lighting settings

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	3000	5_FACH_TIPPBLINKEN	00000100b	>aktiv<

Add to favorite G20 – Enable Video In Motion

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
[1/2] Enable Video In Motion ‐ must do physical button combo to enable after coding.	00003E52	HU_MGU	3000	VIDEO_SPEEDLOCK_CONDITION	11111111b	>none<
[1/2]	00003E52	HU_MGU	3000	SPEEDLOCK_FREISCHALTMENU	10000000b	>aktiv<
[1/2]	00003E52	HU_MGU	3000	SPEEDLOCK_SPEEDVALUE_MIN	00011111b	>nicht_aktiv<
[1/2]	00003E52	HU_MGU	3000	SPEEDLOCK_SPEEDVALUE_MAX	00111111b	>nicht_aktiv<
[2/2] Enable Video In Motion ‐ must do physical button combo to enable after coding	00003E52	HU_MGU	3006	SPEEDLOCK_X_KMH_MIN	11111111b	>nicht_aktiv<
[2/2]	00003E52	HU_MGU	3006	SPEEDLOCK_X_KMH_MAX	11111111b	>nicht_aktiv<

Add to favorite G20 – Disable Legal Disclaimer Time

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	3000	LEGAL_DISCLAIMER_TIME	11111111b	>kein_ld<

Add to favorite G20 – HUD Distance Info

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	3000 HMI_SPEECH	HUD_DISTANCE_INFO	00000001b	>aktiv<

Add to favorite Disable Night Vision Legal Disclaimer

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00003E52	HU_MGU	300A SARAH	werte=00	11111111b	>kein_ld<

Add to favorite Enable Assisted Driver View [req 2019/07.xx+]

Model: G20

cafd ID	Module	Group	Code	Mask	Function
00004508	DKOMBI4	3000	SICHT_ABSICHT_ENABLE	00100000b	>01<
00004508	DKOMBI4	3000	CB_FZG_UMGEBUNG_FAS	00100000b	>01<
00004508	DKOMBI4	3000	CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG	00100000b	>01<
00004508	DKOMBI4	3007	PIA_FZG_UMGEBUNG_FAS	00000001b	>01<

Add to favorite Change Dash Layout and Logo to Alpina [req i‐step 2019/07.xx+]

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00004508	DKOMBI4	3001	LOGO_SCHRIFTZUG	11111111b	>alpina<
	00004508	DKOMBI4	3000	GLOBAL_LAYOUT_VARIANTE	11110000b	>alpina<

Add to favorite Change Dash Layout BMW M with no logo

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00004508	DKOMBI4	3001	LOGO_SCHRIFTZUG	11111111b	>kein_logo<
	00004508	DKOMBI4	3000	GLOBAL_LAYOUT_VARIANTE	11110000b	>m_gmbh<

Add to favorite Change Dash Layout and Logo to BMW M

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00004508	DKOMBI4	3001	LOGO_SCHRIFTZUG	11111111b	>m_logo<
	00004508	DKOMBI4	3000	GLOBAL_LAYOUT_VARIANTE	11110000b	>m_gmbh<

Add to favorite Disable Speedometer Correction

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00004508	DKOMBI4	3000	BC_V_KORREKTUR	01000000b	>ohne_korrektur<

Add to favorite Enable Sailing in Comfort Mode (optional)

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00004508	DKOMBI4	3001 Anzeige Konfiguration	SEGELN_IN_COMFORT_MODUS (optional)	00001000b	>01<

Add to favorite Disable Seatbelt Status in Dash

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00004508	DKOMBI4	3000 Anzeige Konfiguration	FOND_GURTSTATUS_ENABLE	00000111b	>inaktiv<

Add to favorite Enable Comfort Plus Mode options in Eco Pro Individual

Model: G20

cafd ID	Module	Group	Code	Mask	Function
00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>09<
00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>09<
00007083	BDC_BODY3	3221	FesComfortWorldMode1	11111111b	>05<
00007083	BDC_BODY3	3221	FesPiaDefaultComfortWorldMode	11111111b	>05<

Add to favorite Enable Comfort Plus Mode

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
[1/1]	00007083	BDC_BODY3	3221	FesSportWorldMode1	11111111b	>05<
[2/2]	00003E53	HU_MGU	3008	FES_COMFORT_PLUS	00100000b	>01< Change to: Active
[2/2]	00003E53	HU_MGU	3008	ECO_CONF_ATTENUATION_COMFPLUS	00100000b	>01< Change to: Active
[2/2]	00003E53	HU_MGU	3008	ECO_CONF_STEERING_COMFPLUS	01000000b	>01< Change to: Active

Add to favorite Enable Sport Plus Mode

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
1/1	00007083	BDC_BODY3	3221	FesSportWorldMode1	11111111b	>02<
2/2	00003E53	HU_MGU	3008	FES_SPORT_EXPERT	00000100b	>01< Change to: Active

Add to favorite G20 – Change startup mode

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
Adaptive	00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>0A<
Sport	00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>01<
Sport Individual	00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>03<
Comfort (default)	00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>04<
Eco Pro	00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>07<
Eco Pro Individual	00007083	BDC_BODY3	3221	FesPiaDefaultLastUserMode	11111111b	>09<

Add to favorite G20 – Mirror Tilt Angle

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
Mirror Tilt Angle 90 [default]	00007083	BDC_BODY3	3221 PfFesMaster/3110	ASP_BORDSTEINAUTOMATIK_DELTA	11111111b	>5A<
Mirror Tilt Angle 80	00007083	BDC_BODY3	3110	ASP_BORDSTEINAUTOMATIK_DELTA	11111111b	>50<
Mirror Tilt Angle 70	00007083	BDC_BODY3	3110	ASP_BORDSTEINAUTOMATIK_DELTA	11111111b	>46<
Mirror Tilt Angle 59	00007083	BDC_BODY3	3110	ASP_BORDSTEINAUTOMATIK_DELTA	11111111b	>3B<

Add to favorite Disable horn honk when locking doors with engine running

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3040 VaMaster	VAM_HORN_AT_SECURE	00000010b	>nicht_aktiv<

Add to favorite Emergency Brake Force Display ‐ Area Enlargement

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3075	GEFAHRENBREMSLICHT_TYP	01100000b	>flaechenvergroesserung<

Add to favorite Emergency Brake Force Display ‐ Flashing [Europe Default]

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3075	GEFAHRENBREMSLICHT_TYP	01100000b	>bremslicht_blinkend<

Add to favorite Emergency Brake Force Display ‐ Off [US Default]

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3075	GEFAHRENBREMSLICHT_TYP	01100000b	>nicht_aktiv<

Add to favorite Fog lights flash on alarm ‐ Alternating [Europe Default]

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3075	FERNLICHTBLINKEN_UEBERFALLALARM_BLINKMODUS	10000000b	>abwechseln<

Add to favorite Fog lights flash on alarm ‐ Simultaneous [US Default]

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	00007083	BDC_BODY3	3075 LceMaster	FERNLICHTBLINKEN_UEBERFALLALARM_BLINKMODUS	10000000b	>gleichzeitig<

Add to favorite Disable front windows rollup stopping when door opened

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	000044ED	BDC_BODY3	3510	FH_TUERAUF_STOP_MAUT	00000001b	>nicht_aktiv<

Add to favorite Allow closing of windows and sunroof with keyfob

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
	000044ED	BDC_BODY3	3510 PwFunction	FH_KOMFORTSCHLIESSUNG_FB	00100000b	aktiv

Add to favorite Enable Colder Air Conditioning

Model: G20

Description	cafd ID	Module	Group	Code	Mask	Function
[1/2] Enable Colder Air Conditioning	000051C9	IHKA4	3000	LAENDERVARIENTE	00000111b	02
[2/2] Enable Colder Air Conditioning	000051C9	IHKA4	3003	TEMPERATUR_OFFSET	00001111b	06

Add to favorite ALL Model Year 2021 coding – aSLA, TLA, etc

Model: G05

1. aSLA - BDC -> 7083 -> AUTOMATISCH -> nicht_aktiv set to aktiv
2. Forwardlooking - BDC -> 7083 -> STRECKEN_VERLAUF -> nicht_aktiv set to aktiv
3. Speed adjustment - BDC -> 7083 -> VORAUSSCHAU -> nicht_aktiv set to aktiv
4. Offset Slowly for speed assistant (SLA) In City - BDC -> 7083 -> VOFFSET_LANGSAM -> nicht_aktiv set to gen_1
5. Offset In City - BDC -> 7083 -> VOFFSET -> nicht_aktiv set to gen_1
6. Traffic Light Assistant - BDC -> 7083 -> AMPELN -> nicht_aktiv set to aktiv
7. Traffic Lights - BDC -> 7083 -> AMPEL_ASSISTENT -> nicht_aktiv set to aktiv
8. Reminder to set off again after light turns green - BDC -> 7083 -> ANFAHR_ERINNERUNG -> nicht_aktiv set to aktiv
9. Emergency lane formation - BDC -> 7083 -> AUSFAHRTEN -> nicht_aktiv set to aktiv
10. BDC -> 7083 -> DEFAULT_EINSTELLUNG_STL_BEI_TFL -> - set to aktiviert
11. Menu option to adjust distance based on situation - BDC -> 7083 -> SITUATIVER_ABSTAND -> nicht_aktiv set to aktiv
12. Enable/Disable undertaking - BDC -> 7083 -> EINSEITIG_VORBEIFAHREN -> nicht_aktiv set to aktiv
13. HU_MGU -> 3E52 -> SLAAUTOMATISCH -> nicht_aktiv set to gen_01
14. HU_MGU -> 3E52 -> STRECKENVERLAUF -> nicht_aktiv set to gen_01
15. HU_MGU -> 3E52 -> VORAUSSCHAU -> nicht_aktiv set to gen_01
16. Offset In City - HU_MGU -> 3E52 -> VOFFSET -> nicht_aktiv set to gen_1
17. *This flag describes whether Sight and Intention ("Sicht und Absicht") is built in or not.* - HU_MGU -> 3E52 -> SICHT_ABSICHT -> nicht_aktiv set to aktiv
18. *Control active DCA function depending on SA's in vehicle order including country control* - HU_MGU -> 3E52 -> DCA_STEUERUNG -> nicht_aktiv set to DCA_aktiv
19. HU_MGU -> 3E52 -> ADAS_2DH_HORIZON_EXTENSION -> - set to aktiv
20. HU_MGU -> 3E52 -> ADAS_OUTPUT_LANE_POS -> - set to aktiv
21. Traffic Light Assistant - HU_MGU -> 3E52 -> AMPELASSISTENT -> - set to gen_1
22. Traffic Lights - HU_MGU -> 3E52 -> AMPELN -> - set to gen_1
23. Reminder to set off again after light turns green - HU_MGU -> 3E52 -> ANFAHRERINNERUNG -> - set to gen_1
24. Enable/Disable undertaking - HU_MGU -> 3E52 -> EINSEITIGVORBEIFAHREN -> - set to gen_1
25. Option to form emergency lane - HU_MGU -> 3E52 -> RETTUNGSGASSE -> - set to aktiv
26. Menu option to adjust distance based on situation - HU_MGU -> 3E52 -> SITUATIVERABSTAND -> - set to gen_1
27. Route planning - HU_MGU -> 3E52 -> STRECKENVERLAUF_GENERATION -> gen_0 set to gen_1
28. Offset Slowly for speed assistant (SLA) In City - HU_MGU -> 3E52 -> VOFFSET_LANGSAM -> nicht_aktiv set to gen_1
29. SAS3 -> 42C1 -> C_SLA_Anzeige_Zusatztexte -> Nr000_deaktiviert set to Nr001_aktiviert
30. Speed Limit Assistant Active Countries - SAS3 -> 42C1 -> C_SLA_aSLA_Land_Aktiv -> 0F90F8600 set to 0xFFFFFFFF
31. SAS3 -> 42C1 -> C_SLA_Vorausschau_Land_aktiv -> - set to 0xFFFFFFFF
32. Speed Limit Assistant Distance Control enabled - SAS3 -> 42C1 -> C_SLA_Streckenregelung_vorhanden -> NR001_vorhanden set to NR_002_vorhanden_SLA_entkoppelt
33. Highway exit assistant - SAS3 -> 42C1 -> C_QmaN_Vorhanden -> - set to nr001_vorhanden
34. Option to form emergency lane - SAS3 -> 42C1 -> C_RGA_Funktion -> - set to Nr001_aktiviert
35. Undertaking options - SAS3 -> 42C1 -> C_Rechtsueberholen_verbieten -> - set to Nr001_aktiviert [01]
36. SAS3 -> 42C1 -> C_SLA_Streckenregelung_land_aktiv -> - set to FFFFFFFF
37. Urban Cruise Control - needed with TLA - SAS3 -> 42C1 -> C_UCC_vorhanden -> - set to Nr001_vorhanden [01]
38. SAS3 -> 42C1 -> EM_AdasIntegration_AdasExtendedPdu -> - set to enabled [01]
39. SAS3 -> 42C1 -> EM_ElectronicHorizon_MostProbablePathBending -> - set to kParameterSet01 [01]
40. Sets the capability by country for TLA/UCC, emergency lane - SAS3 -> 42C1 -> C_SLA_UCC_Land_aktiv -> - set to FFFFFFFF
41. SAS3 -> 42C1 -> C_SLA_aSLA_vorhanden -> Nr000_nicht_vorhanden set to Nr001_vorhanden
42. Highway exit assistant - SAS3 -> 42C1 -> C_SLA_QmaN_Land_aktiv -> FA, C3, 81, F8 set to FFFFFFFF
43. Further sets TLA/UCC to allow auto acceptance, emergency lane - SAS3 -> 42C1 -> C_SLA_aUCC_Land_aktiv -> - set to FFFFFFFF
44. Option to form emergency lane - SAS3 -> 42C1 -> C_RGA_Land_aktiv -> - set to FFFFFFFF
45. Option to form emergency lane - SAS3 -> 42C1 -> C_RGA_Seitenwahl_links_Land_aktiv -> - set to FFFFFFFF
46. Speed Limit Assistant Automatic Countries active - DSC_VIP -> 3D14 -> C_SLA_aSLA_Land_Aktiv -> 0F90F8600 set to 0XFFFFFFFF (Prob not needed for UK)
47. Speed Limit Assistant Distance Control enabled - DSC_VIP -> 3D14 -> C_SLA_Streckenregelung_vorhanden -> NR001_vorhanden set to NR_002_vorhanden_SLA_entkoppelt (requires >=1907)
48. Speed Limit Assistant Distance Control Active Countries - DSC_VIP -> 3D14 -> C_SLA_Streckenregelung_Land_Aktiv -> FFCF9FF8 set to 0XFFFFFFFF (Prob not needed for UK)
49. DSC_VIP -> 3D14 -> EM_ElectronicHorizon_MostProbablePathBending -> - set to kParameterSet01 (2007, 6U3 (live cockpit pro))
50. DSC_VIP -> 3D14 -> EM_AdasIntegration_AdasExtendedPdu -> - set to enabled (2007, 6U3 (live cockpit pro))
51. DSC_VIP -> 3D14 -> C_SLA_Vorausschau_Land_aktiv -> - set to 0XFFFFFFFF
52. Sets the capability by country for TLA/UCC - DSC_VIP -> 3D14 -> C_SLA_UCC_Land_aktiv -> Nr000_Bausteinpartitionierung set to 0XFFFFFFFF
53. activates full region unlock for GWW and WWA - needs FSC - KAFAS -> -> VFW_COUNTRY_VARIANT_MODE -> Baustand_1903 set to FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF, FF
54. Lane Departure Warning activation threshold - KAFAS -> 40F9 -> LDW_C_ELKA_DEB_DSI_DEACT_LMRE -> - set to TRUE (>=2007, reduces LDW if only 1 lane boundary detected)
55. Lane Departure Warning activation threshold - KAFAS -> 40F9 -> LDW_C_ELKA_DEB_DSI_ACTIV_LMRE -> - set to TRUE (>=2007, reduces LDW if only 1 lane boundary detected)
56. Lane Departure Warning activation threshold - KAFAS -> 40F9 -> LDW_C_RB_TYPE_NODSI_BITMASK -> - set to initwert - 15,00 (>=2007)

Add to favorite MY21 Driving Assistant Pro new features

Model: G05

1. Emergency lane formation - BDC -> 7083 -> AUSFAHRTEN -> nicht_aktiv set to aktiv
2. Menu option to adjust distance based on situation - BDC -> 7083 -> SITUATIVER_ABSTAND -> nicht_aktiv set to aktiv
3. Enable/Disable undertaking - BDC -> 7083 -> EINSEITIG_VORBEIFAHREN -> nicht_aktiv set to aktiv
4. Enable/Disable undertaking - HU_MGU -> 3E52 -> EINSEITIGVORBEIFAHREN -> - set to gen_1
5. Option to form emergency lane - HU_MGU -> 3E52 -> RETTUNGSGASSE -> - set to aktiv
6. Menu option to adjust distance based on situation - HU_MGU -> 3E52 -> SITUATIVERABSTAND -> - set to gen_1
7. Highway exit assistant - SAS3 -> 42C1 -> C_QmaN_Vorhanden -> - set to nr001_vorhanden
8. Option to form emergency lane - SAS3 -> 42C1 -> C_RGA_Funktion -> - set to Nr001_aktiviert
9. Undertaking options - SAS3 -> 42C1 -> C_Rechtsueberholen_verbieten -> - set to Nr001_aktiviert [01]
10. Highway exit assistant - SAS3 -> 42C1 -> C_SLA_QmaN_Land_aktiv -> FA, C3, 81, F8 set to FFFFFFFF
11. Option to form emergency lane - SAS3 -> 42C1 -> C_RGA_Land_aktiv -> - set to FFFFFFFF
12. Option to form emergency lane - SAS3 -> 42C1 -> C_RGA_Seitenwahl_links_Land_aktiv -> - set to FFFFFFFF

Add to favorite Traffic Light Assistant – needs aSLA coding and ‘Automatically adjust speed’ active in iDrive

Model: G05

1. Traffic Light Assistant - BDC -> 7083 -> AMPELN -> nicht_aktiv set to aktiv
2. Traffic Lights - BDC -> 7083 -> AMPEL_ASSISTENT -> nicht_aktiv set to aktiv
3. Reminder to set off again after light turns green - BDC -> 7083 -> ANFAHR_ERINNERUNG -> nicht_aktiv set to aktiv
4. Traffic Light Assistant - HU_MGU -> 3E52 -> AMPELASSISTENT -> - set to gen_1
5. Traffic Lights - HU_MGU -> 3E52 -> AMPELN -> - set to gen_1
6. Reminder to set off again after light turns green - HU_MGU -> 3E52 -> ANFAHRERINNERUNG -> - set to gen_1
7. Urban Cruise Control - needed with TLA - SAS3 -> 42C1 -> C_UCC_vorhanden -> - set to Nr001_vorhanden [01]
8. Sets the capability by country for TLA/UCC - SAS3 -> 42C1 -> C_SLA_UCC_Land_aktiv -> - set to FFFFFFFF
9. Further sets TLA/UCC to allow auto acceptance - SAS3 -> 42C1 -> C_SLA_aUCC_Land_aktiv -> - set to FFFFFFFF
10. Sets the capability by country for TLA/UCC - DSC_VIP -> 3D14 -> C_SLA_UCC_Land_aktiv -> Nr000_Bausteinpartitionierung set to 0XFFFFFFFF (probably not needed)

Notes:

Tested on i-step 07/2020 - Confirmed working in DE, US, UK. Does not work AUSY

Tested on i-step 11/2020 - confirmed working in UK

Add to favorite AUTO SPEED LIMIT ASSISTANT

Model: G05

1. aSLA - BDC -> 7083 -> AUTOMATISCH -> nicht_aktiv set to aktiv
2. Forwardlooking - BDC -> 7083 -> STRECKEN_VERLAUF -> nicht_aktiv set to aktiv
3. Speed adjustment - BDC -> 7083 -> VORAUSSCHAU -> nicht_aktiv set to aktiv
4. Extra +- speed setting up to 40mph for aSLA - BDC -> 7083 -> VOFFSET_LANGSAM -> nicht_aktiv set to gen_1
5. Extra +- speed setting up to 40mph for aSLA - BDC -> 7083 -> VOFFSET -> nicht_aktiv set to gen_1
6. HU_MGU -> 3E52 -> SLAAUTOMATISCH -> nicht_aktiv set to gen_01
7. HU_MGU -> 3E52 -> STRECKENVERLAUF -> nicht_aktiv set to gen_01
8. HU_MGU -> 3E52 -> VORAUSSCHAU -> nicht_aktiv set to gen_01
9. Extra +- speed setting up to 40mph for aSLA - HU_MGU -> 3E52 -> VOFFSET -> nicht_aktiv set to gen_1
10. Route planning - HU_MGU -> 3E52 -> STRECKENVERLAUF_GENERATION -> gen_0 set to gen_1
11. Extra +- speed setting up to 40mph for aSLA - HU_MGU -> 3E52 -> VOFFSET_LANGSAM -> nicht_aktiv set to gen_1
12. SAS3 -> 42C1 -> C_SLA_Anzeige_Zusatztexte -> Nr000_deaktiviert set to Nr001_aktiviert
13. Speed Limit Assistant Active Countries - SAS3 -> 42C1 -> C_SLA_aSLA_Land_Aktiv -> 0F90F8600 set to 0xFFFFFFFF
14. Speed Limit Assistant Perspective Active Countries - SAS3 -> 42C1 -> C_SLA_Vorausschau_Land_Aktiv -> FBDF87C0 set to 0xFFFFFFFF
15. Speed Limit Assistant Distance Control Active Countries - SAS3 -> 42C1 -> C_SLA_Streckenregelung_Land_Aktiv -> FFCF9FF8 set to 0xFFFFFFFF
16. Speed Limit Assistant Distance Control enabled - SAS3 -> 42C1 -> C_SLA_Streckenregelung_vorhanden -> NR001_vorhanden set to NR_002_vorhanden_SLA_entkoppelt
17. May not be required-code last if needed - SAS3 -> 42C1 -> C_SLA_Vorausschau_Land_aktiv_erweitert -> 0x00000000 set to FF, FF, FF, FF
18. May not be required-code last if needed - SAS3 -> 42C1 -> C_SLA_Streckenregelung_Land_Aktiv_erweitert -> 0x00000000 set to FF, FF, FF, FF
19. May not be required-code last if needed - SAS3 -> 42C1 -> C_Umschaltung_ACC_DCC -> Nr000_deaktiviert set to Nr001_aktiviert [01]
20. SAS3 -> 42C1 -> C_SLA_aSLA_vorhanden -> Nr000_nicht_vorhanden set to Nr001_vorhanden
21. DSC_VIP -> 3D14 -> C_SLA_Anzeige_Zusatztexte -> Nr000_deaktiviert set to Nr001_aktiviert
22. DSC_VIP -> 3D14 -> C_SLA_aSLA_vorhanden -> Nr000_nicht_vorhanden set to Nr001_vorhanden
23. Speed Limit Assistant Automatic Countries active - DSC_VIP -> 3D14 -> C_SLA_aSLA_Land_Aktiv -> 0F90F8600 set to 0xFFFFFFFF
24. Speed Limit Assistant Perspective Active Countries - DSC_VIP -> 3D14 -> C_SLA_Vorausschau_Land_Aktiv -> FBDF87C0 set to 0xFFFFFFFF
25. Speed Limit Assistant Distance Control enabled - DSC_VIP -> 3D14 -> C_SLA_Streckenregelung_vorhanden -> NR001_vorhanden set to NR_002_vorhanden_SLA_entkoppelt
26. Speed Limit Assistant Distance Control Active Countries - DSC_VIP -> 3D14 -> C_SLA_Streckenregelung_Land_Aktiv -> FFCF9FF8 set to 0xFFFFFFFF
27. May not be required-code last if needed - DSC_VIP -> 3D14 -> C_SLA_Vorausschau_Land_aktiv_erweitert -> 0x00000000 set to FF, FF, FF, FF
28. May not be required-code last if needed - DSC_VIP -> 3D14 -> C_SLA_Streckenregelung_Land_Aktiv_erweitert -> 0x00000000 set to 0xFFFFFFFF

Add to favorite Front Seat Ventilation Temperature

Model: G05

1. Front Seat Ventilation Temperature - SM2 -> 3008 -> SKL_TEMP_SOLL_ST1_KI -> werte=23 set to werte=19
2. [6d] driver side - SM2 -> 3008 -> SKL_TEMP_SOLL_ST2_KI -> werte=21 set to werte=14
3. [6e] passenger side - SM2 -> 3008 -> SKL_TEMP_SOLL_ST3_KI -> werte=1E set to werte=10
4. ST1 = position 1 - SM2 -> 3008 -> SKL_TEMP_SOLL_ST1_LE -> werte=23 set to werte=19
5. ST2 = position 2 - SM2 -> 3008 -> SKL_TEMP_SOLL_ST2_LE -> werte=21 set to werte=14
6. ST3 = position 3 - SM2 -> 3008 -> SKL_TEMP_SOLL_ST3_LE -> werte=1E set to werte=10

Add to favorite Eliminate Auto Park Warning

Model: G05

1. SAS3 -> 42C1 -> C_PMALQ_Disclaimer_Einparken -> Nr001_aktiviert set to Nr000_deaktiviert [00]

Add to favorite Improve eTJA+

Model: G05

1. SAS3 -> 42C1 -> C_HOO_Vorhanden -> Nr002_vorhanden_noStandby[02] set to Nr001_vorhanden_Standby [01]

Add to favorite Anti-Dazzle Settings for 3/2020 software and after

Model: G05

1. KAFAS4 -> 40F9 -> COUNTRY_VARIATION -> US_RC set to Europe_RC [01]
2. KAFAS4 -> 40F9 -> C_FLA_BS_ENTER_THRESH -> US set to Rest of world [03]
3. KAFAS4 -> 40F9 -> C_FLA_BS_EXIT_THRESH: -> US set to Rest of world [02]
4. KAFAS4 -> 40F9 -> C_FLA_CC_MESSAGE_3 -> CC_message_active set to no_CC_message [00]
5. KAFAS4 -> 40F9 -> C_FLA_US_SENSITIVITY_MODE -> US set to Normal [00]

Notes:

Requires Removal of 5AP from FA

Add to favorite Improve light sensitivity to reflectors

Model: G05

1. KAFAS4 -> 40F9 -> C_FLA_Country_With_Multiple_Reflectors -> Inactive set to aktiv

Add to favorite Enable Colder Air Conditioning

Model: G05

1. IHKA4 -> 3000 -> LAENDERVARIANTE -> US set to RoW[2]
2. IHKA4 -> 3004 -> TEMPERATUR_OFFSET -> - set to Offset_minus_1k

Add to favorite HUD Distance Info

Model: G05

1. HU_MGU -> 3.00E+52 -> HUD_DISTANCE_INFO -> - set to aktiv

Add to favorite Auto Temp Control for All Seats

Model: G05

1. HU_MGU -> 3.00E+52 -> AKT_AUTO_SITZE_FRONT -> nicht_aktiv set to heizung_kuelung
2. HU_MGU -> 3.00E+52 -> AKT_AUTO_SITZE_FOND -> nicht_aktiv set to heizung_kuelung
3. HU_MGU -> 3.00E+52 -> AKT_AUTO_LENKRADHEIZUNG -> nicht_aktiv set to aktiv

Add to favorite Enable 5 click blinker option

Model: G05

1. HU_MGU -> 3.00E+52 -> 5_FACH_TIPPBLINKEN -> nicht_aktiv set to aktiv

Add to favorite Allow Video Playback

Model: G05

1. HU_MGU -> 3.00E+52 -> VIDEO_SPEEDLOCK_CONDITION -> handbrake set to None
2. HU_MGU -> 3.00E+52 -> SPEEDLOCK_FREISCHALTMENU -> nicht_aktiv set to aktiv
3. HU_MGU -> 3.00E+52 -> SPEEDLOCK_SPEEDVALUE_MIN -> 3_kmh set to nicht_aktiv
4. HU_MGU -> 3.00E+52 -> SPEEDLOCK_SPEEDVALUE_MAX -> 5_kmh set to nicht_aktiv

Notes:

*** Push iDrive Controller Forward and keep holding, then press Media-Home-Media

Add to favorite Speedlock Text Length

Model: G05

1. HU_MGU -> 3.00E+52 -> SPEEDLOCK_TEXT_LENGTH -> 3_row set to whole_text

Add to favorite Tire Pressure and Temperature on Vehicle Status

Model: G05

1. HU_MGU -> 3.00E+52 -> RDC_DRUCK_TEMP -> druck set to druck_und_temperatur

Add to favorite Rear View Camera Zoom (trailer hitch)

Model: G05

1. HU_MGU -> 3.00E+52 -> MACRO_TRAILER_COUPLING -> nicht_aktiv set to aktiv

Add to favorite Navi zooms in when approaching a turn

Model: G05

1. HU_MGU -> 3.00E+52 -> NAVI_AUTOZOOM -> nicht_aktiv set to aktiv

Add to favorite Shows entire text message on iDrive rather than 3 lines

Model: G05

1. HU_MGU -> 3.00E+52 -> PIM_Driving_Text -> up_to_three_lines set to Whole_text

Add to favorite 6CP + 6NR + 6AP + 6AE: MGU Android Auto

Model: GX

1. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A -> - set to aktiv
2. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_ANDROID -> - set to aktiv
3. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_PIA -> - set to aktiv
4. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_REMOTE_APPS -> - set to aktiv
5. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_STT_SPELLER_INPUT -> - set to aktiv
6. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_SWT -> - set to aktiv
7. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_WIRELESS_ANDROID -> - set to aktiv
8. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_WIRELESS_IOS -> - set to aktiv
9. HU_MGU -> 3001_CONNECTIVITY_A4A -> REMOTE_HMI -> - set to aktiv
10. HU_MGU -> 3001_CONNECTIVITY_A4A -> WLAN_WIFI_MODE -> - set to ap+go
11. HU_MGU -> 3006_NAVIGATION -> SYSTEM_GPS_RECEIVER -> - set to nicht_aktiv
12. HU_MGU -> 3006_NAVIGATION -> TI_ONLINE -> - set to aktiv
13. HU_MGU -> 3003_TELEMATICS -> CONTACT_PICTURE_ONLINE_DOWNLOAD -> - set to aktiv
14. HU_MGU -> 3003_TELEMATICS -> CONTACTS_FROM_ONLINE_SOURCE -> - set to aktiv
15. HU_MGU -> 3003_TELEMATICS -> IPCE_WEBSERVER -> - set to aktiv
16. HU_MGU -> 3003_TELEMATICS -> ONLINE_SERVICES -> - set to aktiv
17. HU_MGU -> 3003_TELEMATICS -> ONLINE_SERVICES_GLS -> - set to aktiv
18. HU_MGU -> 3003_TELEMATICS -> TELEMATIC_ECU -> - set to aktiv
19. HU_MGU -> 3003_TELEMATICS -> WLAN_DIAGNOSE -> - set to aktiv

Add to favorite 6CP + 6NR: MGU Android Auto

Model: GX

1. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A -> - set to aktiv
2. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_ANDROID -> - set to aktiv
3. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_PIA -> - set to aktiv
4. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_REMOTE_APPS -> - set to aktiv
5. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_STT_SPELLER_INPUT -> - set to aktiv
6. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_SWT -> - set to aktiv
7. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_WIRELESS_ANDROID -> - set to aktiv
8. HU_MGU -> 3001_CONNECTIVITY_A4A -> A4A_WIRELESS_IOS -> - set to aktiv
9. HU_MGU -> 3001_CONNECTIVITY_A4A -> REMOTE_HMI -> - set to aktiv
10. HU_MGU -> 3001_CONNECTIVITY_A4A -> WLAN_WIFI_MODE -> - set to ap+go
11. HU_MGU -> 3004_SYSTEM_CONFIGURATION -> CARPLAY_SWT -> - set to aktiv
12. HU_MGU -> 3003_TELEMATICS -> CARPLAY_SWT -> - set to aktiv

Add to favorite 6CP: MGU Android Auto

Model: GX

1. HU_MGU -> 3001_CONNECTIVITY_A4A -> WLAN_WIFI_MODE -> - set to ap+go
2. HU_MGU -> 3004_SYSTEM_CONFIGURATION -> CARPLAY_SWT -> - set to aktiv
3. HU_MGU -> 3003_TELEMATICS -> WLAN_DIAGNOSE -> - set to aktiv

Add to favorite Disables Cameras legal disclaimer

Model: G05

1. HU_MGU -> 3.00E+52 -> MACRO_CAM_LEGALDISCLAIMER -> id_mit_timeout set to kein_ld
2. HU_MGU -> 3.00E+52 -> MACRO_NIVICAM_LDISCLAIMER -> id_mit_timeout set to kein_ld

Add to favorite G05 – Disables iDrive legal disclaimer

Model: G05

1. HU_MGU -> 3.00E+52 -> LEGAL_DISCLAIMER_TIME -> id_mit_timeout set to kein_ld

Add to favorite M Splash Screen

Model: G05

1. HU_MGU -> 3.00E+52 -> STARTUP_EMBLEM -> bmw set to bmw_m

Add to favorite Close Trunk via Pressing Inside Button Beeper

Model: G05

1. HKFM2 -> 55D7 -> HKL_ROCKERSWITCHPOS1_BEEPER_ACTIVE -> Wert_00 set to Wert_01

Add to favorite Close Trunk via Pressing Inside Button

Model: G05

1. HKFM2 -> 55D7 -> HKL_ROCKERSWITCHPOS1_BUTTON_TYPE -> Wert_02 set to Wert_03

Add to favorite Close Trunk via Keyfob Beeper

Model: G05

1. HKFM2 -> 55D7 -> HKL_REMOTECONTROLLIFTGATEBUTTON_BEEPER_ACTIVE -> Wert_00 set to Wert_01

Add to favorite Close Trunk via Keyfob

Model: G05

1. HKFM2 -> 55D7 -> HKL_REMOTECONTROLLIFTGATEBUTTON_BUTTON_TYPE -> Wert_02 set to Wert_05

Add to favorite Assisted Driving View

Model: G05

1. DKOMBI -> 4508 -> CB_FZG_UMGEBUNG_FAS -> nicht_aktiv set to aktiv
2. DKOMBI -> 4508 -> CB_PRESELECT_NAVI_ANSICHT_FZG_UMGEBUNG -> nicht_aktiv set to aktiv
3. DKOMBI -> 4508 -> PIA_FZG_UMGEBUNG_FAS -> nicht_aktiv set to aktiv
4. DKOMBI -> 4508 -> SICHT_ABSICHT_ENABLE -> nicht_aktiv set to aktiv

Add to favorite Alpina Cluster

Model: G05

1. DKOMBI -> 4508 -> ALPINA_ENABLE -> nicht_aktiv set to aktiv

Add to favorite M Dashboard

Model: G05

1. DKOMBI -> 4508 -> GLOBAL_LAYOUT_VARIANTE -> bmw set to m_gmbh

Add to favorite M Logo

Model: G05

1. DKOMBI -> 4508 -> LOGO_SCHRIFTZUG -> kein_logo set to msp_logo

Add to favorite VARIABLE LIGHT DISTRIBUTION

Model: G05

1. BDC_BODY3 -> 7083 -> AL_MODE_ECO -> ON_DIPB set to LOW_LEVEL_3_DIPB[03]
2. BDC_BODY3 -> 7083 -> LIN_VARIANTE_SZL -> ON_DIPB set to szl_r_HW_aic_4Band_fla[30]
3. BDC_BODY3 -> 1DF8 -> C_AFS_ECO_LEVEL_3_ENA -> disable set to enable
4. BDC_BODY3 -> 1DF8 -> C_AFS_ENA -> disable set to enable
5. BDC_BODY3 -> 1DF8 -> C_BLC_PRE_ENA -> disable set to enable
6. BDC_BODY3 -> 1DF8 -> C_CLC_BLINK_ENA -> disable set to enable
7. BDC_BODY3 -> 1DF8 -> C_CLC_CURV_V2 -> US set to ECE
8. BDC_BODY3 -> 1DF8 -> C_CLC_CURV_V3 -> US set to ECE
9. BDC_BODY3 -> 1DF8 -> C_CLC_EXT_ENA -> disable set to enable_roundabout
10. BDC_BODY3 -> 1DF8 -> C_CLC_REV_ENA -> disable set to enable
11. BDC_BODY3 -> 1DF8 -> C_HBA_GFHBA_ENA_V_HI -> 55km/h set to standard
12. BDC_BODY3 -> 1DF8 -> LUT_AFS_CODRV_HOR -> Laser_US/G007_US set to G05_Laser_ECE
13. BDC_BODY3 -> 1DF8 -> LUT_AFS_DRV_HOR -> Laser_US/G007_US set to G05_Laser_ECE
14. BDC_BODY3 -> 1DF8 -> LUT_FLC_FORWARDLIGHTING_Y -> no_AFS set to AFS[00, 00, 00]

Add to favorite Auto Temp Control for all seats

Model: G05

1. BDC_BODY3 -> 7083 -> IKF_ENABLE -> nicht_aktiv[00] set to ikf_alle_sitze
2. BDC_BODY3 -> 7083 -> LHZ_CCM_IKF -> nicht_aktiv[00] set to aktiv

Add to favorite Cornering Wizard always on not only whit signal light

Model: G05

1. BDC_BODY3 -> 7083 -> ASP_ABA_AKTIVIERUNG -> nicht_aktiv set to aktiv

Add to favorite Side mirror tilt angle

Model: G05

1. BDC_BODY3 -> 7083 -> Asp_bordsteinautomatik_delta -> - set to 5A

Notes:

5A = 90;
50=80;
46=70;
3B=59.

Add to favorite HBA Active When Headlights Manually On

Model: G05

1. BDC_BODY3 -> 7083 -> FLA_AKTIVIERUNG -> LDS in A set to LDS in A or 2

Add to favorite If you want to kill make your start-stop system remember your last setting

Model: GX

1. DME_BACK2 -> 3020 BSU_BEREICH -> TCM_MSA_MEMORY -> Wert_00 set to Wert_01

Add to favorite If you want you day time running lights to also turn on the rear lights (not brake lights obviously)

Model: GX

1. BDC_BODY3 -> -> DAYDRIVING_LIGHT -> - set to "Standard"/01
2. HU_MGU -> -> LIC_FEATURE_4 -> - set to "Enable"/01

Add to favorite If you have an aftermarket window tint, you should tell your car

Model: GX

1. BDC -> 3120 -> PfInternalMirror -> - set to dunkel

Add to favorite If your car has CarPlay enabled and it is not fullscreen already, you can change that

Model: GX

1. HU_NBT_EVO -> 3000_HMU -> CarPlay_Fullscreen -> - set to aktiv

Add to favorite If your car has foldable mirrors and you want them to immediately fold them once you lock the car without holding the lock button for three seconds, there isn’t an easy way.+ The only option you really have is reducing the holding time for the button to zero

Model: F3X

1. FEM_BODY -> -> Komfort_Schliessen -> 0F set to 00

Add to favorite Rain Light Sensor Reduced Sensitivity

Model: G05

1. BDC_BODY3 -> 7083 -> RLS_DEF_FLC_SCHWELLWERT_SATZ -> standard set to sehr_empfindlich

Add to favorite Turn Off Radio and GPS when engine off and driver door is open

Model: G05

1. BDC_BODY3 -> 7083 -> TCM_LOGIC_15_OFF_DOOR -> nicht_aktiv set to aktiv

Add to favorite Side Mirror Dimming Disable

Model: G05

1. BDC_BODY3 -> 7083 -> ASP_ELEKTROCHROM_SPIEGELGLAS -> aktiv set to nicht_aktiv

Add to favorite Enables fog lights to be on with parking lights

Model: G05

1. BDC_BODY3 -> 7083 -> NSW_EIN_AUF_LDS_STL -> nicht_aktiv set to aktiv

Add to favorite Enables Fog Lights with High Beams / Flashers

Model: G05

1. BDC_BODY3 -> 7083 -> NSW_AUS_BEI_FL -> aktiv set to nicht_aktiv

Add to favorite Remember Last Driving Mode

Model: G05

1. BDC_BODY3 -> 7083 -> FesLastFunctionInterval -> nicht_aktiv set to werte=255

Add to favorite G05 – Default Driving Mode

Model: G05

1. BDC_BODY3 -> 7083 -> FesPiaDefaultLastUserMode -> werte=04 set to werte=01

Notes:

01-Sport;
02-Sport+;
03-Sport Individual;
04-Comfort;
05-Comfort+;
06-Comfort Individual;
07-Eco;
08-Eco+;
09-Eco Individual;
0A-Adaptive.

Add to favorite Allow closing of windows and sunroof with keyfob

Model: G05

1. BDC_BODY3 -> 44ED -> FH_KOMFORTSCHLIESSUNG_FB -> nicht_aktiv set to aktiv

Add to favorite Opening doors will not interrupt window roll up operation

Model: G05

1. BDC_BODY3 -> 44ED -> FH_TUERAUF_STOP_MAUT -> aktiv set to nicht_aktiv

Add to favorite Active PDC with Brake Intervention

Model: G05

1. ACSM -> 1B2D -> a_pdc -> Initwert set to aktiv
2. ACSM -> 1B2D -> a_pdc_fp -> Initwert set to aktiv
3. HU_MGU -> 3.00E+52 -> ACTIVE_PDC -> Default set to aktiv

Add to favorite Seat Belt Display – Passenger

Model: G05

1. ACSM -> 1B29 -> SbrDispBltStPasEnb -> nicht_aktiv set to aktiv

Add to favorite Seat Belt Display – Driver

Model: G05

1. ACSM -> 1B29 -> SbrDispBltStDriveEnb -> nicht_aktiv set to aktiv

Add to favorite Initial Seatbelt Warning

Model: G05

1. ACSM -> 1B29 -> SbrIwEnb -> aktiv set to nicht_aktiv

Add to favorite Deactivate Seatbelt Warning – Passenger

Model: G05

1. ACSM -> 1B29 -> SbrVariantPas -> SBR_mit_SBE set to SBR_deaktiviert_ohne_SBE

Add to favorite Deactivate Seatbelt Warning – Driver

Model: G05

1. ACSM -> 1B29 -> SbrVariantDriv -> SBR_ohne_SBE set to SBR_deaktiviert_ohne_SBE